Skip to Content

Do you need a special tool for PEX clamps?

Yes, you will need a special tool for PEX clamps. This tool is known as a PEX crimper. The crimping tool is necessary in order to achieve the desired level of pressure when clamping the pipe, which ensures no leak and a secure connection.

The PEX clamps come with two parts, a clamp and a crimp ring. The crimp ring must be securely fastened to the PEX pipe to ensure a tight connection. To do this, the crimp ring must be placed over the pipe and then the PEX clamp must be secured over the crimp ring.

The crimper tool is then used to create the desired pressure on the crimp ring, which secures the connection between the PEX pipe and the PEX clamp. It is important to use the correct size of crimper tool as this ensures a secure connection and prevents leaking.

What can I use to crimp PEX?

You can use a crimp ring or a clamping tool to crimp PEX. A crimp ring is a metal ring, typically made of brass or stainless steel. You place the ring around the PEX pipe, and then use a crimping tool to squeeze the ring onto the pipe, which creates a secure seal.

Alternatively, you can use a clamping tool to clamp the fitting onto the PEX pipe. The tool has two slots, one for the PEX tubing, and one for the fitting. Then, you squeeze the tool together to secure the fitting onto the PEX tubing.

Both of these methods create a secure seal that is leak-free and provides longevity of use.

Is it better to crimp or clamp PEX?

The answer to this question depends on which application the PEX is being used for. When used for water supply lines, crimping is generally the preferred connection method because it results in a more permanent, secure connection.

When used for drain, waste, and vent applications, clamping is the preferred connection method due to its ease of installation. With clamping, the connection can usually be undone by hand, while with crimping the connection needs to be cut and a new fitting needs to be used to re-secure the connection.

Crimping may also be used for these applications if the installer requires additional security.

How do you crimp PEX fittings without a tool?

Crimping PEX fittings without a tool is possible, but not recommended. It is best to use the appropriate tools for any type of project, especially for one as important as plumbing. If you do choose to crimp the fittings without a tool, you will need the following: a hammer, something heavy, such as an adjustable wrench, and a vice.

Take the fitting and set it in the vice, making sure that the outside end of the PEX tube is held firmly. You may need to readjust the vice several times to get the proper fit. Once the tube is held in place tightly, take the hammer and tap the inside of the fitting.

This will collapse the fitting and hold it in place. Additionally, use the adjustable wrench to add a little extra pressure if necessary. The best method, however, is to invest in the proper PEX crimping tool, as they are designed to make the job much easier and secure the fittings safely.

What is better PEX crimp or sharkbite?

The answer as to whether PEX crimp or SharkBite fittings are better depends on what you are looking for and how you plan to use them.

For general usage, SharkBite fittings are usually the preferred choice due to their ease of installation. The one-step connection saves time and money when installing PEX pipe. They also eliminate the need to carry a multi-tool for crimping.

However, PEX crimp fittings are generally more reliable than SharkBite, since crimp rings and fittings must be properly sized to ensure a secure connection. In addition, PEX crimp offers better joint integrity over time because it creates a better seal with the PEX pipe.

In regards to cost, PEX crimp is generally the more affordable option, since Sharkbite fittings are often sold individually. But overall, the cost can vary depending on the type and quantity of SharkBite or crimp fittings you need.

In conclusion, the best choice between PEX crimp fittings or SharkBite depends on the project or your budget. PEX crimp fittings offer a more reliable seal, but may cost more and require more time. On the other hand, SharkBite offers a fast and easy installation, yet may not provide the best joint integrity over time.

What is the PEX connection method?

The PEX connection method is a type of plumbing system used to connect pipes in plumbing, heating, and cooling systems. It is an inexpensive and easy to use alternative to copper and other piping materials.

The PEX connection method uses a flexible tubing that is specially designed for plumbing and heating systems. The PEX connection method eliminates realigning of struggling piping, as the flexible tubing allows for quick and easy connections.

It also eliminates the need for soldering or welding, making it relatively simpler than other connection methods. This type of connection delivers maximum joint strength and flexibility for easy installation and long-term reliability.

Are plastic PEX fittings as good as brass?

While both plastic and brass PEX fittings provide adequate connections for PEX tubing, plastic fittings are generally seen as being inferior to brass. This is because plastic fittings are more vulnerable to cracking under extreme pressure and temperature changes.

In addition, because plastic fittings are not as hard and durable as brass, they can be more likely to develop leaks. Brass fittings have the benefit of being corrosion-resistant, meaning that they won’t break down or degrade over time due to contact with water or other corrosive materials.

This can provide greater reassurance that the fittings will maintain a reliable connection for years to come. Ultimately, it’s up to the user to determine which type of fitting is best for their needs and situation.

Is PEX A or B better?

The answer to which type of PEX is better, A or B, depends on the individual’s application. A PEX A tubing is designed to have better flexibility and resistance to expansion and contraction from temperature changes.

It can also be used with barb fittings and compression fittings. On the other hand, PEX B tubing has more heat resistivity and tensile strength, making it useful for more labor-intensive installation, such as in basements and below ground.

Ultimately, deciding which type of PEX tubing is better will depend on the specific application and the individual’s needs.

Are PEX clamps reusable?

Yes, PEX clamps are reusable. They are made from two pieces of plastic that are joined together with a metal clamp. The two pieces of plastic have slots that allow the clamp to be slipped into them. This makes the clamp easy to remove and reattach, allowing it to be reused many times over.

When reusing the PEX clamp, there are a few important tips to remember. Firstly, make sure all connections are secure, so that the clamp does not loosen and cause leaks. Secondly, use the same size and type of clamp when reusing, as different sizes and types can cause leaks if they do not fit properly.

Lastly, check the condition of the clamp before reusing, as any signs of wear and tear could be a sign of a potential leak.

Are all PEX crimp fittings the same?

No, not all PEX crimp fittings are the same. There are a variety of crimp fittings in terms of shape and size. The type of crimp fitting you use depends on the type of PEX tubing you are using and the application you are using it for.

PEX crimp fittings are available in a variety of shapes, sizes, and materials depending on the job. Some common types of crimp fittings include copper, brass, and stainless steel fittings. Additionally, end connections must be considered when selecting crimp fittings, as straight, elbow, and slip-on fittings are available.

When selecting crimp fittings, it is also important to make sure that the fitting’s size matches the size of the PEX tubing, as mismatched fittings may lead to leaks. Furthermore, hands-free PEX crimp tools can be used to ensure that the crimp fittings are installed correctly.

What’s better plastic or brass PEX fittings?

That really depends on your individual needs and preferences, as both have advantages and disadvantages. Plastic PEX fittings are typically less expensive, more flexible, and easier to install because they don’t require soldering.

However, they are not as durable and may crack over time when subject to higher temperatures or pressures. Brass PEX fittings are more costly, difficult to install (as they require soldering), and less flexible, but they are much more durable and are not typically affected by higher temperatures or pressures.

You should also consider the local building codes and requirements when selecting your fittings.

Can you crimp PEX twice?

Yes, you can crimp PEX tubing twice. When crimping PEX tubing, it creates a localised compression fit around the PEX fitting that helps create a watertight, secure connection.

Crimping PEX tubing twice should only be done if you’re using non-barrier PEX tubing or when you’re using a PEX crimp tool with a smaller crimp ring size than what is called for in the fitting manufacturer’s instructions.

This is because the first crimp seals the radial stiffness of the PEX while the second crimp helps to ensure that the first crimp is tight and secure. By crimping the PEX tubing twice, it creates an additional layer of security to the connection and ensures a much more dependable seal.

Do PEX crimp fittings restrict flow?

No, PEX crimp fittings do not restrict flow. PEX, or cross-linked polyethylene, is a plastic tubing material used to make durable and flexible pipes. Its construction allows for superior flexibility and superior corrosion resistance compared to traditional pipes, resulting in increased flow.

PEX crimp fittings are connecting pieces that are used to join sections of PEX pipe together. These fittings are popular because they provide a secure connection between pipes and can be installed in a fraction of the time required for traditional fixtures.

They are also much less expensive than other types of fittings. PEX crimp fittings are designed to maintain the full diameter of the pipe, which means that there is no restriction to water or gas flow.

In fact, flow studies have shown that the flow through a PEX crimp fitting is only minimally affected compared to the flow though a single piece of PEX pipe.

How long do PEX crimps last?

The longevity of PEX crimps depends on a number of different factors. Generally, PEX crimps should last a long time and be able to withstand normal wear and tear. In order for the longevity of a PEX crimp to be extended, it is important to ensure that all components are properly installed using the correct tools and instructions, and to make sure that the PEX and fittings are not compromised in any way.

Additionally, the environment that the PEX is exposed to could impact its lifespan, as extreme temperatures and other elements may cause deterioration and weaken the integrity of the crimp. With proper maintenance, the average PEX crimp should be expected to last 10-15 years or more.

How do you keep PEX from freezing in a crawl space?

If you want to keep PEX piping from freezing in a crawl space, there are a few things you can do. Firstly, insulate all pipes in the crawl space to protect them from the cold. If you use foam or fiberglass pipe insulation, make sure you tape it together tightly to ensure a complete seal.

Additionally, you should make sure that any piping near exterior walls is well insulated, as exterior walls can be a source of cold air. Another solution is to install heat trace cable, which is a special type of wiring that produces heat, on the exposed PEX piping in the crawl space.

Lastly, you should make sure you have a good vapor barrier installed on the ground to prevent air from moving freely under the home and making pipes more prone to freezing. By following these steps, you should be able to keep your PEX piping from freezing in the crawl space.

What is the way to connect PEX tubing?

The best way to connect PEX tubing is to use a crimp fitting. Crimp fittings are generally recommended for most PEX applications and require the use of a crimping tool to pinch and seal the fitting securely onto the pipe.

Begin by cutting the pipe to size, allowing 1/4″ to 1/2″ extra for expansion. Insert the fitting into the end of the pipe and pinch with the crimping tool. The crimping tool is designed to compress the fitting onto the tubing so that it creates a strong watertight connection.

When properly installed, all connections should be impermeable, saving you time and money.

Are PEX fittings interchangeable?

Yes, PEX fittings are usually interchangeable, as long as they are of the same type and size. PEX fittings come in different sizes and types, such as elbows, couplings, and adapters, so they must be the same size and type in order to be interchangeable.

PEX fittings are also typically interchangeable between brands. PEX fittings are durable and versatile, which makes them a popular choice in many applications. They can help reduce friction and pressure loss which can extend the life of the system.

PEX fittings also come in a wide variety of styles and sizes, providing flexibility for different applications.

Can you use PEX crimp rings on CTS pipe?

Yes, you can use PEX crimp rings on CTS (copper tube size) pipe. The crimp rings must be the correct size and material for the pipe, and must be crimped using the correct tool. PEX crimp rings are designed to grip the pipe tightly, providing a reliable connection with good resistance to corrosion and heat.

It is important to check that the ring is properly crimped and does not slip off the pipe when tightened. Always follow manufacturer’s instructions for proper installation.

What is the difference between Type A and Type B PEX pipe?

Type A (called PEX-A) and Type B (called PEX-B) PEX pipes are both made of a special type of polymer that offers significant advantages over traditional metal and plastic pipes. Type A and Type B pipes are manufactured using different processes, which create different end results.

Type A pipe utilizes the Engel process, which involves cross-linking molecules to create a durable, flexible composite material that resists temperature changes. Type B pipe utilizes a Silane method, which involves adding a chemical form of silicon to the base material to form a strong, temperature resistant composite material.

Type A pipe is known for its flexibility and durable nature, making it an ideal choice for tight bends and difficult installations. Type A pipe is also the better choice for cold temperatures, as it doesn’t contract or expand as much as Type B pipe when exposed to cold temperatures.

Type B pipe offers a slightly higher resistance to freeze-thaw cycles, allowing it to be used in outdoor installations that may be exposed to extreme cold or freeze-thaw cycles. Type B pipe also offers a higher allowed pressure rating and higher burst pressure ratings than Type A pipe.

Both types of PEX pipes have similar advantages and disadvantages, making it important to consider the specific application when deciding between Type A and Type B pipes. Type A PEX pipe is more flexible and easier to install in tight bends, while Type B PEX pipe has a higher pressure rating and better freeze-thaw resistance.