No, you do not have to use a throat plate. A throat plate is an optional accessory meant to provide extra stability when cutting long or wide pieces of material. It helps to reduce chatter or vibration by clamping the material against the table of the saw, giving a more precise and accurate cut.
The throat plate also helps protect the inner workings of the saw from dust, debris, and other foreign objects that may pass through otherwise. Although a throat plate is not required, it may be beneficial depending on the material and the type of project being undertaken.
What is the purpose of a throat plate on a table saw?
A throat plate on a table saw is a removable part, usually made out of metal, that is designed to fit within the opening of the saw table. The purpose of a throat plate is to provide a flat and even surface for the wood being cut, as well as to provide a safety barrier between the blade and the saw table.
It ensures that larger pieces do not slip down into the blade, and instead stay within the plate opening. Throat plates also allow for the adjustment of cutting depth, as the plate needs to be removed and the blade height adjusted when a different cutting depth is required.
It helps to align the blade within the opening, providing a stringer and more accurate cut. Throat plates also help to prevent chipping along the cut-end of the board, as it provides protection to the table saw during the cutting process.
Why do you need a zero clearance plate on a table saw?
A zero clearance plate on a table saw is essential to ensure your safety and make more accurate cuts. The plate acts as a barrier between the spinning blade and the table saw bench top, creating a narrow, snug opening for your cut.
This reduces the risk of pieces of wood becoming trapped in between the blade and table, which can cause serious injury or damage. Additionally, the plate ensures a more accurate cut by eliminating gaps between the blade and the table which could affect the quality and accuracy of the cut.
The plate is custom fit for each blade, creating a perfect and safe fit for any woodworking job.
Can you use an 8 inch dado blade on a 10 inch table saw?
Yes, you can use an 8 inch dado blade on a 10 inch table saw if you have the right parts. The important part to make sure you have is a dado throat plate that is compatible with your table saw. The throat plate should have a hole that is large enough for the dado blade to fit through and it should also have tabs around it that will keep the blade from wandering as it cuts.
Additionally, you may need to use a riving knife with a larger opening when using the 8 inch dado blade in order to ensure the cut is properly contained and doesn’t cause kickback. Once you have all of your parts, it is important to remember to adjust the cutting depth of the blade to the size of the workpiece you are cutting.
While 8 inch dado blades can be used on 10 inch table saws, they may not perform as well as larger, 12 inch dado blades.
What is a zero clearance cut?
A zero clearance cut is a type of cutting technique used to reduce the amount of tear-out created by a circular saw blade when carving out wood. In this technique, the blade is usually set at its maximum cutting depth, and a piece of scrap material is placed underneath the material the user intends to cut, directly below the saw blade.
This scrap material is cut along with the material above it, creating a guide that closely follows the saw blade and produces a clean, precise cut with minimal tear-out on the top material. The clean cut also reduces the chance of kickback as the blade passes through the material.
This technique can be used for a variety of different tasks, including precision cuts, trim work, and cutting out rabbets and dadoes. This technique is particularly useful for cuts that are difficult to make with a traditional saw, such as a miter saw or table saw, as the added support that the scrap material provides can help ensure that the blade never moves out of its designated cutting path.
How thick are table saw inserts?
The thickness of table saw inserts will depend on the type of insert you choose for your table saw. Generally, you can find three different kinds of inserts—zero-clearance, replaceable, and dado—which tend to range from 1/8” to 3/4” in thickness.
Zero-clearance inserts are designed so that the blade opening is just slightly wider than the blade itself, allowing for a quick, snug fit and improved accuracy when working with boards. They range in thickness from 1/8” to 3/8”.
Replaceable inserts are designed to clip in and out as needed, allowing you to easily change blade sizes. They’re usually made of plastic or phenolic material, and typically range in thickness from 1/8” to 1/2”.
Dado inserts are designed to provide support while you’re cutting dadoes, which are grooves that run the length of your board. These inserts typically come in 1/2” or 3/4” thicknesses.
So, regardless of the type of table saw insert you choose for your saw, you can expect them to range from 1/8” to 3/4” in thickness.
Can you use a table saw without a throat plate?
No, it is not recommended to use a table saw without a throat plate. A throat plate is an important part of a table saw and serves multiple purposes. The throat plate holds the saw blade in place and helps to keep it steady and level, it also helps to contain sawdust and debris from exiting out of the saw and making a mess.
Without the throat plate, there is a gap between the blade and the table top which can cause the material to slip, resulting in poor cuts and even possible kickback of the material. Additionally, without the throat plate, more sawdust and debris are likely to be released, creating more of a dust mess and potentially causing eye and lung irritation.
For these reasons, it is important to always use a throat plate with a table saw.
How do I make my throat plate clearance zero?
Making your throat plate clearance zero involves adjusting the throat plate to the correct height and ensuring that it is parallel with the knife. The throat plate should be adjusted until it is so close to the knife that when a piece of scrap wood is placed between the throat plate and the knife, a thin piece of paper can’t be inserted in the gap.
To achieve this, the throat plate should be adjusted so the outside edge runs parallel with the knife and is at the same height as the knife’s cutting edge. This is more easily done with a feeler gauge, a measuring instrument used to measure the gap between two closely spaced surfaces.
It should be adjusted until the feeler gauge reads zero, indicating that there is no gap between the plate and the knife. Once the adjustment is complete, the throat plate screws should be tightened to secure the setting.
Can Goboard get wet?
Yes, Goboard boards can get wet. However, it is best to clean them as soon as possible with a damp cloth or mild soap and water to prevent any water damage. If your Goboard is exposed to water for an extended period of time, it is important to dry it off quickly and thoroughly as soon as possible.
It is also important to ensure that all components are securely attached and water-resistant, such as the motor and battery, to avoid any electrical damage.
Is durock cancerous?
No, durock is not cancerous. Durock is a brand of cement board manufactured by USG Corporation, and it is made of a mixture of cement and reinforcing fibers, such as glass fibers or cellulose fibers, for additional strength.
This combination is non-toxic, does not contain any asbestos, and does not off-gas any volatile organic compounds (VOCs) or other harmful emissions, so it does not pose any health risks. In fact, it is often used in applications where people are regularly exposed to it, such as in bathrooms, kitchens, and other moist areas, and has been tested for both long-term indoor use and short-term outdoor use, depending on the product and its application.
Can cement board dust make you sick?
Yes, cement board dust can make you sick. The dust from cement board contains silica, a particulate that can be harmful to your lungs if inhaled in large amounts. When a person comes in contact with cement board dust, the small particles can become airborne, making it easy to inhale.
The dust may contain other substances as well, such as asbestos, that can also be harmful. When inhaled, these substances can cause coughing, sneezing, difficulty breathing asthma-like symptoms, and even lung or heart damage.
It’s important to wear an N95 mask when working with cement board dust, as this will help protect you from inhaling it. Additionally, you should make sure that any dust that is created is vacuumed and/or wiped down properly before it has a chance to spread around.
Does Hardie backer board contain asbestos?
No, Hardie backer board does not contain asbestos. Hardie backer board is a product created by James Hardie Building Products, and it is a non-asbestos fiber-cement backer board. It is made of a mix of cement, cellulose fiber, fly ash, sand, and water, plus various other ingredients.
It is designed to be used in high moisture areas like bathrooms and kitchens, as it is resistant to mold and mildew growth. Hardie backer board is durable and can handle the stresses of most home improvement projects, such as tile installation or countertop fitting.
It is an economical and safe choice for most projects.
