Skip to Content

Can I use an old drawer as a planter?

Yes, you can definitely use an old drawer as a planter. Many people in fact make creative planters out of old drawers. Before using an old drawer as a planter make sure you give it a good clean and check for any holes or wear and tear that may make water escape from the planter.

You’ll also want to make sure that the bottom of the drawer is sealed. If there are any holes in the bottom of the drawer consider sealing them with epoxy or similar. Once the drawer is properly sealed, you can add potting soil, choose your plants, and get creative with decorating the planter.

You may need to drill a few holes in the drawer for drainage. Consider coating the drawer with wood sealant to protect the wood from water damage. Finally, if using an old metal drawer, you’ll want to make sure it is properly sealed with an enamel paint to make sure it doesn’t rust.

How do you grow plants in a drawer?

Growing plants in a drawer is a fun and creative way to bring plants into a space without taking up a lot of room. First, you’ll need to select the right drawer. The drawer should be deep enough to allow your plants enough room to grow.

Make sure the drawer is well-ventilated so the plants don’t become too humid. Then, to get started, add a layer of soil and use a trowel to create a hole in the soil for each plant. When you place your plants, remember to take note of their individual needs and make sure the light, temperature and water requirements are met.

Add a few pebbles or a rock in the bottom of the drawer for drainage. Lastly, water your plants regularly and mist the drawer often to keep your plants happy and healthy. With the proper care, you’ll soon have a flourishing garden in your very own drawer!.

How do you make a planter box out of a drawer?

Making a planter box out of a drawer is a great way to upcycle an old piece of furniture and give it a new life. Here are the steps to making a planter box out of a drawer:

1. Get a good-sized drawer that’s already in good condition. You’ll want one that’s large enough to fit whatever size planter box you want to make.

2. Clean out the drawer and remove any hardware such as handles, hinges, or drawer glide tracks.

3. Sand down the surface of the drawer and use a wood cleaner to remove any dirt or grime.

4. To create the planter box, cut four pieces of wood to match the size of the drawer. Attach the pieces together using screws and wood glue to form a box shape that fits inside the drawer. Make sure to leave enough space between each piece so that the soil and plants can fit inside the box.

5. Add a thin layer of gravel to the bottom of the planter box to help with drainage.

6. Fill the planter box with potting mix, making sure to leave enough space for plants.

7. Plant your chosen plants in the planter box and finish off with a thin layer of compost or mulch.

8. Place the planter box back inside the drawer and put the drawer in its new home. Enjoy your upcycled planter box!

Can you use an old dresser as a raised garden bed?

Yes, you can use an old dresser as a raised garden bed. All you need is a wooden dresser, soil, plants, and some basic tools. You’ll also want to make sure that the dresser is not made of treated wood, since the chemicals can be detrimental to your plants.

You can also waterproof it with a lining and seal it for extra protection. To start, remove the drawers and carefully measure the inside of the dresser frame. This will be how much soil you’ll need for the garden bed.

You’ll then want to attach the soil with a liner and secure it in place. Once this is done, add the plants and then secure the drawers back in place. This will help keep the soil from falling out. Lastly, make sure you water the garden bed regularly and that the dresser is secure and doesn’t wobble.

With a little bit of effort, you’ll soon have the perfect raised garden bed that looks stylish and provides you with a great place to plant all your favorite flowers, herbs, and vegetables.

How do you make a dresser into a planter?

Making a dresser into a planter is relatively easy and can be achieved in a few steps. First, you’ll need to remove the drawers of the dresser and set them aside. Next, if you don’t want the entire exterior to become a planter, you may wish to prime or paint the dresser.

This is not necessary, but can give it a unique aesthetic. Once that is done, mount some board on the bottom of the dresser for the plants to sit on. You can do this with some small nails or screws. Make sure you stagger the boards on the bottom to create a stable platform for the plants to sit.

Now, you’ll need to build a structure keeping the plants contained in the drawers. To do this, use wood, plexiglass, or plastic that can be cut to the size of the dresser drawers. You can also use window screens, lattice, and other similar materials.

After that is done, the next step is to make the actual planter boxes for the dresser using whatever material you have. This can be plastic or metal. Add your soil and plants and you’re done. You can also add some decorations around the planter to make it look even more amazing.

This is a great way to repurpose an old dresser and give your home a unique touch.

What can I make out of an old dresser?

You can repurpose an old dresser in many interesting and unique ways. For instance, if you’re looking to add some extra storage to your home, you can keep the dresser as is and simply use it as storage.

You can also repurpose it into a kitchen island or a bench by replacing the drawers with slatted shelves or adding drawers and storage to the bottom. You can also repurpose an old dresser into a vanity by adding a mirror to the top and drawers to the sides.

Depending on the size and condition of the dresser, you can also turn it into a bookshelf, an entertainment center, a end table, or even a planter for your garden. With a little creativity and some DIY know-how, you can make old dressers into virtually anything!.

How do I use old garden furniture?

If you’re looking to use old garden furniture, the best way is to assess the condition of the furniture and then make any necessary repairs. First, check to see if any pieces are damaged or rotting. If so, decide whether it would be more cost-effective to repair them or to fully replace them with brand new ones.

If your furniture is structurally sound, you might just need some minor repairs and a few coats of paint to give them a fresh and new look.

If the furniture is made of wood, sand and prepare the surfaces. Apply a coat of primer and then two top coats of outdoor paint. If it’s made of metal, simply clean the surface with soap and water, and then paint with a light coat of metal paint and a clear coat.

Once you have the furniture all fixed up and looking as good as new, it’s time to start decorating. A few throws and cushions can transform your garden space and help to make your old furniture look fresh and modern.

The good thing about buying vintage furniture is that it’s unique and comes with a timeless element. If you can find furniture that has lovely detailing, it can be a great way to add personality and charm to your outdoor space.

How do you build a raised bed with storage underneath?

Building a raised bed with storage underneath is a great way to make the most of your outdoor space. It adds additional garden area, allows for more efficient use of water and fertilizer, and adds a useful storage space for gardening tools and supplies.

To get started, you will need to create a box frame for the raised bed, paint or stain it to protect it from weather damage, and then attach raised bed liner. At the same time, you’ll want to measure out the space for storage and build a box frame for it.

Depending on the size and type of storage you’re wanting, you may want to frame your storage area with pressure-treated lumber. This will keep it from rotting over time.

Once your frames are finished, you should position the raised bed in its desired location and then fill the raised bed with soil. With the raised bed in place, you can then add your desired storage. Depending on your needs, you may be able to use a large plastic storage bin placed under the raised bed, or you can build deeper shelves or structerures.

Be sure to attach them securely to the frame, and remember to provide some aeration by drilling a few small holes in the bottom of the container.

From there, you’ll be able to garden and store items with ease. Enjoy your raised bed with convenient storage!

Do I need to replace soil in raised bed?

It depends on what type of soil is currently in your raised bed. Generally, soil should be replaced when the soil does not have a balanced texture, is not nutrient rich, or has become compacted with heavy use.

If your soil is lacking in any of these areas you may benefit from replacing it. Replacing the soil in a raised bed can be done in one of two ways; you can purchase pre-made soil and fill your bed with that, or you can mix together your own soil using a combination of topsoil, compost, and other soil amendments.

The type of soil you choose will be determined by the type of plants you will be growing as well as your climate and soil conditions. Additionally, you may also need to replace the soil every few years in order to maintain its fertility.

What is the material to make a raised garden bed?

Creating a raised garden bed can be an excellent way to make use of limited space, improve drainage and soil quality, and grow a wide variety of plants. Generally speaking, the best materials to use for a raised garden bed are those that are sturdy, durable, cost-effective, and safe for plants and people.

Timber is a popular choice for raised beds since it’s relatively inexpensive and long-lasting. Cedar and redwood are naturally rot-resistant, so these woods work well for raised beds. However, treated lumber is also an option.

As long as it is labeled as “ground contact” grade, with the chemicals used in the treating process approved by the Environmental Protection Agency, treated lumber can be considered safe for use in a raised bed, as long as you don’t plan to grow edible plants in the bed.

If you’re looking for an alternative to timber, you can also construct raised beds out of brick, stone, composite boards, or even reclaimed materials, such as pallets and shipping crates. Composite boards are a great choice for raised garden beds because they are more rot and mildew resistant than wood, and they don’t require any maintenance or periodic treatments.

No matter what material you use for your raised garden bed, make sure it is safe for plants and people. Additionally, be mindful of the soil quality and moisture level of your garden bed when choosing materials and putting together your raised bed design.

Can you use old treated wood for raised beds?

Yes, you can use old treated wood for raised beds but it is important to consider the type of treated wood you are using. Pressure treated woods that were made before 2004 will contain higher amounts of arsenic.

Arsenic is a potent toxin that can be very harmful to humans and animals. Therefore, if you choose to use old treated wood in your raised beds, it’s best to contact a professional to have it tested for arsenic levels.

They will be able to recommend the best course of action for safely using the wood in your raised beds. It’s important to remember that even low levels of arsenic can be harmful with prolonged exposure.

Therefore, if you choose to use old treated wood for raised beds, it’s important to make sure that any contact with the wood is limited. You should also use a thick liner of untreated wood chips, mulch, gravel or other material between the treated wood and the soil.

This can help to reduce the risk of arsenic leaching into the soil and polluting your garden.

Is Treated wood toxic for gardens?

Treated wood can be toxic for gardens depending on the type of treatment used. Pressure-treated wood has been used widely in the past to build decks, fences and other structures, but it contains chemicals that can leach into the soil and contaminate plants.

The chemical most commonly used is chromated copper arsenate (CCA) which is known to be carcinogenic, neurotoxic, and can harm wildlife. As a result, most countries have now banned its use in residential areas.

On the other hand, newer forms of treated wood such as alkaline copper quaternary (ACQ) and copper azole (CBA) are recognized as safe for gardens and have been approved by the Environmental Protection Agency (EPA).

These forms are generally more expensive than CCA-treated wood, but they do not contain the same dangerous chemicals and will not harm the environment.

So, if you are planning a garden project that requires treated wood, it is important to make sure that you are using an approved type of treatment. This will help ensure that your garden remains safe and free from contamination.

How long will untreated wood last in raised beds?

Untreated wood in raised beds can last for a long time depending on the species of wood used as well as the location and environment of the bed. Cedar, redwood, and cypress are examples of wood that have natural oils and resins that provide them with a resistance to decay and pests.

These woods can last 10-20 years or more when untreated. Other woods such as spruce, pine, and fir may last longer if treated with a sealant to waterproof them and guard against pests. The quality of the wood and the level of exposure to weather, sun, and water all have a big impact on the longevity of wood in raised beds.

In general, if the wood in raised beds isn’t properly protected it will only last 1-5 years depending on the climate and environment it is in.

Is it safe to use old pressure treated wood?

The short answer is yes, but with caution. Old pressure treated wood is generally still safe to use, as the chemicals used to treat the wood are generally EPA approved and regulated. However, due to changes in the chemical formulations over the years, you’ll want to take extra precaution when handling and using old pressure treated wood.

For example, if using the wood for a project such as a garden bed, make sure to line the bottom with landscape fabric or a plastic barrier to prevent soil exposure to the wood. You should also opt for low-VOC finishes when painting or staining.

Wear a face mask, gloves, and safety glasses when sanding and working with the wood as well. Be sure to check labels on the wood when you purchase it to make sure you know what kind of treatment is on it.

Finally, never burn pressure treated wood, since the chemicals can be released into the environment through smoke.

Is Lowes pressure treated wood safe for gardens?

Yes, Lowes pressure treated wood is generally safe to use in gardens and outdoor projects. Pressure treated wood is infused with preservatives to make it highly resistant to rot, decay, and insects. It is typically made from softwood like pine or spruce that has been treated with a waterborne preservative.

This treatment process is regulated by various wood standards and is regularly inspected to ensure it meets safety standards. Pressure treated wood is ideal for outdoor use in gardens and other landscaping projects, as it holds up well against exposure to the elements.

Furthermore, preservatives used to treat the wood are usually safe for gardens, as many of them are made from water-based compounds, rather than oil-based. Some preservatives can be toxic for plants, though, so it is important to double-check the label when purchasing pressure treated wood for use in the garden.

Are treated landscape timbers safe for vegetable gardens?

Yes, treated landscape timbers are generally safe to use in vegetable gardens. The chemical preservatives used to treat the wood are typically safe for vegetable gardens, as the chemicals are not absorbable, or very minimally absorbable, and won’t leach into the soil or your plants.

Also, treated wood breaks down slowly, meaning it will still provide structural support for your garden for many years. In addition, treated wood is a great choice for raised garden beds as it will resist rot and decay, ensuring your garden beds stand strong for many years.

Lastly, it’s important to note that some treated landscape timbers may use non-organic chemicals and may be hazardous to vegetable gardens, so it’s best to research the particular timber you are considering and make sure that it is safe for vegetable gardens.

What can I use instead of a planter box?

There are plenty of options if you are looking to switch up your garden planter box or simply don’t have the space for one. Hanging wall planters can be a great alternative if you’re short on space; they usually take up much less space than a conventional planter box and are just as easy to keep alive.

If you don’t have a patio or balcony, you can alternatively use window boxes and hang them outside a window to build your own herb or flower garden.

For a bit of color to your outdoor space, you can also opt for colorful flower pots. Smaller pots can be lined up and hung from a wall or railing to create a powerful visual effect with minimal work or space used.

Place two or three pots of the same or different sizes next to each other and create an attractive pattern. For a smaller garden, you can use large terracotta pots placed in the corners.

Raised beds are also gaining in popularity and can be built right into the garden. This is thought to help build a healthier soil environment, as well as make plants easier to access. It also adds a special feature to the garden, with wooden setups giving an organic feel.

The bottom line is that there is no shortage of options when it comes to finding a planter box alternative; find a way to use any unused space as well as a few garden-building techniques, and you’re sure to end up with something unique and eye-catching.

What do you put in the bottom of a planter without drainage holes?

In planters without drainage holes, the bottom should be filled with a material to create an efficient drainage system. Materials such as pebbles, rocks, or foam pieces can be used to create a makeshift drainage system, allowing water to seep through the material and to the bottom of the planter.

The type of material used should depend on the size and weight of the planter. Larger, heavier planters should have a base of pebbles or rocks on the bottom of the planter. They should be placed in a single layer in the bottom, preventing water from pooling in the pot.

In smaller or lightweight planters, foam pieces can be used to make a drainage system. They should be large enough that they do not move or float around in the pot when it is watered. Foam is also an excellent material for creating an aerated base that can help wick away excess moisture.

When creating a drainage system, it’s important to layer the materials. For example, if pebbles are used, place a layer of soil over the pebbles before the plants are put in. This will prevent the pebbles from up-rooting the plants.

It’s also good practice to add a layer of mulch between the plants and the soil to prevent moisture from evaporating too quickly.

Creating a drainage system with the materials mentioned is an easy and effective way to prevent plant roots from becoming waterlogged in planters without drainage holes.