Skip to Content

Can you dilute Thompson’s water sealer?

Yes, you can dilute Thompson’s Water Sealer. The exact dilution ratio will depend on the type of Thompson’s Water Sealer product you are using. Generally, Thompson’s liquid water repellents should be diluted with up to 50% of clean water before applying, whereas for aerosol water repellents, no dilution is required.

It is important to read the product label and follow the manufacturer’s instructions for use before diluting. Additionally, you should always test the mixture on a small area to check for its suitability before application on large surfaces.

Is Thompson’s water Seal water based or oil based?

Thompson’s Water Seal is a water-based sealant, made with a mixture of synthetic resins, oils, and additives. It is designed to provide a barrier which protects the underlying surface from water damage and decay, while also allowing water to escape.

The sealant can be used on masonry, wood and other surfaces to protect them from corrosion and other outside elements. Thompson’s Water Seal is also environmentally friendly, with biodegradable components that are safe for people, animals, and plants.

It is not an oil-based product, and does not contain any petroleum derived hazardous air pollutants.

How long does Thompson Water Seal last on wood?

Thompson Water Seal typically lasts for up to 10 years when applied correctly on most wood surfaces. It is important to choose the right product for your surface and the climate in which you live. Depending on the exposure to the elements, frequency of maintenance and the grade of the product, the duration of the sealant may vary.

In addition to applying the proper amount, it is essential to ensure that the surface is clean, dry and free of dirt and debris in order to maximize the effectiveness and longevity of the sealer. Thompson Water Seal provides a variety of wood care products that are designed to perform in different climates and environments.

Thompson Water Seal products are made with a waterproofing agent that penetrates into the surface of the wood to create a durable, protective barrier against water, sun and weather damage.

What is Thompsons Water Seal made of?

Thomson’s Water Seal is a water-based sealant made of a blend of acrylic polymers resins, silicones, and paraffin-based waxes. It’s typically used as a waterproofing sealant for concrete and masonry structures and surfaces.

During the application of the sealant, the resins and paraffinic waxes in the sealant are applied to the surface, reducing water permeability while allowing the absorbed water vapor to pass through. As the resins dry, the sealant creates a strong, waterproof bond which prevents water and weather elements from penetrating the surface.

The silicone element creates a slick and slick surface that resists dirt and grime build-up and makes cleaning the surface easier. Additionally, the sealant enhances the color of the surface due to its reflective qualities.

Does Thompsons Water Seal have silicone in it?

No, Thompson’s Water Seal does not contain silicone. The company offers a variety of specialized sealers, including water-based, oil-based, tinted, and clear sealers, that are designed to protect decks, fences and furniture from the harsh elements.

Most of these sealers are made from either acrylic or polyurethane and occasionally other additives such as paraffin wax or flour, but never silicone. Silicone is not an ideal material for outdoor sealers since it is not very durable in extreme temperatures or weather conditons, and is therefore not included in any of Thompson’s Water Seal products.

Should I use Thompson water Seal on pressure treated wood?

Yes, you can use Thompson Water Seal on pressure treated wood. Pressure-treated wood is already treated with preservatives to help protect it against rot and insects, but it still benefits from the additional protection that a sealant like Thompson Water Seal provides.

Thompson Water Seal helps keep the wood watertight and prevents it from deteriorating. It also adds an attractive finish to the wood, making it look better and last longer. To apply the sealant, make sure that the wood is clean and free of any dirt or debris before you begin.

Then read and follow the instructions on the product label closely to ensure you are using the sealant correctly. Also, be sure to wear protective equipment, such as safety glasses and gloves. When applied correctly, Thompson Water Seal provides an effective barrier against water and other elements, helping preserve the life of your pressure-treated wood.

Is it better to spray or roll on Thompson Water Seal?

The answer to this question depends on what you are looking to achieve. Both spraying and rolling on Thompson’s Water Seal can be effective for achieving additional waterproofing on exterior surfaces.

Spraying is often a much quicker option since it allows you to cover a larger area in less time and with less effort. Because of this, it’s often the preferred method for large areas like decking or a garage floor.

Rolling may be preferred for smaller areas or surfaces with detailed patterns since you have more control of where the sealant goes. However, it can be time-consuming and you may require a ladder or other tool to access higher surfaces.

Ultimately, the method you use depends on what surface you are working on and what level of protection you are trying to achieve.

How do you apply Thompson’s Wood Sealer?

Applying Thompson’s Wood Sealer is an easy process that will give your wood surfaces the protection they need to prevent damage and discoloration.

First, thoroughly clean the wood surface with a damp rag, making sure to remove all dirt and debris. Then, allow the wood to dry completely before applying the sealer. Once the wood surface is dry, you can apply Thompson’s Wood Sealer with a natural bristle paintbrush or a high-quality roller.

Start in a top corner of the surface and work down and out making sure to spread the sealer evenly and close to the edges. Use as many layers of sealer as necessary, allowing adequate drying time between each layer (usually 4-6 hours).

Once the sealer is dry, buff the surface with a soft cloth to achieve a smooth finish.

Finally, make sure to follow the guidelines on the sealer’s packaging to maintain the best results possible. Wood sealer should be reapplied every two to three years to ensure optimal protection of your wood surfaces.

Can I apply Thompson’s Water Seal with a cloth?

Yes, you can apply Thompson’s Water Seal with a cloth. It’s important to make sure that your cloth is dry and lint-free, so that it won’t mar the sealant. First, take your cloth and turn it inside out.

Dab it lightly in the sealant and start to apply it to the surface in an even coat. You want to ensure that you cover the entire surface with an adequate layer of the sealant. Keep in mind that the material you are sealing should be completely dry and free of dirt, dust, and other loose particles.

When you are finished, let the sealant dry for the specified amount of time, usually overnight. After it has dried, you can rest assured that your surface is now water-resistant, so it will be able to protect against moisture for years to come.

Should I put two coats of sealer on my deck?

Yes, it is recommended that two coats of sealer be applied to your deck. This will provide increased protection from the elements, as well as add to the overall aesthetic of the deck. The first coat should be a penetrating sealer that will penetrate into the wood fibers, helping to protect the wood from the elements, and the second coat should be a top coat that will provide additional protection and a finished look.

When applying the sealer, it is important to follow the manufacturer’s instructions closely and allow adequate drying time in between coats.