Yes, Samsung can remove activation lock through its Find My Mobile service. Find My Mobile is an online service offered by Samsung that allows you to remotely locate, lock, and/or erase data stored on your devices.
Once you have registered for the service, you can use it to perform a variety of tasks, including remotely unlocking your device and removing the activation lock. To do this, simply log in to your Samsung account, navigate to the “Find My Mobile” area, and select the device that you need to remove the lock from.
Once this is done, a message will be sent to your device that will prompt you to enter the same PIN that was used when you first set up the device. Once this is done, the activation lock will be removed and your device will be unlocked.
How do you bypass the activation screen on a Samsung?
In order to bypass the activation screen on a Samsung device, you will need to perform a hard reset to restore the device to factory settings.
To begin, locate the reset hole which is usually located either on the left or right side of the device and use a small tool such as a paper clip to press and hold the reset button.
Once the device is powered down, it will prompt you to enter into a recovery mode. To do this, press and hold the Volume Up, Home and Power buttons at the same time, and then the device will boot up into recovery mode.
From there, you can navigate using the Volume Up and Volume Down buttons to select the ‘Wipe Data/Factory Reset’ and press the Home Key to confirm.
Once that is completed, you will be able to start up your device again, and it should no longer prompt you with the activation screen. You can now use the device as before.
Can Samsung account be bypassed?
No, a Samsung account cannot be bypassed without the correct identification credentials. Your Samsung account is a secure and convenient way to access various Samsung services, such as Samsung Pay, and cannot be bypassed without the correct identification credentials.
These credentials typically include a username or email address and a password. If you have forgotten your Samsung account credentials, you can reset your password from Samsung’s Find Your Account page.
You may also be able to recover your account credentials if you have enabled two-step verification for your account.
How do I disable reactivation lock?
Reactivation lock is a security feature that Apple users can activate on their iOS devices to securely lock their device and help protect against unauthorized access. To disable reactivation lock on your iOS device, you will need to sign in to the device with your Apple ID and enter the password associated with that ID.
Once you have entered the password, the reactivation lock will be disabled and you will be able to use the device normally. In addition to this, you can also go to the Setting app, select “iCloud”, and then toggle the “Find My iPhone/iPad” option to “Off”.
Doing this will also disable the reactivation lock. As a final step, you can also go to Settings > General > Reset and then select “Erase All Content And Settings” to completely erase all content from the device, which will also disable the reactivation lock.
Can FRP lock be removed?
Yes, an FRP Lock can be removed. FRP stands for Factory Reset Protection and is enabled on most Android devices to prevent unauthorized access and keep data safe. If you want to remove the FRP Lock, you may need to perform specific tasks depending on the device and its software version.
Generally speaking, the easiest way to remove a FRP Lock is to reset the device to its factory settings. This can easily be done by going to the device’s settings, clicking on the “Backup & Reset” or “Reset” option, and selecting the “Erase all data (Factory reset)” option.
Keep in mind that performing a Factory Reset will erase all the data from the device so make sure to backup any files or information you want to keep before doing so. Alternatively, many newer models offer FRP bypass tools that allow you to reset the device without having to provide the Google account credentials.
Doing a search online for the exact type of device and software version you have can provide you with step-by-step instructions for using any available FRP bypass tool.
How do you wipe a locked phone?
If your phone is locked, and you need to wipe it, your best bet would be to factory reset the device. This will erase all data and settings, essentially wiping the phone clean. You can do this in the settings menu of your device.
However, you will need to know the lock screen password or have the device unlocked first in order to access the settings menu. If you don’t know the lock screen password and don’t have the device unlocked, you can find the instructions specific to the device’s operating system, to perform the factory reset via the recovery menu.
This can typically be accessed by keeping certain buttons pressed in combination when booting the device.
Alternatively, if you are having trouble accessing the settings menu, you can download and install a mobile device management (MDM) application on your phone. The MDM application will allow you to remotely access the device, and if it is supported, you can issue a factory reset command from the MDM software, thus wiping the device even with it being locked.
It is important to note that the factory reset and MDM applications will require an active internet connection on the device. It is also advisable to back up any valuable data before taking any of the steps mentioned above, as any data saved on the device will be permanently lost.
How do I turn off reactivation lock on Android?
Reactivation lock is a security feature on Android devices that helps protect your phone if it is ever lost or stolen. To turn it off, open the Settings menu on your Android device. From there, select “Security” and then “Reactivation Lock”.
You will then be asked if you want to enable or disable the feature. After making your selection, follow the rest of the on-screen instructions. Once complete, the reactivation lock should be disabled and your device should be less vulnerable to theft and loss.
How do I get past Verizon activation screen?
The Verizon activation screen is designed to help you connect to the Verizon network after you have purchased a device or SIM card and installed it. To get past the activation screen, you will need to have the necessary credentials to use the Verizon network, including a phone number and activation code.
You will also need to know your device’s IMEI or MEID number.
Once you have these credentials, you can begin the activation process. Depending on the device you have, this may include setting up a Verizon account or signing into your existing Verizon account. Once you have successfully logged in, you will be taken to the activation page and will be asked to enter in your phone number, activation code, and IMEI/MEID number.
After submitting this information, an activation code may be required which you can enter into the activation screen. If you have everything set up correctly, the Verizon activation screen should be resolved and you should be able to access the Verizon network.
If the activation screen does not go away, then you may need to contact Verizon customer service to help you troubleshoot and resolve the issue.
How do I get rid of setup wizard activation incomplete?
First, reboot your device and restart the Android setup process from the beginning. Make sure to follow the setup instructions carefully and ensure that all the necessary information is entered correctly.
If you are connected to the internet, try turning off your Wi-Fi or mobile data and then turning it back on again. The error can be caused by an unreliable internet connection, so this step can help.
If that didn’t work, it may be helpful to clear the cache and data from your device. To do this, go to Settings > Applications > Application Manager, then locate and select the “Setup Wizard” app. Then tap on “Storage” and select “Clear Cache” and “Clear Data”.
You can also try wiping the cache partition of your device. To do this, you normally need to press and hold the Volume Up, Home and Power buttons for a few seconds, then your device should enter into its recovery mode.
From there, use the volume buttons to navigate and select “wipe cache partition”. Alternatively, you could use a system cleaner app to wipe the cache.
If none of the above steps worked, it may be necessary to perform a factory reset of your device. Be aware that factory resetting will delete all of your data, so make sure you have backed up all of your important files beforehand.
To perform a factory reset, go to Settings > Backup & Reset > Factory Data Reset, then select “Reset phone”.
If none of these steps worked, you may need to contact your device manufacturer for assistance. They may be able to provide troubleshooting steps specific to your device.
How do I force Verizon to activate a phone?
If you’re having trouble activating your Verizon phone, the first step is to contact Verizon customer service. You can reach them at 1-800-922-0204. In some cases, they may be able to activate your phone over the phone.
If they can’t, they may suggest that you email them a copy of your proof of purchase and a photo of your Driver’s License.
You can also visit a local Verizon store and have a representative activate your phone for you. Make sure to have your proof of purchase, Driver’s License, and any other needed documents when you visit.
Keep in mind that the phone you’re trying to activate may need to be unlocked before it can be activated. If you purchased your phone from another carrier, it’s a good idea to check if it needs to be unlocked before starting the activation process.
If you’ve contacted customer service or visited a Verizon store, but still can’t get your phone activated, it may be due to a technical issue. Contact Verizon technical support at 1-800-VERIZON (1-800-837-4966).
They can help you troubleshoot any issue that is preventing your phone from activating.
What is the 3 digit number to activate a Verizon phone?
The three digit number to activate a Verizon phone is 115. This number can be used to activate your Verizon device, whether it be a new phone, tablet or wearable. After dialing 115, you will be asked to provide your device’s SIM card number.
Once you have provided the number, your device will be activated and ready for use.
Why is * 228 not allowed?
*228 is not allowed because it is a specific sequence of numbers used by cellular providers to update the phones on their networks. This process is typically done automatically by the carrier, but if * 228 is used, it could interfere with the carriers’ ability to update the phones.
Additionally, * 228 is not a standard telephone number and as such, it cannot be dialed directly. As such, it is not generally supported by phone companies and is not allowed to be dialed.
Why is my Verizon phone not activating?
The most common explanation is that the phone you’re trying to activate is not compatible with the Verizon network. To confirm that your phone is compatible, please check the device’s serial number with your carrier or online.
Other potential issues include a lack of coverage in your area, a SIM card that is not properly inserted, or a purchase of the wrong type of plan. Additionally, your phone may need to be turned off and on again to reactivate.
If you are still unable to activate your phone, please contact your Verizon provider for further assistance in troubleshooting the issue.
How do I activate this phone?
This depends on the specific phone, but in general, you will need to take a few steps to activate your new device.
First, you will need to make sure you have the correct SIM card, if applicable, for your phone. The SIM card contains vital information that allows your phone to connect to your phone carrier and activate the device.
Once you have the right card, you can install it into the device by inserting it into the SIM card slot located on the side or back of your phone.
Next, you will need to charge the battery of your phone so it has some power to be able to initiate the activation process. If your phone doesn’t have a battery and requires your charge it through the provided cable, make sure you plug it in to a power source and wait until it is fully charged before proceeding.
After the device has been charged, you will now be ready to activate the phone. This process can be completed either online or through a phone call to your carrier, depending on the phone and the carrier.
If activating online, look for “activate” or “activate now” (or something similar) on your carrier’s website. You may need to create a new account or log in to an existing one to complete the activation.
Once you have done this, you will be asked to enter the phone’s information and/or serial number, as well as the SIM card’s ICCID. After doing this, the process should be complete and your phone is now activated.
If you choose to call your carrier to activate the device, they will provide you a number to call and an activation code. Once you have the code, call the number and follow the steps provided. They will likely ask you to provide the phone’s information and/or serial number, as well as the SIM card’s ICCID.
Once these steps have been completed, your phone is now activated.
No matter which method you choose to activate your device, make sure you have all of the necessary information beforehand so that the process can go smoothly.
Can you reactivate a Samsung account?
Yes, it is possible to reactivate a Samsung account. To do so, simply log into your account and select the reactivation option. Depending on the type of Samsung account, you may be asked to answer a few questions.
Once these are answered, you should be able to complete the reactivation process. If for any reason the reactivation process does not work, then you may need to contact the Samsung customer service team for further assistance.
What is Samsung factory reset protection?
Samsung Factory Reset Protection (FRP) is a security feature built into Samsung devices that helps to protect your device from unauthorized access if it is ever lost or stolen. FRP requires that you enter your Google account credentials in order to reset the device and gain access to it.
This way, if your device is ever lost or stolen, you can easily reset it and make sure that no one else can gain access to your data. With FRP, if someone else tries to reset your device, they will need to enter your Google credentials to do so and without them, the device will remain locked and inaccessible.
