Yes, wood is commonly used to make a fireplace surround. Fireplace surrounds are normally composed of some sort of wood, wooden paneling, or stone, and the selection is really a matter of preference and style.
When using wood for your fireplace surround, be sure it is a durable type of wood that is meant for regular high heat exposure, such as hardwoods like hickory, cherry, ash, or oak. You may also need to have your wood treated with a fire retardant.
Additionally, you may want to consider having a fireproof panel installed along the bottom of the surrounds near the hearth, as a natural precaution. Keep in mind that the hearth should always be made out of heat resistant material like ceramic, marble, or slate.
Can you put wood trim around a gas fireplace?
Yes, you can put wood trim around a gas fireplace. For a professional and clean look, you should first measure the area of the gas fireplace that you wish to trim. Make sure to add additional measurements for different types of wood trim so that you have enough width or length when cutting and assembling the wood trim pieces.
You will then need to purchase the wood trim pieces and typically, you will need to pre-paint them before you install them. Once the wood trim pieces have been pre-painted, you can use a brad nailer to securely attach them to the gas fireplace.
Make sure to use a protecting sealant such as silicone caulk to adhere the trim to the fireplace. This will prevent any moisture or heat from building up around the gas fireplace. Lastly, you can use putty to fill in any of the nail holes to complete the look.
Can you change the surround of a fireplace?
Yes, you can change the surround of a fireplace. Depending on the type of fireplace you have, there are several ways of doing this.
For a traditional masonry fireplace, you could either tile or stone the surround or build a new surround from scratch using lumber and moulding. If you are working with an existing surround, you could reface it by removing the existing material and replacing it with stone veneer or thin brick.
For a factory-built fireplace, there are typically metal panels which can be attached to the existing surround. These panels are available in a variety of finishes and colours, so it is easy to create a new look for your fireplace.
Regardless of the type of fireplace, you will want to make sure it is properly sealed to prevent draft and maintain a safe operating environment.
How do you revamp a fireplace surround?
If you want to revamp your fireplace surround, there are a few steps you can take to give it a fresh new look. First, start by clearing away any debris and items around the hearth. Then, assess the condition of the existing fireplace surround.
If it is solid and structurally sound, you can begin your revamp without having to adjust or repair the existing materials.
Once you have a clean surface, you can choose a finishing material for the fireplace surround. This could be anything from tile, brick, or stone to painted brick, ceramic, or even wood beams. You’ll need to consider the ambiance you want your fireplace to create and the overall aesthetic of the space.
If you select a finish that will require a significant installation process, like tile or brick, be sure to consult with a professional to ensure the job is done correctly and safely. Following the installation, you can accessorize the space with items like candles, bookshelves, and other decorative items that fit your style.
If desired, you can also choose a mantel for the top of the mantel. Consider the overall look you are trying to achieve—modern, rustic, traditional, ornate, or sleek—when selecting the mantel.
Finally, you may want to consider adding a set of metal grates on either side of the fireplace to give it a finished look. These grates can protect the fireplace unit from potential fire issues and can either be installed in the tile or brick or as a stand-alone item in front of the fireplace.
By following these simple steps, you can successfully revamp your fireplace surround and create a beautiful, functional space you and your family will enjoy for years to come.
How do you Modernise a brick fireplace?
Modernizing a brick fireplace is a great way to update a room and add a touch of sophistication. Depending on the look you are going for, there are many different ways to modernize a brick fireplace.
Some options include painting the brick a fresh, modern color, updating the mantel to something more sleek, adding a textured wall paper behind the fireplace, and using a framed mirror to reflect light and open up the space.
Additionally, you can incorporate accessories and artwork, such as modern wall sconces, a large clock, or a bold painting above the mantel to complete the look. After selecting a modernized design, you can use a combination of products and tools to achieve the look.
You would likely need a few tools such as a drill, screwdriver, paintbrush and roller, level, measuring tape, and caulk gun to get the job done. To update the brick, you would need to use a high-quality primer, durable paint, and sealant to ensure the look lasts for years to come.
Depending on the design choice, you may also need other materials such as wallpaper, mirror, and different types of hardware for mounting the accessories. Taking the time to thoroughly clean the brick, sand and prep the surface, and apply the primer and paint will give the best results and the highest quality finish.
With careful preparation and the right materials and approach, modernizing a brick fireplace can bring a stunning transformation to any room.
What type of fireplace is most popular?
The most popular type of fireplace is the traditional open-hearth, wood-burning fireplace. These fireplaces remain a popular choice for many homeowners due to their ability to provide warmth, comfort, and the beauty of a real, roaring fire.
Open-hearth fireplaces are relatively simple to start and require nothing more than a pile of wood, kindling, and a match. With the addition of a chimney to carry away the smoke, these fireplaces can be used safely, providing a great source of heat in the winter months.
These traditional fireplaces lend a classic, timeless look to any home, as many people find them an attractive, rustic accent to their living spaces.
What is the trend for fireplaces?
Recently, the trend for fireplaces has been veering away from traditional masonry fireplaces and wood burning fireplaces, and more toward electric and gas fireplaces. Electric fireplaces, particularly wall mount electric fireplaces, are increasingly popular due to their ease of use, cleanliness, and relatively low cost.
Gas fireplaces are also popular because of the convenience of being able to turn the fireplace on and off without having to store and maintain logs. These fireplaces offer a variety of design options with an array of trim kits and frames available for customization.
Despite the increasing popularity of electric and gas fireplaces, traditional masonry fireplaces and wood burning fireplaces will always hold a special place in the hearts of homeowners due to the lasting impact and physical connection they hold to previous eras.
Should fireplace be lighter or darker than walls?
When it comes to the color of a fireplace compared to the color of the walls, there are a few things to consider. Depending on the architecture and the feel of the room, one may choose to make the fireplace stand out or blend in with the walls.
If you want the fireplace to blend in, paint it the same color as the walls. This will visually unify the entire space and create the illusion of a larger room.
If you want the fireplace to be a feature in the room, make it stand out by painting it a lighter or darker shade than the walls. Lighter colors will make the fireplace appear brighter, while darker colors will cause it to recede and appear more like a textured part of the wall.
Overall, the decision to make a fireplace lighter or darker than the walls depends on personal preference and the desired effect.
Should your mantel match your floor?
Matching the mantel to the floor is entirely a matter of personal preference. It is more important to create a cohesive look. If you have a wooden floor, you could choose to match it with a wooden mantel or even a lighter or darker shade to create contrast.
If you have a patterned floor, you may want to select a mantel of a solid color to provide balance instead of match the patterns directly. You could also play up a color used throughout the room in the mantel, or use different materials to add texture.
Ultimately, the decision should be based on your own tastes and the ambiance you wish to create in the room.
What is a good color to paint a stone fireplace?
When it comes to painting a stone fireplace, lighter shades of white, beige and grey are always a safe choice, as they allow the unique texture and characteristics of the stone to still be a prominent feature.
If you’re looking for a more colorful option, blue is an excellent choice, as it can evoke a sense of calm, especially when paired with softer shades of white or light beiges. Additionally, terracotta tones can offer an inviting atmosphere, along with warmer colors, such as yellow, which can help create a welcoming environment.
If you’re wanting to make a bolder statement, deep blue and rich green hues can act as a great backdrop for any color scheme in the space, as well as being aesthetically pleasing. No matter what color you decide to paint your stone fireplace, take your time with the process and ensure you have enough high-quality paint to cover the entire surface area.
If you follow these steps, you’ll be sure to end up with a lovely, vibrant and rich stone fireplace.
What Colour should I paint my chimney breast?
Choosing the right colour to paint your chimney breast can be difficult, as it’s such a focal point in the room. A good starting point would be picking one of the main colours in the room, whether that’s from the furniture, rug, art, or other elements, as this will ensure a cohesive look.
If the room is neutrally decorated, you could opt for a bright colour to create an eye-catching feature. For a more traditional look, a neutral earthy shade like beige would be a safe bet. If you’re feeling bold, you could opt for two colours – one for the top of the fireplace and one for the bottom.
For example, you could paint the top half a deep navy to contrast against a pale beige bottom half. This will give your chimney breast some added dimension, while still keeping it relatively subtle. Whichever colour you choose, you should always make sure it reflects your personal style and fits in with the aesthetic of the room.
What material can you put around a fireplace?
When it comes to the material you can put around a fireplace, there is a range of options. Some people prefer to go for a traditional look and may opt for brick or stone. Alternatively, you might prefer a modern look and opt for metal, drywall, wood, or tile.
Brick and stone are classic materials for a fireplace surround as they can match the existing décor of the home. Bricks that are left exposed can give a rustic vibe, while painted bricks offer something more traditional.
Stone can also be left exposed or installed and painted to match the décor or surrounding walls.
If you want to achieve a modern, minimalistic look, then metal might be the way to go. Metal can be left plain or painted, and is often combined with other materials such as brick or stone, or glass to form a focal point.
Wood panels, as well as drywall, are also popular materials used to finish a fireplace. They provide a safe option that prevents embers and sparks from escaping the fireplace. Wood can give a classic, country vibe, while painted drywall can provide a modern, sleek look.
Finally, tile is an incredibly versatile material that is often used to finish the wall around a fireplace. There are so many varieties of tile and the patterns and textures you can create are endless.
Depending on what type of tile you select, it can be used to create a traditional, modern, or even eclectic look.
Do you have to have tile around fireplace?
No, you do not have to have tile around a fireplace. Depending on the look you are trying to achieve, you might opt for other materials instead. Some common fireplace material choices include brick, stone, marble, wood, drywall, or panels.
Such as metal and glass. Ultimately, the choice of material used around a fireplace should come down to personal preference and should work with the room’s overall decoration scheme. Additionally, the material chosen will depend on the type of fireplace and the installation environment.
If you are installing a gas or electric fireplace, code requirements may also dictate your choice of material. It is always best to consult with a professional before making any decisions about your fireplace.
What is non-combustible board?
Non-combustible boards are boards made with materials that are slow to ignite and have a low rate of flame spread. They are often used for the exterior and interior walls, ceilings, floor and roof structures in residential, commercial, and industrial buildings.
The boards are composed of a variety of non-combustible materials that resist heat and fire, making them ideal for use in fire-sensitive spaces. They can be made from a variety of materials such as gypsum, fibreglass, mineral fibre, and other types of manufactured boards.
Non-combustible boards have been designed to be used in various applications and have been shown to be extremely effective in reducing fire risk in buildings. In most cases, the boards have a flame spread rate of 25 or less, and also have a low smoke-developed index and an oxygen index of 48 or higher.
The boards are also resistant to water, and can be used in areas that are exposed to moisture. Non-combustible boards are often used in home renovation projects, as they provide insulation, support, and fire resistance to a home.
They are also lightweight and easy to install, making them a popular choice for builders, homeowners, and contractors.