Skip to Content

Do all EGO batteries work with all EGO products?

No, not all EGO batteries work with all EGO products. EGO batteries are grouped into two categories: 56V Arc Lithium™ and 56V POWER+™. The 56V Arc Lithium™ batteries are found on the EGO 56V POWER+™ Mowers, Blower, and Chainsaw.

The 56V POWER+™ batteries are used for the EGO 56V POWER+™ Snow Blower, Lawn Mower, Hedge Trimmer, 15-inch or 16-inch string trimmers, and edger. Although all these products run on 56V batteries, not all of them use the same type of battery.

For example, the 56V POWER+™ Mower requires a 5.0Ah 56V Arc Lithium™ battery, and the 56V POWER+™ Snow Blower requires an 8.0Ah 56V POWER+™ Battery. Be sure to reference the user manual of the product to determine the type of battery that is required.

What battery chemistry does EGO use?

EGO uses lithium-ion and lithium-ion polymer batteries. Both are a type of rechargeable battery chemistry that offers high performance and long-term reliability. Li-ion and LiPo have become popular for use in consumer electronics such as mobile phones, laptops, and power tools.

The advantages of Li-ion and LiPo over other battery chemistries include high energy density, low self-discharge, and no maintenance. Li-ion and LiPo batteries also have longer life cycles than other chemistries, meaning they may require less frequent replacement and less frequent charging.

With EGO batteries, users benefit from technological advancements that optimize the power and runtime of each battery, so they can work with more power and last up to twice as long.

Who makes EGO chainsaw?

EGO is a company that specializes in the development of lithium-ion powered outdoor power tools, including chainsaws. The company was founded in 1993 by inventor Karl Dawson. Since then, EGO has grown to become an industry-leading innovator in the outdoor power tool arena, earning numerous awards and accolades for their commitment to developing high-quality, eco-friendly products.

One of their most popular products is the EGO Power+ chainsaw. This cordless chainsaw provides the same power and performance as a professional grade gas chainsaw, but without the hassle of dealing with messy fuel and emissions.

It utilizes a 56-volt, 5.0Ah lithium-ion battery to deliver up to 25% more power than other leading brands, and it’s capable of tackling logs up to 10” in diameter.

Does EGO make a cordless chainsaw?

Yes, EGO does make a cordless chainsaw. The EGO Power+ Chainsaw CS1401 is a cordless, electric powered chainsaw designed for both professional and consumer use. It features a 16-inch bar and chain, along with a powerful brushless motor for efficient cutting.

The brushless construction helps to provide greater efficiency than regular brushed motors, with no need for maintenance or repairs. The EGO Power+ Chainsaw can also accept attachments from other EGO Power+ products, giving it a versatile range of uses.

It also features a unique tool-free tensioning system, making it easy to adjust the chain tension while using the chainsaw. With its high IPX4 water-resistant rating, the EGO Power+ Chainsaw is built to withstand the elements and heavy-duty work.

How long does the battery last EGO chainsaw?

The battery life of an EGO chainsaw depends on the type of model and size of its battery. Most EGO chainsaw models have a 56-Volt rechargeable lithium-ion battery, equipped with an Energy Star Charger that helps optimize the charge times while maintaining the battery’s life.

On average, the battery can last up to 150 cuts or up to 30 minutes of running time, but this varies based on the type of wood being cut and the thickness being cut. The more dense the wood, the shorter the battery life.

On the other hand, if you’re cutting softer wood, then the battery will last longer than if you’re cutting harder wood. Additionally, the size of the battery will affect the battery life as well: typically, the bigger the battery size, the longer the running time and number of cuts the battery is good for.

Lastly, it is important to maintain the battery life of your EGO chainsaw. Refer to the user’s manual for tips on how to properly care for your battery so it optimally runs at its highest performance and extends its lifespan.

Does the EGO chainsaw need oil?

Yes, the EGO chainsaw does need oil in order to keep it running properly. It uses a special oil blend which is specifically designed for EGO chainsaws. To apply, remove the oil cap and fill with the correct amount and type of oil.

Close the cap, start the chainsaw and let it idle for a few seconds. Make sure to check the oil level before every use and to replenish as required.

Where are EGO products made?

EGO products are designed and engineered in North Carolina in the United States and are manufactured in a variety of locations worldwide that specialize in small engines and power equipment. This includes factories in France, China, and Taiwan.

Quality is paramount for EGO, so regardless of the country of origin, all of our products must pass rigorous in-house product testing procedures to ensure the highest levels of quality and performance.

How much does an EGO chainsaw weigh?

The EGO 56V Lithium-ion Cordless Chainsaw CS1400 weighs 10.7 pounds (4.85 kg). It features a 14-inch bar and chain and is designed for clean, fast cutting for small to medium-sized trees and logs. It has a low kickback chain and an automatic oiler that applies oil to the chain and bar as you work.

This chainsaw also has an LED indicator that lets you know when the battery is running low, so you can get your job done faster. With its variable speed trigger and soft-grip handle, you can work quickly and comfortably.

How long is the EGO pole saw?

The EGO POWER+ 8″ Pole Saw comes with a 3-piece aluminum shaft that extends to up to 10 feet when fully extended. This allows you to reach lengths up to 15 feet with an additional extension pole. The 8’ pole saw has a cutting capacity of 6” and the potent brushless motor can handle the tough conditions of tree trimming jobs.

The EGO POWER+ 8″ Pole Saw is well balanced, lightweight, and features a comfortable handle that allows you to work for extended periods of time. It also features a unique rotating mechanism that makes it easy to switch from a regular trimming position to a pole saw for those hard-to-reach branches.

The EGO POWER+ 8″ Pole Saw is a versatile tool that allows you to trim trees and shrubs safely and quickly.

How do you sharpen a chain saw?

To sharpen a chain saw, you need to make sure that it is properly lubricated, and that you have the right tools. Firstly, you will need to secure the saw’s bar and chain in a vice, just like you would secure a board, and make sure that it is very secure.

Once the saw is secure, you will then need to identify exactly where it needs to be sharpened. Look at both the depth and the angle of the cutters, and they should as even as possible. Depending on the bars design, you may need to file slightly differently, which you can identify by consulting your user manual.

Next, you need to remove any debris that has built up and clogged the guides. To do this use a stiff, and preferably angled, brush, so that you can reach harder to reach areas. You can also use compressed air to ensure that all of the dust is removed.

Once your chain saw is clear of any debris, you can then use a round file to sharpen the cutters on your chain. This should be done evenly and in the same directions. If you observe any unevenness in the cutters, or if the cutters are worn down, you can use a flat file to better guide you.

When filing the cutters, look for any nicks, or damaged spots, and work those areas to even them out.

Once all of the cutters have been sharpened, you can then set the depth guage to the correct size – usually between 1/16 and 1/8 of an inch. You can then use a flat file to adjust the depth of the guage, and also to file the tie straps in order to equalise the depth of the cutters.

Finally, after filing the cutters and setting the depth guage, you can use bar and chain oil to make sure that the chain is well lubricated. Start the chain saw, and check that it is running smoothly.

If it runs smoothly, then your task is complete.

What’s the electric chainsaw?

The electric chainsaw is a type of small, handheld power saw that is powered by electricity. It is ideal for making quick cuts through materials such as wood, plastic and metal. The saw operates using an electric motor to spin a chain around a metal guide bar that holds the cutting teeth.

The chain rotates along the bar, cutting through the material. The electric chainsaw is a popular choice for small-scale DIY projects and commercial applications that require quick, clean cuts. It is a much less bulky and noisy version of the gasoline-powered chainsaw.

Electric chainsaws tend to be lighter in weight and have the convenience of a corded plug-in power source. Thanks to their lightweight design, electric chainsaws are also much easier to handle, making them an ideal choice for those who may not have the strength or stamina to handle a heavier gasoline blade.

Is EGO brand going out of business?

No, EGO brand is not going out of business. In fact, they are still in business and doing quite well. EGO is a global power tools and outdoor power equipment brand owned by Techtronic Industries, a Hong-Kong-based company.

Since its inception in 1993, EGO has become the market leader in the outdoor power equipment industry and its products are sold in over 40 countries worldwide. The brand is renowned for its range of top quality tools and outdoor power equipment all designed to deliver professional-grade performance.

Its range of innovative products are powered by advanced, industry-leading battery technology and are available at major retail stores worldwide. Whether you need a chainsaw, trimmer, blower, edger or mower, you can be sure that EGO products exceed all expectations.

As such, EGO is not going out of business and is still actively selling its products both online and in stores.

Is EGO a Chinese company?

No, EGO is not a Chinese company. EGO is an American company based in Oregon, USA. The company was founded in 1993 by CEO Bruce Quinn and they manufacture a wide variety of lawn tools, such as lawnmowers, trimmers, edgers, and blowers.

Their lawn tools combine the latest in technology and design with high quality and performance standards. In addition to lawn care products, EGO also offers a range of power tools and accessories. The company prides itself on providing products with industry-leading innovation, ergonomic design, and commercial-grade quality and power.

What oil do you use for the EGO chainsaw?

EGO brand chainsaws recommend using a 40.2 motor oil to ensure optimal performance. When purchasing motor oil, be sure to look for a 2-cycle oil specifically formulated for air-cooled engines. Additionally, make sure the oil is marked as “TC-W3” certified, as this ensures the best lubrication and a lower burning rate that better protects your chainsaw engine.

Furthermore, the manufacturer indicates that never using petroleum-based oils can extend the working life of your machine. To properly lubricate your chainsaw, use 5.2 fl. oz. per tankful of your pre-mixed oil and fuel mixture.

Finally, it is important to discard any gasoline that has been sitting for over a month and replace it with fresh fuel mix.

Do electric chainsaws require oil?

Yes, electric chainsaws require oil. The oil helps to lubricate the engine, transmission components, and bar and chain, as well as helping to prevent corrosion. The upper and lower bar plates must be lubricated to ensure the chain runs smoothly and safely, reducing the risk of kickback.

The amount of oil to use depends on the size of the chainsaw and the type of oil there is specific recommendations for different chainsaws. Oil should be added to the chainsaw when the oil in the bar and chain oiler is low, and after every ten hours of use and after prolonged storage.

Synthetic oils are preferred for electric chainsaws because of their ability to flow freely in cold temperatures and to cling to moving parts. Different chainsaw models require different amounts, so individuals should consult their user’s manual prior to using an electric chainsaw.

How do I add oil to my electric chainsaw?

Adding oil to your electric chainsaw is an important step in keeping your chainsaw in good working order. The steps for adding oil to your electric chainsaw are as follows:

1. Begin by ensuring that your chainsaw is unplugged and cooled down. Make sure the chainsaw has not been in use for at least 10 minutes before you begin.

2. Locate the oil reservoir on the side of the machine and take off the cap.

3. If your chainsaw does not have a special oil reservoir, use a long-necked oil can to add the oil directly into the chain saw through the sprocket cover on the top of the saw.

4. Check the owner’s manual to find the appropriate type of oil to use. Many electric chainsaws require motor oil or bar and chain oil.

5. Pour the oil into the tank or sprocket cover until it reaches the fill line.

6. Secure the cap tightly once the oil tank is full.

7. Wipe up any oil that may have spilled.

It is essential to keep your electric chainsaw lubricated with the correct amount of oil for optimal performance and to prevent damage to its components. With regular maintenance, you can ensure that your electric chainsaw stays in working order for the long-term.

How often should you oil chainsaw chain?

You should oil your chainsaw chain after every use in order to keep it in working condition. To do this effectively, first check your chainsaw manual to see what type of oil your chain requires. Once you have the correct type of oil, fill the reservoir of the chain saw with the oil and allow it to run with the chain bar engaged for a few minutes to ensure that the chain is properly lubricated.

Additionally, you should regularly inspect the chain for any wear and tear and replace the chain if necessary. As a rule of thumb, if you use your chainsaw frequently or for large jobs, you will likely need to oil it more often than just after every use.