Yes, Moen kitchen faucets generally swivel. Moen produces a variety of kitchen faucets and most incorporate swivel technology as part of their design. The swivel technology allows you to move the faucet and spray head more freely for improved accessibility and convenience.
This can be especially useful when washing larger items such as stockpots, or when cleaning tricky spaces such as corners and crevices. Depending on the model, Moen faucets can pivot up to 120 degrees and some even offer up to 360 degrees of motion for more versatility.
All Moen products are carefully tested for performance and function, so you can be assured of reliability and top-notch performance with any Moen kitchen faucet.
How do I get my kitchen faucet to swivel easily?
In order to get your kitchen faucet to swivel easily, start by cleaning any residue or filters that may be preventing it from moving freely. Then, use a wrench or a pair of pliers to tighten or loosen the hex nut under the faucet to adjust the level of resistance.
You can also apply a small amount of metal-safe lubricant, such as WD-40, to the faucet’s swivel joint, which will help reduce friction and make it easier to move. Finally, if the faucet still isn’t moving the way you want it to, you may need to tighten or replace the O-ring, which holds it in place.
If you’re having trouble doing this, it’s best to consult a professional for help.
How do you fix a Moen kitchen faucet that won’t swivel?
Fixing a Moen kitchen faucet that won’t swivel is relatively easy, and can usually be done with a few simple steps.
First, turn off the water by shutting off the shut-off valves located under the sink. If the faucet has been leaking, be sure to turn the faucet ‘on’ then ‘off’ before turning off the shut-off valves, to clear any excess water.
Next, remove the faucet handle by taking off the cap on top, then unfastening any retaining screws.
Check the spout area to make sure all parts are seated correctly and the spout rotates freely. If any of the parts are loose, re-secure them by hand, taking care to not over-tighten them.
Finally, replace the faucet handle and cap. Turn the water back on and test to make sure the faucet swivels correctly.
If the above steps do not fix the issue with your Moen kitchen faucet, there may be a further issue that requires a more experienced hand. In these cases, it may be time to call a plumber to identify and if need be, replace any necessary parts.
Does a pull down faucet swivel?
Yes, a pull down faucet can swivel. Most pull down faucets have a 360 degree swivel spout that allows the user to rotate the faucet head in any direction. This ability gives more range of motion and control when using the faucet, allowing the user to direct the water flow where it’s needed.
Swivel technology has made pull down faucets even more practical and easy to use. There are models available with a greater range of swivel, such as up to 180 degrees, but this may not be necessary in all applications.
Pull down faucets with a swivel spout are an ideal choice for kitchens where multiple tasks involve the use of multiple water sources.
What is better a pull out or pull down faucet?
That depends on what type of kitchen/sink setup you have! Generally, pull out faucets are ideal for single-basin sinks because they provide greater reach and flexibility than pull down faucets. Pull down faucets, on the other hand, are great for double-basin sinks because they provide better coverage for separate areas.
Ultimately, it comes down to personal preference since both types of faucets can provide practicality and a modern look to any kitchen. It’s also worth considering whether a low-arc or a high-arc faucet is better for you, as well as possible features like water-saving technology and spray settings.
Consider all of these factors before making a decision to make sure you find the best faucet for your needs.
What is the difference between a pulldown and a pullout faucet?
The main difference between a pulldown and a pullout faucet is their design. A pulldown faucet is a single handle faucet that includes a pull down sprayer attached to the end of faucet. This means that you can use the same handle to activate the flow of water as well as the pull down sprayer.
With a pullout faucet, the faucet and the sprayer are separate, meaning there is a handle for the faucet and an additional sprayer on the side or in the back of the sink. This makes it easier to switch between different functions such as a spray, an aerated stream and a pause.
Pullouts are great for people who prefer to have more control over the water flow and pressure. They also tend to be more compact than pulldown faucets, making them ideal for smaller sinks.
What is a swivel spout?
A swivel spout is a type of fixture that is found in many kitchen and bathroom sinks. It is connected to the water supply pipe and is used to dispense water to the sink or other locations. The spout typically has an adjustable joint or pivot point which allows the spout to swivel in any direction.
This type of spout is very convenient when it comes to filling large containers or washing tasks that require a lot of maneuvering. The swivel feature also allows for more flexibility when it comes to installation.
Some swivel spouts come with a built-in aerator to help conserve water and also reduce splashing. On some models, a knurled knob can be used to adjust the water flow. Swivel spouts are usually made from brass or stainless steel and can last for many years with proper maintenance and cleaning.
Why does my Moen faucet spin all the way around?
Your Moen faucet is likely a single-handle ball-type faucet, which means a ball valve controls the water flow and temperature. The ball is held in place by a large nut and is surrounded or encased in lubricated plastic.
The faucet handle attaches to the ball and as you move the handle, pressure from the springs in the faucet and the handle move the ball. The water is allowed to flow through the ports in the ball and the angle at which it comes out is determined by where the handle is positioned.
This is why your faucet “spins all the way around” – you are actually adjusting the angle at which the water flows by rotating the handle.
Single-handle ball-type faucets are versatile and offer precise temperature adjustments, however due to their design they may also leak around the handle over time and become harder to turn. If your faucet is leaking or is getting harder to turn, you may need to repair or replace it.
How do you make a faucet handle turn the other direction?
To make a faucet handle turn the other direction, you will need to disassemble the handle and reverse the direction of the internal splines. This is a fairly simple task, and the process is outlined below.
1. First, turn off the water to the faucet.
2. Remove the decorative handle by loosening the screw at the base with a flathead screwdriver or Allen wrench.
3. Once the handle is off, you should be able to see the internal splines attached to the stem.
4. Remove the stem and the splines, and then turn them over so they are facing the opposite direction.
5. Reattach the stem and splines, making sure they are secure.
6. Replace the decorative handle, tightening the screw at the base.
7. Finally, turn on the water to the faucet and test the handle to make sure the direction is reversed.
Once the handle is reversed, you should be able to turn it in the desired direction. If you experience any issues or have any questions, it is best to consult an experienced plumbing professional for assistance.
How do I remove the cartridge from a Moen faucet?
To remove the cartridge from a Moen faucet, you will need to shut off the water supply for the faucet. Once the water supply is off, you can use an Allen wrench to remove the screw which holds the handle in place.
Next, you will need to remove the handle. Once the handle is off, you may need to use a small flat-head screwdriver to pry away the decorative trim ring from the body of the faucet. After removing the trim ring, you will be able to see the backside of the cartridge and the retaining clip that holds it in place.
To remove the cartridge, use a pair of needle-nose pliers to press down on the two tabs that are located at the sides of the retaining clip and pull the clip away from the cartridge. You should now have access to the cartridge and be able to remove it from the body.
How do I identify my Moen kitchen faucet cartridge?
Identifying your Moen kitchen faucet cartridge can be done by looking for a model or series number on the faucet itself. Models such as the Moen 1225 can often be found printed on the front of the faucet.
You can also take off the handle and unscrew the screw to remove the cap and find the exact same numbers. If, however, the handle won’t come off or the information on the faucet isn’t visible, you can locate the cartridge itself by shutting off the water supply and removing the two cartridge retaining nuts with a wrench.
Once the cartridge nut is off, the cartridge will be exposed. The number can be found on the top or side of the cartridge. Employing an online Moen Product Lookup Tool can help identify your faucet cartridge as well.
You can use the website to type in the existing parts of your faucet and the website will provide you the specifics of all parts that go with your particular model or series.
Can you take a Moen faucet apart?
Yes, it is possible to take a Moen faucet apart. Depending on the type of faucet, the process may vary a bit. Generally speaking, however, it is relatively simple to take apart a Moen faucet. To begin, you will need to make sure the water shut-off valves are off, and that the faucet handle is in the “off” position.
You can also turn off the hot and cold water supply valves if necessary.
Once this is done, you will need to locate the screws used to hold the faucet in place. Generally, these can be found under the faucet handle or escutcheon (this is the decorative piece that covers the faucet handle).
Using a Philips head screwdriver, carefully unscrew the screws, taking care not to strip or damage them. Once the screws are loose, carefully remove them from the faucet so that the handle and escutcheon can be removed.
Once the handle and escutcheon are removed, you will be able to access the inner plumbing of the faucet. At this point, you can begin to take the faucet apart. Each faucet will have different parts and pieces that can be removed, depending on the type of faucet.
However, to safely and effectively take the faucet apart, you must be familiar with the setup and its different components.
When it comes time to put the faucet back together, it is important to take your time and pay attention to the details. This will ensure that the faucet is assembled properly and works correctly.
What is Moen customer service number?
The customer service number for Moen is 1-800-289-6636. The customer service line is open from 8 a. m. to 7 p. m. EST, Monday to Friday. You can also contact Moen via email at consumer@moen. com. Additionally, you can reach out via the Moen website by submitting a contact form or live chat.
Moen also features helpful how-to videos on their website and suggests using the “Product Assistance” search bar for specific product questions.
Does Moen still have lifetime warranty?
Yes, Moen still has a lifetime warranty. Their products come with a Limited Lifetime Warranty to the original consumer purchaser, guaranteeing their products to be free of defects in material and workmanship and is generally non-transferable.
This warranty does not apply to installations; any labor costs associated with the repair or replacement of the product are not covered by this warranty. Moen’s customer service also provides free replacement parts, as well as repair service labor covered under the terms of the limited lifetime warranty.
What brand of faucet gives free replacement parts for life?
Kohler offers a lifetime of free replacement parts for all of their faucets. Their Lifetime Warranty states that all parts of their faucets and showering products are free of manufacturing defects in materials and workmanship for as long as the original consumer owns the product.
If a part ever fails due to a manufacturing defect, Kohler will replace the part free of charge, no questions asked. Kohler will even provide free parts for the repair or replacement of any defective product for the time that the original consumer owns the home.
This warranty is transferable, so if you sell your home, the coverage will last for the duration that the new homeowner owns the product.
How much does a plumber charge to replace a Moen cartridge?
The cost of replacing a Moen cartridge varies depending on the plumber and the type of cartridge needed, but it is generally between $50 and $200. The labor fees charged by the plumber will depend on the complexity of the job and their experience.
For example, basic Moen cartridge replacement jobs can cost between $50 and $100, while more complicated Moen cartridge replacements, such as replacements that require more labor or special tools may cost up to $200.
Additionally, purchasing a new Moen cartridge from the plumber may increase the cost, as plumbers sometimes charge extra for the cartridge. Ultimately, the cost for a Moen cartridge replacement job varies depending on the type of Moen cartridge needed, the complexity of the job, any additional costs for materials, the plumber’s labor costs, and the area in which you live.
Is a lifetime warranty actually a lifetime?
No, a lifetime warranty is not actually a lifetime. It is typically backed by the manufacturer’s judgement in the quality and reliability of the product, which means that the customer has a right to a repair or a replacement at the discretion of the manufacturer.
A lifetime warranty typically lasts for the normal useful life of a product and may be limited to a certain amount of years, depending on the product. This often means that coverage ends if the product is discontinued or the manufacturer goes out of business.
Additionally, some lifetime warranties are limited to the original purchaser of the product and may not be transferable.
How long should a Moen kitchen faucet last?
A Moen kitchen faucet typically lasts between five to ten years depending on the usage and maintenance given. High quality Moen faucets should last longer due to the high-grade materials used and the strict quality control they have in place.
To get the most out of your faucet regular maintenance should be done to ensure it continues operating in optimum condition. This includes wiping it down and lubricating the parts on a regular basis, as well as checking for any leaks or loose valves and parts.
With proper maintenance and care, a Moen kitchen faucet can last up to fifteen years.
