Skip to Content

Can you use peel and stick wallpaper around fireplace?

Yes, you can use peel and stick wallpaper around a fireplace. This type of wallpaper has a number of advantages over traditional wallpaper. Traditional wallpaper requires a bit of preparation to be applied successfully.

You would need to prepare the wall thoroughly by making sure it is clean, smooth, and dry before pasting it. After pasting, you would also need to use a seam roller to ensure a tight seal around the edges and along the seams.

With peel and stick wallpaper, you do not need to perform any of these steps. All you need to do is identify the starting point, peel off the backing, and adhere the strip to the wall. The wallpaper adheres thanks to its adhesive backing, which means you can skip the tedious preparation process.

Plus, it can be applied to a variety of surfaces, including brick, wood and stucco, so it can easily be used around fireplaces. Furthermore, it is very easy to remove, so you can easily switch up your design when you want to.

How do I cover my fireplace walls?

To cover your fireplace walls, you have a few options. The most common option is to use drywall or plaster to cover the walls. This will give you a solid, flat surface to which you can nail or screw various materials.

You can also use tile to cover the walls. Tile provides a more finished look while also making it easier to clean. Another option is to use stone veneer. This is a great option if you want the look of a real stone fireplace without the expense.

Finally, you can use wainscot paneling to cover your walls. This is an easy way to add texture and style to your fireplace walls.

How can I make my fireplace look better?

The first is to make sure that it is properly maintained and cleaned. You should hire a chimney sweep to inspect your fireplace and chimney to make sure it is in proper working order. Additionally, make sure that the brick and mortar around the fireplace is in good condition and fully sealed.

The second step is to make sure the fireplace insert or firebox is clean. Remove soot and ash with a vacuum, broom, and shovel. If the firebox is metal, use a soft cloth and mild detergent to clean it thoroughly.

When all the dirt and dust is removed, clean the entire area with a damp cloth.

The third step is to add accessories to your fireplace. You can add logs, stones, tiles, and other decorative elements that add texture and character to the room. Consider adding candle holders, fireplace screens, and even fireplace tools.

These can add to the overall look and feel of the fireplace area.

Finally, you can paint the fireplace to give it a fresh look. For a professional finish, hire a painter who knows how to use a high heat paint. You can also buy special high heat fire resistant spray paints in a variety of colors to paint the fireplace yourself.

By following these steps, you can make your fireplace look better and make sure it is operating safely.

Is peel and stick wallpaper heat resistant?

No, peel and stick wallpaper is not heat resistant. It is made from a vinyl material, so moisture and heat might cause it to warp or buckle. Vaporex, a vinyl-type wallpaper, is more heat and moisture-resistant, but it has a slick, glossy finish that may not be suitable for all types of interior design.

For added heat and moisture resistance, some vinyl wallpapers are available with a fabric backing. Before hanging, check the manufacturer’s instructions to make sure the wallpaper is appropriate for your environment.

What can I cover my brick walls with?

Covering brick walls is a great way to change the look and feel of a room. Depending on your budget and preferences.

One option is to use a textured wallpaper or wallcovering, such as grasscloth. These add a visual texture to the wall and create an interesting look that still allows the look and feel of the brick to show through.

Another way to cover brick walls is to use paneling. This is often made from wood, such as pine, cedar, or fir. It comes in a variety of colors and styles, so it can be easily customized to match the furniture and decor in the room.

A third option is to paint the walls. This can be a cost-effective and affordable option, but you will need to take care when applying the paint so as not to completely cover the brick. If you want to keep some of the natural look of the brick, use a semi-gloss or satin paint, which will allow the texture of the brick to still show.

Finally, you could install fabric paneling or tapestries on the walls to give the room a softer, warmer feel. This is an especially good option if you want to create a cozy atmosphere in the room.

No matter which option you choose for covering your brick walls, make sure to create a space that is both beautiful and functional.

How do you modernize a fireplace on a budget?

If you are looking to modernize your fireplace on a budget, there are many simple and cost-effective solutions. One option is to paint the brick either a lighter shade or even white for a dramatic transformation that won’t break the bank.

This gives the fireplace a much fresher and more modern feel. For added texture, paneling can be installed around the fireplace, or ceramic tiles that match the existing décor, for a professional look all on a budget.

Installing a sleek and modern fireplace insert can also provide added function, as well as a stylish new look. Another budget-friendly modern update is to create simple but eye-catching mantel displays with details like jars full of stones, dried flowers or candles, which are inexpensive and can really modernize your fireplace.

Updating the accessories around the fireplace can also make a big difference. By switching out old candle holders and adding other decorative items, such as wooden accent trays, the fireplace can gain fresh and inviting style.

How do I update my 1970s stone fireplace?

Updating a 1970s stone fireplace can be a rewarding, but also challenging, project. It all begins with getting familiar with the materials that were used to build the fireplace in the 1970s, so that you can make informed decisions about which materials and techniques to use in the updating process.

One great way to start is by cleaning the stone fireplace, both inside and out, removing moss, dirt, soot, and any other debris. This will help clarity of all the details and you can see clearly what material has been used.

The next step is to add texture and color to the stone surface. This can be done through a variety of methods like sponging or sandstone as an overlay. You can also faux finish the stone in various colors, textures and patterns to add that depth of character and style.

The stone can then be treated with a stain or sealant, which can enhance and protect the stone further. Make sure to do a little research on the best products for the types of stone used.

Next, you can add decorative accents to dress up the fireplace like a mantle, faux brick work, elaborate trim, tile work and addition of accessories like candle holders, mirrors, and more.

Finally, you can also look into improvements like updating the hearth, adding a fan to increase airflow, and replacing any outdated lighting fixtures. Installing a plasma TV over the fireplace and optimizing the overall design of the fireplace may be possible options as well.

These are just a few ideas for updating a 1970s stone fireplace – there are endless possibilities and ways to let your creativity a imagination to flow. With a bit of research, and some thoughtful work, your updated fireplace can not only be beautiful, but also bring back the cherished memories of the past.

Can you change the color of a stone fireplace?

Yes, it is possible to change the color of a stone fireplace. Depending on the type of stone you have and the condition it is in, there are several ways to go about painting it. If you have a rough, porous stone, you will need to use a masonry primer and a specialized masonry paint.

This type of paint adheres better to the stone surface and helps prevent cracking and fading. For a smoother, more polished stone, you can use latex paint. Be sure to use a high-quality primer beforehand to ensure the paint will last and not flake off.

If you’re unsure of which paint and primer to use, specialty paint stores offer a variety of masonry and latex paint specific to stone surfaces.

Can a stone fireplace be painted?

Yes, a stone fireplace can be painted. The type of paint and method of application depends on the type of stone used. Natural stone fireplaces can be painted with oil- or latex-based paint and a roller or brush, depending on texture and size of the fireplace.

Faux stone can be painted with a latex paint and a foam roller or brush. Some stones may require a bonding primer to ensure the paint adheres to the stone properly. Additionally, the surface must be thoroughly cleaned before painting to get rid of any contaminants that may prevent the paint from sticking.

If needed, patch any holes in the stone with putty. Once all the preparation work is done, at least two coats of paint should be applied, allowing each coat to dry before the next is applied.

Do you start in the middle when wallpapering?

No, it’s not recommended to start in the middle when wallpapering. Generally, when hanging wallpaper, you should start in a corner. When beginning in a corner it’s easier to get accurate measurements and keep the seams aligned properly.

When hanging wallpaper in a room, it’s best to divide the walls into thirds, either horizontally or vertically. Start in one corner of one of the outer thirds, measure and cut the paper accordingly, and hang the paper evenly.

Working outward from the corner will ensure that all the seams match up and that the wallpaper hangs evenly on the walls. It’s also important to note that when using paste-the-wall wallpaper, the edges should overlap onto the adjacent panel by around 4-6mm.

Do you Overlap wallpaper?

Yes, it is possible to overlap wallpaper. When overlapping wallpaper, it’s important to make sure that the pattern is aligned correctly and that both pieces fit closely together. Additionally, making sure that your surface is properly prepared and that the wallpaper is rolled correctly and evenly is important to ensure a successful overlap.

When overlapping the pieces, use a seam roller to press down the edges and ensure the pieces are firmly and securely adhered. When overlapping wallpaper seams can often become visible which is why it’s important to take your time and make sure the pieces fit closely.

Additionally, using a seam roller to press both sides of the seam can also help to minimize any visible signs of the overlap.

When wallpapering where should you start?

When wallpapering, it is important to start in the most visible corner of the room. Starting in the hardest to reach corner can cause problems later on. To ensure the wallpaper is aligned properly, it is best to draw a vertical line starting in the corner and up the length of the wall or measure out a section to ensure accuracy in placement.

Start in the corner and ensure that the edges of the wallpaper meet properly. Start with a dry run to ensure the pattern isn’t off and that the paper lines up on all the corners. Always begin wallpapering at the edge of the wall.

When walls are pieced, always begin at the centre of each wall working outward to ensure an even look. For walls that are highly visible and feature the pattern prominently, it is important to maintain a tight pattern match.

Match the pattern at each ceiling, floor and window wall junction to ensure the pattern at each corner lines up perfectly. Make sure to use a sharp, retractable knife for clean, accurate trimming. Once the wall has been papered, inspect for any imperfections.

Be sure to fill any bubbles or bumps with special paste and excess paste should be wiped off.

Where do you start when wallpapering a feature wall?

When wallpapering a feature wall, the first step is to make sure you have all the necessary tools and materials. This includes the right type of wallpaper, paste, a ruler, scissors, a wallpaper brush, a stepladder, a seam roller, and a pencil.

You’ll also need your choice of wallpaper, a damp cloth, and a bucket of clean water.

Once you have all your supplies, the next step is to determine the starting height of the wallpaper. Most feature walls are usually started at the top and work downward, so measure the wall at the highest point and mark it as your starting point.

The next step is to prepare the wall for the wallpaper. This includes removing old wallpaper, debris, or paint, and washing the wall with a damp cloth. If you have paint, apply a coat of primer ahead of time to help the wallpaper adhere better.

You should then measure the wall area where the wallpaper will be for the most accurate fit, and then cut the wallpaper accordingly. Apply a thin layer of pasting to the back of the wallpaper, and carefully place it onto the wall.

Starting from the center and working up and outwards, use a wallpaper brush to brush away any air bubbles that may develop.

Once the paper is in place and dry, use a seam roller over the areas where the paper meets to ensure the wallpaper is sealed properly. Finally, if needed, you can use a damp cloth to remove any excess paste or residues.