Yes, we do. Installing flooring is a service that we are proud to offer. Our experienced and highly trained team will ensure that your flooring is installed with the expertise and care it deserves. We use only quality materials for a durable and long-lasting result.
We also guarantee that no damage will be done to your property during the installation process. We will remove your existing flooring, prepare the surface properly, install the new materials, level the floor and finish it off with trim and transitions.
Upon installation completion, we will schedule a final inspection of your newly installed flooring to ensure that you are completely happy with the work that has been done.
Is it better to staple or nail hardwood flooring?
It really depends on the application and your preference. Nailing is considered to be more secure and sturdy than stapling, but it does create more noise and can leave a visible imprint. This method also requires a pneumatic nail gun, so it isn’t the most cost effective and may require additional tools.
Stapling is quicker, requires less equipment, and provides a cleaner looking finished product, but it may cause uneven floors and is less permanent. If using staples, make sure you use heavy duty staples with a 3/8 inch or 1/2 inch leg length.
Ultimately, it comes down to preference, budget and resources.
Do you have to nail down tongue and groove flooring?
Yes, tongue and groove flooring must be nailed down, as it is a floating floor. Nailing down tongue and groove flooring is a straightforward process, but it does require a few tools, including a hammer, nail gun, and preferably a pneumatic floor stapler.
Once you have all the necessary tools, you can begin nailing down the tongue and groove flooring. Start at the wall, and use a pneumatic floor stapler to drive the first two rows of nails into the tongue-and-groove boards.
After the first two rows are nailed down, use a nail gun to affix the first two boards of the remaining rows. To ensure they are secure, firmly press down on the seam between the boards and then hit the seam with a hammer.
Lastly, insert the grooved portion of each board into the tongue portion of the next board. This will lock them together and finish the installation. Make sure to check the boards and secure any that might have become loose during the process.
Tongue and groove flooring can add a beautiful finish to a room, and nailing it down is a straightforward process that can be done with a few basic tools. With proper installation, the floor will look great and last for many years.
Should I glue and nail hardwood floor?
Whether or not you should glue and nail hardwood flooring depends on several factors, including the type of flooring and the installation surface. Some hardwood flooring types come with tongue and groove edges, allowing them to be installed with just nails.
However, in many instances, using both nails and glues to install hardwood floors is recommended.
When you’re gluing and nailing hardwood flooring, you’re essentially creating a strong bond between the planks to ensure the floors are securely installed over time. The glue helps maintain a secure structure by forming a cohesive bond between the planks, while the nails provide vertical stability and ensure the planks won’t move around.
This is especially important when you’re installing over concrete, which can be uneven and cause the planks to warp or crack over time.
For optimal results, make sure to use an adhesive that is suitable for your flooring type. This will help the flooring bond better and create a strong wall able to withstand moisture, temperature changes, and other environmental conditions.
Ultimately, when installing hardwood flooring, using both glue and nails for optimum stability is recommended for many types of flooring.
Do I nail the tongue or groove?
The answer to this question depends largely on the type of project you are working on and the type of flooring you are using. Generally, if you’re dealing with boards that have a tongue-and-groove design, you’ll be nailing the tongue side of each board, so that the groove of the next board lines up perfectly and allows the two pieces to fit securely together.
You need to make sure that the nails don’t cause any splits or damages when they enter the wood. Make sure that you use the correct size and type of nails (i. e stainless steel, stinger) and the right amount of force when nailing the boards, to ensure that they fit securely.
Furthermore, you should use a nail gun whenever possible to make the job easier, faster and more accurate.
Can you use 18 gauge nails for hardwood floors?
No, 18 gauge nails are not suitable for hardwood floors. They are too thin and not strong enough to withstand the weight and pressure of hardwood floors. When installing hardwood floors, you should use 14 to 16 gauge nails.
The thicker nails are stronger and better able to support the weight and pressure of the hardwood flooring. It is also important to use the correct length nails for the type of hardwood flooring being installed.
If you use nails that are too long, they may protrude through the tongues of the boards, making it difficult or impossible to install the tongue-and-groove boards.
What size nails should be used for 3/4 inch hardwood flooring?
For installing 3/4 inch hardwood flooring, it is recommended to use 2-inch cleat nails. The nails should be long enough to penetrate through the subfloor and reach the floor joists beneath, which are typically 1.5 – 2.
5 inches wide. To ensure that the hardwood flooring has ample support and is properly secured to the subfloor, the nails should be driven at least 2 inches into the joists. Additionally, when driving the nails, care should be taken to avoid nail splitting, and angle the nail in slightly so it is angled against the grain and does not penetrate too far past the tongue on the floorboards.
Do you need underlayment for nail down hardwood?
Yes, you need underlayment for nail down hardwood. Underlayment provides a layer of extra cushioning and gives the floor some extra stability. It helps reduce any potential sound that may be created when people walk across the naled down hardwood, as well as providing support from below and extending the life of the floor.
It also helps level the floor and can provide extra insulation if it is a more thicker product. Additionally, using underlayment helps provide more consistent nail installation as well as making for easier removal of nails should you ever need to replace any planks.
It is always best to check with a professional before installing underlayment for your nailing down hardwood to determine the best product and installation method.
Do staples hold better than nails?
It depends on the materials and the types of staples and nails being used. Generally speaking, staples tend to be easier and faster to use for smaller jobs than nails, but nails tend to be more sturdy than staples.
Nails are better for attaching things to wood because they are stronger, but staples can be better for attaching fabric to wood. Staples will also generally hold better than nails when it comes to thinner materials, such as thin cardboard, because they won’t go through the material like a nail can.
In heavier materials, like plywood and hardwood, nails have a definite advantage in terms of strength and stability. Ultimately, it depends on factors such as the type of material, the type of staple and nail, and the job in question that will determine which is best.
How often should you staple hardwood?
Stapling hardwood flooring should be done with a special cleat nailer tool that is designed specifically for the job. Generally, it is recommended that two staples be placed at each board joint, and one staple at the end joint of each board.
Depending on the width and thickness of the hardwood flooring, it is suggested to use staples that are between 3/8-inch and 1/2-inch long. It is important to make sure the staples are firmly seated in the flooring and are not protruding above the surface so as not to create a tripping hazard.
It is also important to make sure to leave a 1/4-inch gap between each board to allow for expansion and contraction of the hardwood as needed.
Whats better flooring staples or cleats?
The answer for which type of flooring is better, staples or cleats, depends on the type of flooring and the activity. Staples are a form of hard flooring that consists of pieces of hard material such as vinyl, stone, hardwood, or tile that are held together by an adhesive or nails.
Cleats are typically made of rubber, but they can also come in metal and plastic options. They are much softer than staples and provide more cushion.
For activities that involve a lot of running, jumping, and impacts, such as basketball or soccer, cleats are the preferred choice. They provide good traction, cushioning, and protection against falls.
On the other hand, staples are more suitable for rooms that require hard surfaces, such as living rooms, kitchens, and hallways. Staples are hard-wearing and can withstand heavy use.
In conclusion, staples are better for rooms with heavy foot traffic, while cleats are better for activities that involve more activity and impacts. Ultimately, the best choice depends on the type of flooring and the activities conducted in the room.
What is the installation method for hardwood floors?
Installing hardwood floors is a popular home improvement project that can add value and beauty to a home. Depending on the type of hardwood flooring being installed, there are generally two methods of installation: glue-down and floating floor.
The glue-down method requires the use of adhesive to secure the boards to the subfloor. This method is often seen as ideal for solid hardwood flooring, engineered flooring, or parquet. It may also be the only option for some types of flooring, depending on the type and subfloor.
This method comes with a few steps:
1. Start by measuring the room and subtracting the necessary boards to allow for proper expansion.
2. Prepare the subfloor by clearing out debris, filling any holes or cracks, and cleaning with a vacuum.
3. Place two-in-one foam underlayment, which serves as a moisture barrier and adds noise reduction and cushioning.
4. Place adhesive on the back ends of the boards and lay them one at a time across the room, making sure to keep them straight and aligned.
5. Once all the boards are laid, let the adhesive dry before adding trim and transitioning pieces.
Floating hardwood floors are a great option for engineered hardwood or vinyl plank flooring, as they don’t require the use of adhesives. This method is also becoming increasingly popular for solid hardwood floors, and can be installed over existing flooring.
1. Start by measuring the room and subtracting the necessary boards to allow for expansion.
2. Prepare the subfloor by clearing debris, filling any holes or cracks, and gently cleaning with a vacuum.
3. Place felt or foam padding for noise reduction and extra cushioning.
4. Place the boards across the room in rows, leaving a space at each end for expansion.
5. Place the second row next to the first, regularly offsetting the seams of the boards to create a staggered look.
6. Connect the boards by tapping hardwood spacers between them and using wood glue to keep them in place.
7. Once all the boards are laid, you can install transition pieces and trim pieces in the same method.
No matter which method you choose, make sure to wear a dust mask, safety glasses, and gloves while doing the work. If you are not comfortable with the task, consider bringing in a professional to ensure a successful installation.
Is a floating floor better than nailed?
A floating floor is typically better than a nailed floor for many reasons. Generally speaking, floating floors are easier to install, can be more durable and resist water better, and often provide better insulation than nailed floors.
Floating floors are typically installed without the use of nails or adhesives. Instead, they are ‘floated’ on top of the subfloor or existing floor surface and held in place with interlocking tongue-and-groove boards.
This process makes installation much easier, faster, and requires fewer tools.
Floating floors are generally more durable than nailed floors. Because they are installed as individual boards with no nails or adhesives, they have the flexibility to expand and contract with changes in temperature and humidity, helping to absorb shock and minimize wear-and-tear.
In addition, they are less likely to dent or scratch than nailed floors, making them ideal for busy households with active kids and pets.
Floating floors also offer better resistance to water damage than nailed floors. This is because the lack of nails or adhesives makes them less porous, meaning they are more likely to remain intact if exposed to spills or humidity.
Lastly, floating floors are often more effective at providing insulation than nailed floors. The tongue-and-groove boards used in the installation act as a thermal bridge, keeping the floors warm in the winter and cool in the summer.
The insulation also helps reduce noise levels, making it ideal for homes where noise pollution is an issue.
Overall, floating floors offer superior performance for most applications, making them a better option than nailed floors.
Should hardwood floors be glued down?
Yes, hardwood floors should be glued down in order to provide the best possible flooring solution. The glue helps to secure the hardwood planks in place, reducing the risk of squeaking or shifting over time.
Additionally, by gluing the hardwood planks to the subfloor, it creates a more secure bond and can reduce moisture from entering the seam between the planks. This can help protect the hardwood from potential water damage or warping caused by moisture.
Furthermore, gluing the hardwood planks helps create a more seamless look throughout the flooring. Lastly, gluing the hardwood planks helps eliminate any minor imperfections that may arise from a DIY installation, including uneven gaps and misaligned planks.
What do you put on subfloor before hardwood?
When installing hardwood flooring, it is important to start with a strong base or subfloor. Subfloor is typically plywood or OSB board and should always be covered with an underlayment such as luan or rosin paper.
Underlayment provides a cushion between the subflooring and the hardwood, which reduces the amount of sound transmitted through the floor. Underlayment also helps to prevent moisture from accumulating underneath the hardwood.
Additionally, if the subflooring is particularly uneven, using an underlayment can help to even it out and make the installation process simpler.
Should you put paper under hardwood?
No, it is not generally recommended to put paper under hardwood flooring. Paper can retain moisture, which can cause mold, warping, and other issues. Additionally, when the flooring is installed, it is typically fastened or glued to the subfloor, and paper can make it difficult to properly adhere to the subfloor.
Furthermore, paper can make it difficult to sand and finish a hardwood floor in the future since it can cover up any dips, humps, or other irregularities in the floor. The best way to protect a hardwood floor is to use an underlayment designed specifically for hardwood, because it won’t retain moisture and it creates a smooth, even surface for the flooring to be installed on.