Yes, you can add handles to IKEA cabinets. IKEA cabinets come with holes pre-drilled to fit handle hardware, so you don’t even need to drill holes for screws. Some IKEA cabinets come with handles, but if you’re looking for something more decorative or specific to your needs, you can easily add your own handles to IKEA cabinets.
Choose from a variety of handle options, including knobs, pulls and bar handles, to match your cabinet doors and drawers. To add handles to IKEA cabinets, you will need to purchase mounting hardware and screws, as well as the handles you select.
You may also want to use a power drill if the screws require pre-drilling. To install the handles, simply loosen the screws on the handle mounting screws, hold the handle in place, and then re-tighten the screws to secure the handle.
How do I add pulls to my IKEA dresser?
Adding pulls to your IKEA dresser is fairly simple. First, you’ll need to purchase some pulls that you would like to use from your local hardware store. Once you have them, you’ll want to ensure the pulls fit the holes in the drawer fronts.
If the holes are too large for the screws included with your pulls, you’ll need to purchase additional screws. Once you have a snug fit, you can begin attaching your pulls.
To attach the pulls, you’ll want to line the holes up with the screws on the back of the pulls, then use a screwdriver to tighten the screws into place. You’ll want to make sure to not over-tighten the screws, as this can cause the pulls to pull away from the dresser.
Once all the screws are in place, you can admire your new IKEA dresser with the added pulls!.
Do Blum hinges fit IKEA cabinets?
Yes, Blum hinges can fit IKEA cabinets. Blum is a top manufacturer for cabinet hinges worldwide, and many IKEA drawers and cabinet doors use these hinges. The hinges have a special place system that is designed to work with the frames and doors of IKEA cabinets, so finding the right fit is straightforward.
As long as the hinge size is compatible with the IKEA cabinet, they should fit and provide superior performance.
Can I replace IKEA knobs?
Yes, it is possible to replace IKEA knobs in certain situations. Generally, the knobs used on IKEA furniture are standard, which means they are readily available at most home improvement stores or online.
If you find a knob that matches, you can usually just unscrew the existing knob and screw in the new one. If you can’t find an exact match, check out options for universal replacement knobs that may fit your IKEA piece and look more like what you had in mind for the project.
To make sure it fits properly, you may need to measure the diameter and the distance between the screws and find the corresponding measurements for your new knobs. It’s also important to check the material that the knobs are made from and compare them to the knobs you plan on replacing them with, making sure that they are the same material.
If in doubt, you can always check with an IKEA store or customer service line to locate the exact part or a compatible replacement to ensure a perfect fit.
How can I make my IKEA look more expensive?
One way to make an IKEA-furnished space look more expensive is to use accessories and decor to add texture and visual interest to the space. Adding a few designer pieces, such as a luxury throw blanket, a unique vase, or a custom artwork, can give the space an elevated look.
You can also add wall art — either framed pictures or hanging canvases — to incorporate visual texture and draw the eye up. For example, adding a large, framed mirror to a wall can open up the space and give it a more luxurious feel.
If you’re looking to add a bit more color, choose a few colorful accessories that complement each other and your furniture. Pillows and cushions are a great way to incorporate a pop of color while adding comfort to the space.
You can also add a statement rug to the floor — it’s a great way to tie all the design elements together.
In addition to accessories and decor, you can also make IKEA-furnished space feel more expensive by painting the walls and replacing lighting fixtures and hardware. Painting your walls a lighter color or even a deep navy can give the space luxurious and stylish feel.
Adding a statement pendant light or changing the cabinet hardware can also instantly elevate the space.
How do you replace dresser handles?
Replacing dresser handles is a relatively straightforward process. Here’s how to do it:
1. Start by removing the old handles. If you’re replacing existing handles, you’ll have to unscrew the existing handles and disconnect them from the dresser. Drawers and cabinet doors will usually have screws on the inside or outside of each handle.
2. Measure the centers of the dresser’s drawer or door and mark them with a pencil. This will help you to properly align the new handles.
3. Select the new handles. It’s important to get ones that are the appropriate size, so measure the height, width and depth of the holes cut in the dresser before you purchase new handles.
4. Attach the new handles to the dresser. Place the handles in the exact spot you marked on the dresser and screw them in securely.
5. Test the dresser to ensure the new handles are working properly. Open and close the door and drawers to make sure the handles are secured and that the drawer or door opens and closes properly. If everything is working, your dresser handles are all set!.
How do you change drawer pulls to knobs?
Changing drawer pulls to knobs is not a difficult project and can be accomplished with a few simple steps.
The first step is to remove the existing drawer pull by either unscrewing it or by using a flathead screwdriver or knife to gently pry it up from the drawer. When removing the pull, you will need to take note of the holes on the drawer front, as the new knob will need to fit the same hole pattern.
After the old pull has been removed, the holes should be measured to ascertain the size of screws needed for attaching the new knob. Most new knobs come with screws, but if they do not fit the holes, they will need to be purchased separately.
When the new screws have been acquired, the knob can then be attached. It may be helpful to gently hammer the screws into the wood or use a power drill. After the screws have been tightened, the remaining excess material can be trimmed with a knife.
Finally, to secure the knob, the screws should be tightened until the knob is secure.
In summary, changing drawer pulls to knobs requires removing the existing pull, measuring the holes for the screws, securing new screws, attaching the new knob and then tightening the screws. If done properly, this process will help to revitalize the appearance of the drawers.
How do you remove hardware from a dresser?
Removing hardware from a dresser requires several tools and steps to ensure that the dresser remains structurally sound during the removal process.
To begin, you will need a Phillips or flathead screwdriver to remove the screws from the back of the dresser that hold the hardware in place. Make sure to remove the screws in an orderly fashion, setting aside each screw as it’s removed to prevent the hardware from becoming mixed up.
Once the screws are removed, carefully lift the hardware off of the dresser.
You may also need to use a pair of pliers to remove the knob, knob base, and other pieces of hardware that may be screwed into the dresser. Those pieces can be tricky to remove so be careful not to put too much pressure on the hardware while it is being removed.
Finally, check the dresser to make sure that all of the hardware has been removed and that no small pieces are left behind. Then you can begin the process of reinstalling the new hardware on the dresser.
What is more popular knobs or pulls?
It really depends on the application. Pulls are generally more popular for furniture, such as dressers, armoires, and cabinets, since they allow for easy grasping and opening of drawers. Knobs are usually more popular on doors, cabinets, and other surfaces that don’t open, as they can be easier to turn than pulls.
They are also more popular for children’s furniture, such as dressers and toy chests, as little hands can more easily grip round or cylindrical knobs than handles or rings. Ultimately, the best choice depends on the look you are going for and the function you are after – some people may prefer the look of pulls, while others may prefer the functionality of knobs.
It also comes down to personal preference.
Are knobs or pulls more modern?
When it comes to knobs vs pulls in a modern setting, it really depends on the overall look and style of the room. Pulls tend to be the more modern choice, but knobs can also work in some modern designs.
Knobs are generally more traditional and can be used to add a rustic feel to a space, while pulls have a sleeker, more modern design. Depending on the aesthetics of the room, one of these styles may be more appropriate than the other.
Ultimately choosing between knobs or pulls for a modern look comes down to personal preference and the overall style of the space.
What looks better on kitchen cabinets knobs or handles?
It really depends on personal preference, as both knobs and handles can look great on kitchen cabinets. Knobs can give a space a more streamlined look and can be modern or classic depending on the material, finish and style.
Handles can provide a more traditional and polished look, or a more contemporary or industrial feel. It’s important to keep the overall look of your kitchen in mind when deciding. The puling handles you choose may be the same color, material, and finish as the cabinet doors, or a complimentary look.
If the cabinets have detailed stiles, mouldings, or beading, a complimenting knob might look more complementary. Generally, cabinets which are more traditional in style may opt for handles, while more contemporary cabinets may opt for knobs.
In the end, it is a personal choice and there is no wrong answer.
Should I put handles on my kitchen cabinets?
It ultimately depends on your personal preference, but there are a few considerations that could sway your decision to add handles to your kitchen cabinets.
Aesthetically, handles provide a neat, polished look to kitchen cabinet doors. They are also easy to grab when opening and closing the cabinets. Handles are used frequently throughout the day when preparing meals and can become a focal point for the kitchen.
There is a wide variety of handles available, meaning you can customize the look of your cabinets.
However, handles may not be ideal for everyone. Some people prefer a streamlined, handle-less look with integrated push-in latches for easier access. Installing push-in latches is more costly than using handles and may cause damage to the cabinets if not done correctly.
Push-in latches also take up more space than handles, which may be a concern in kitchens with limited space.
In conclusion, it is up to you to decide if you would like to add handles to your kitchen cabinets. Considering the aesthetic appeal, functionality, cost, and space available will all be factors in your decision.
What hardware looks on white cabinets?
When it comes to hardware for white cabinets, there are a wide range of options. Some of the most popular styles include chrome, stainless steel, brass, and pewter. Chrome is an ideal choice for modern and contemporary designs, while brass and pewter are great for more traditional and vintage styles.
If you want to add a touch of personality, opt for brushed nickel or oil-rubbed bronze. To complete the look of your white cabinets, consider incorporating coordinating pulls, knobs and hinges that fit the overall design of your space.
Does cabinet hardware need to match door knobs?
No, there is no rule that says cabinet hardware needs to match door knobs. It is entirely a matter of personal taste and style. Generally speaking, matching door knobs and cabinet hardware can create a more polished and cohesive look that ties the entire room together.
On the other hand, delicately selecting different hardware for each door and cabinet can also create an interesting, custom look. Ultimately, it is up to the home owner to decide which option works best in their home.