Skip to Content

Does Menards sell propane heaters?

Yes, Menards does sell propane heaters. They have an extensive selection of propane heaters, both indoor and outdoor, for a variety of purposes. Depending on the model and brand, the selection includes portable space heaters, vent-free wall heaters, patio heaters, and more.

Menards also sells a range of propane tank accessories such as regulators, covers, and hose connections for connecting propane tanks. Additionally, Menards offers safety items such as shut-off valves and carbon monoxide alarms, to ensure safe use of your propane heater.

Finally, Menards carries a selection of propane tanks and accessories to meet the needs of any project.

Which type of propane heater is best?

When choosing a propane heater, the best type will depend on the specific needs of the user. If you are looking to simply provide some extra warmth in a certain space, then a single-room wall-mounted heater may be the best choice.

If you need to provide heat for an entire house or larger space, then a free standing, portable heater or a forced air heater would be most appropriate. If you need to heat an outdoor area, then there are patio and garage heaters, or even fire pits available.

When selecting a propane heater, safety should be a priority and it is important to be mindful of the size of the area that you are heating, its ventilation status, energy efficiency and installation requirements.

Ultimately, the best type of propane heater will be the one that meets the specific needs of the user in terms of safety and efficiency.

Are propane heaters good for indoor use?

Propane heaters can be a good option for indoor use depending on the size of the space you are trying to heat. Smaller, portable heaters are safe for indoor use as long as they have safety features like oxygen depletion sensors, thermocouple sensors, and tip-over shut-off protection.

They are generally very efficient and can provide a quick source of heat. However, larger propane heaters are not recommended for indoor use as they can produce harmful emissions, and they should only be used in well-ventilated areas.

Additionally, all propane heaters should be used with caution and all safety precautions should be followed.

Are Propane garage heaters safe?

Propane garage heaters are generally considered safe when used correctly. To ensure safety, always read and follow the safety instructions and warnings provided with the heater. Before starting the heater, check for gas leaks by applying a soap and water solution and examine all connections for the presence of bubbles.

Check the flue pipe and the area around the heater for obstructions and make sure it is installed on a level and non-combustible surface. Install a carbon monoxide detector in the room for additional safety and when using the heater in an attached garage, it is recommended that the door is opened for ventilation.

The heater should also be monitored for signs of malfunction and regularly inspected for signs of wear and tear. Never use a propane garage heater without proper ventilation, as this can lead to carbon monoxide poisoning.

How many Btus is a big buddy heater?

A Mr. Heater Big Buddy Portable Propane Heater is rated at 18,000 BTUs. This is more than enough to heat up to 450 square feet and is ideal for use in a variety of different spaces. The Big Buddy Heater is also equipped with two swivel regulators, allowing you to use two tanks of propane simultaneously.

The Big Buddy Heater is easy to transport and also includes a decorative and protective hood. The Big Buddy Heater is also equipped with multiple features and settings, allowing you to customize your heating experience.

With the Big Buddy Heater, you’ll be able to enjoy a warm and comfortable environment no matter where you go.

How many BTUs do I need to heat my garage?

The amount of BTUs (British Thermal Units) needed to heat your garage will depend on a variety of factors, including: the overall square footage of your garage, the specific materials used in its construction, the climate of your area, and the level of insulation.

If you are using a furnace, you will also need to consider the efficiency rating of the model you choose. Generally speaking, you will need about 30 BTUs per square foot of garage space in order to adequately heat it.

For example, if you have a 400-square-foot garage, you will need approximately 12,000 BTUs. This calculation may vary depending on your specific needs. For example, if you are located in an especially cold climate or if the garage does not have adequate insulation, you may need to increase the amount of BTUs needed to heat the space.

Additionally, newer, higher efficiency furnaces may require fewer BTUs per square foot. It is important to consult a heating specialist to determine the best type and size of furnace for your needs.

What size of garage heater do I need?

When determining what size of garage heater you need, several factors should be taken into consideration. The first factor is the size of your garage. If your garage is larger than 400 square feet, you will need to purchase a larger garage heater with a heating output of 40,000 to 60,000 BTUs.

If your garage is between 200 and 400 square feet, you will need a medium-size garage heater with a heating output of 30,000 to 40,000 BTUs. Finally, if your garage is smaller than 200 square feet, a smaller heater with an output of 10,000 to 30,000 BTUs is ideal.

In addition to the size of your garage, you should also consider the insulation in your garage. If your garage has good insulation, a smaller heater should suffice. If your garage does not have good insulation, a larger heater with a higher BTU rating is recommended.

Finally, the height of your ceiling should be taken into account when selecting a heater. If your garage has a lower ceiling, a heater with a lower ceiling rating should be chosen. However, if your garage has a higher ceiling, it is recommended to choose a heater with a higher output rating.

These are some of the things to consider when selecting the size of a garage heater. It is recommended to do research and consult professionals to help determine the ideal size heater for your application.

How do you start a Mr heater on a propane heater?

To start your Mr Heater propane heater, begin by making sure the heater is connected to a propane tank. To check the connection and make sure there are no leaks, spray soapy water along the connections and around the valve.

If you notice bubbling then there is a leak and the system needs to be repaired. Then, ensure that the area around the heater is free from debris and any combustible materials. Turn on the propane tank’s regulator and wait for the fuel to begin flowing.

Turn the switch on the heater to the “On” position, and wait for the solid red light to let you know the pilot light is lit. Push and hold the pilot light button for about a minute before releasing, and you should see an orange glow.

Push the starter and hold it for roughly five to 10 seconds, ensuring you don’t release the button until the heater is running. When you are done using the heater, turn off the propane tank regulator first and then switch the heater to “Off”.

Always give the heater a couple of minutes to cool down before storing it or turning off the propane tank.

What is the price for a furnace?

The price of a furnace can vary widely depending on a few different factors. Generally, the larger the furnace (measured by BTUs or British Thermal Units) the more expensive it will be. The quality of the furnace and the brand can also have an effect on the cost.

Location also plays a factor, with installation and labor costs in high-cost of living areas tending to be higher than those in rural areas.

For a standard 80,000 BTU furnace of medium-level quality, the cost may average around $1,225 in parts and labor. A more high-end 90,000 BTU furnace may cost an average of around $1,400. If you don’t need installation and are purchasing just the furnace, your costs could be closer to $800 for a quality 80,000 BTU model.

Ultimately, the cost of a furnace depends on the size, make and model of the unit you choose and the location where you make your purchase. It’s also important to consider how much energy the furnace will save you in the long run; in some cases, the costs for a better, more efficient furnace may pay for itself in just a few years.

How much is a gas furnace for a 1200 square foot house?

The cost of a gas furnace for a 1200 square foot house depends on a variety of factors, including the type of furnace, BTU output, energy efficiency, installation costs, and the specific needs of the homeowner.

We can provide a general estimate, but costs can vary widely depending on the specifics. A basic, low-efficiency 80KBTU gas furnace with standard installation can range from $2,500 – $3,500. If you want a higher efficiency, 90%-95% AFUE gas furnace, you can expect to pay anywhere from $3,000 – $5,000, depending on the installation and other fees.

If you have the furnaces professionally serviced and periodically maintained, you can potentially extend the lifespan of the furnace, leading to even more savings in the long run.

What should I look for when buying a furnace?

When shopping for a furnace, there are several factors to consider to ensure you get the best system for your needs.

First, consider the size of the system. Furnaces come in a variety of sizes to accommodate different styles and sizes of homes. Have a professional come take measurements and figure out the right size needed to heat your home.

A system that is too small won’t be able to heat your home efficiently, while one that is too large will be more expensive to purchase and maintain.

Next, consider the energy efficiency of the system. Look for the Annual Fuel Utilization Efficiency (AFUE) rating to measure how energy-efficient the system is. The higher the AFUE rating, the more energy-efficient the furnace will be.

You should also consider the fuel source. Most furnaces run on natural gas, propane, or electricity. Each has its own advantages and disadvantages, so think about the fuel sources you have access to, as well as the efficiency of each option.

Finally, look for warranties and installation requirements. Most manufacturer’s warranties cover the purchase of the furnace, as well as installation and repairs for a certain number of years. Read through the warranty to make sure you’re fully covered and make sure the installation requirements are realistic.

Choosing a new furnace is an important decision, but by taking the time to consider these factors, you can make an informed decision that’s right for you and your home.

Can you run a furnace without a limit switch?

No, it is not recommended to run a furnace without a limit switch. The limit switch is an important safety device that is designed to monitor unsafe conditions and turn off the furnace when necessary.

It helps to protect the furnace from overheating by shutting down the burners if the temperature gets too high. The heat exchanger also relies on the limit switch to operate safely. Without a limit switch, the furnace will not cycle off in the event of an overheat condition, which can cause damage and cause the furnace to run inefficiently.

In addition, if a limit switch is not working properly, it can create an unsafe environment. Even if the furnace does cycle off, it is important that the manufacturer’s specifications for the limit switch be followed for proper operation and safe use of the furnace.

A furnace without a limit switch should not be used as it could create a serious hazard to the homeowner and other occupants.

How much is a high limit switch for a furnace?

The price of a high limit switch for a furnace depends on several factors. Firstly, the type and model of furnace you have will determine the type of high limit switch you need, as not all furnaces are compatible with the same switch.

Next, the price of the switch might depend on whether you are purchasing a standard switch or an upgrade. Finally, the cost may vary depending on the supplier you purchase it from. Therefore, an accurate cost cannot be determined without these variables being taken into consideration.

How long does a limit switch last?

The lifespan of a limit switch is largely dependent on the environment in which it is used and the quality of the switch. In ideal conditions, a high quality limit switch could last for a number of years.

However, environmental factors, such as exposure to water, dust, and other corrosive elements, can significantly reduce the lifespan. Furthermore, if the switch is used frequently and put under a lot of stress, it may only last a couple of months.

Additionally, if the switch is exposed to fluctuating temperatures, it could reduce the functional life of the switch. In general, a good quality limit switch should serve you for many years. It is always important to make sure the switch is properly installed and mounted in order to maximize its life.

What gas heater is for a garage?

It depends on what type of gas heater you need for your garage. If you’re looking for a heater to quickly and safely warm your garage, you might want to consider a gas forced air heater. These heaters use an efficient gas-powered fan to evenly distribute warm air throughout the garage.

If you are looking for a heater that is better suited to a large space, an infrared or convection-style gas heater might be a better option. These heaters use radiant heat to evenly heat the garage without having the large fan required for a forced air heater.

For even more efficient gas heat, you might want to consider a condensing gas heater. These heaters condense the exhaust from the combustion process and reuses the heat, making them more efficient than other gas heaters.

No matter what type of gas heater you choose, make sure it is installed safely and that all safety precautions are followed.

What kind of heater should I get for garage?

The type of heater you should get for your garage will depend on the size and configuration of your garage. In particular, you will want to consider the size of the space and the type of fuel you would like to use.

Generally speaking, an infrared gas heater is the ideal option for most garages. These heaters utilize natural gas or propane to produce heat quickly and efficiently, and may be better suited for larger spaces.

Electric wall-mounted heaters can provide supplemental heat for a smaller garage and are generally more economical than gas heaters. However, they require access to an electrical outlet and may take longer to heat the space appropriately.

Additionally, you may want to consider a forced air heater that circulates air throughout the space using a fan and has the option to be vented outside. Ultimately, the best choice for you will depend on your budget and how quickly you need heated air to circulate in your garage.

Will a 30000 BTU heater heat a garage?

Yes, a 30000 BTU heater will heat a garage. The size of the garage and air circulation must be considered, however. For example, if the garage is large and has poor air circulation, a higher BTU heater may be required.

The type of heater can also factor into how much heat will be generated. For example, a propane heater will provide more heat than an electric model. Ultimately, the best way to determine the appropriate BTU for a garage heater is to consult with a heating and cooling professional.

They will be able to assess the size and condition of the garage, and recommend the type and size of heater that will provide adequate heat.

How many square feet will 30000 Btu heat?

The exact number of square feet that 30000 Btu will heat can vary greatly depending on a variety of factors. For example, it may depend on the type of heating system being used, the insulation of the space, the size of the room, and the outside temperature.

As a general estimate however, it is generally said that 30000 Btu will heat approximately 1000 square feet in an insulated space of average size.

However, in order to get a more accurate idea of how much square footage 30000 Btu will heat, it is strongly recommended that an HVAC expert is consulted. An HVAC professional will be able to factor in all of the conditions of the room and space and provide a more precise estimate of how much square footage will actually be heated with 30000 Btu.