Skip to Content

Does Porter-Cable make a cordless belt sander?

If you want to sand your own wood floors, you can opt for a cordless belt sander. Porter-Cable makes several such models. They come with a dust collection bag and a vacuum. They also have a high-quality metal frame with flat edges that prevent accidents from happening.

The company was founded in 1906 and is a subsidiary of Stanley Black & Decker. The company started out making lathes but later shifted their focus to power tools. A few years later, they bought a plant on North Salina Street.

The Porter-Cable 362V belt sander has variable speed and belt control that lets you customize your sanding experience. It also has a belt tracking knob that helps control the centering of the belt while sanding.

This cordless sander is easy to use and comes with a dust bag.

If you need a belt sander for medium-duty work, you might want to consider the Porter-Cable 352VS. This 12 Amp Variable Speed Belt Sander is sturdy and is a great choice for medium-duty tasks. Its hefty size and heavy weight make it the perfect choice for professional woodworkers, but it might not be the best option for the average consumer.

What size belt does a Porter-Cable belt sander use?

Most Porter-Cable belt sanders use an abrasive belt that is 3 inches wide by 21 inches long. However, some of the newer models use a 3-inch wide by 18-inch long belt.

Why does my Porter-Cable belt sander keeps breaking belts?

First, make sure that you are using the correct type and size of belt for your sander. If the belt is too small or too big, it can put too much strain on the sander and cause the belt to break. Second, check the tracking of the belt.

If the belt is not tracking correctly, it can slip off of the pulleys and cause the belt to break. Third, make sure that the pulleys are not damaged or misaligned. If the pulleys are damaged, they can cause the belt to break.

Finally, make sure that the sanding surface is clean and free of debris. If there is debris on the sanding surface, it can cause the belt to break.

How do you change the belt sander on a Porter-Cable?

Assuming you want to know how to replace the drive belt on a Porter-Cable brand belt sander:

1. Unplug the sander from the power source.

2. Loosen the set screw in the center of the pulley with an Allen wrench.

3. Remove the old belt from the pulleys.

4. Feed the new belt over the end roller and under the middle roller.

5. Run the belt around the other pulley.

6. Pull the belt tight and re-tighten the set screw.

7. Plug in the sander and test it out.

How do you adjust the tension on a belt sander?

There are two ways to adjust the tension on a belt sander:

1. The first way is to use the tensioning knob or lever on the top of the sander. This knob or lever is used to tension the belt by putting pressure on the sanding belt.

2. The second way is to use the tracking knob or lever on the side of the sander. This knob or lever is used to adjust the position of the sanding belt on the sander.

What is a belt sander for?

A belt sander is a hand-held power tool that uses an abrasive belt to sand down wood, metal, or plastic. The belt rotates around two rollers, one of which is driven by an electric motor. The sander is moved over the surface to be sanded, and the belt abrasively removes material from the surface.

Belt sanders are generally used to remove large amounts of material quickly, and can be used for both rough sanding and finishing sanding.

How much wood can a belt sander remove?

There isn’t really a definitive answer to this question as it depends on a number of factors, such as the type and speed of the belt sander, the type of wood, and the user’s expertise. Generally speaking, a belt sander can remove a fair amount of wood quickly and easily, so it is a good tool for shaping and removing excess material.

Is a belt sander good for removing paint?

A belt sander is a power tool that is typically used to smooth out wood surfaces by sanding them down. However, a belt sander can also be used to remove paint from wood surfaces.

To use a belt sander to remove paint, you will need to attach a coarse-grit sandpaper to the sander. Once the sandpaper is in place, you can begin moving the sander over the paint-covered surface. The sandpaper will remove the paint as well as any imperfections in the wood surface.

A belt sander can be a very effective tool for removing paint from a wood surface. However, it is important to use caution when operating the sander, as it can easily damage the wood if used incorrectly.

How do you use a belt sander step by step?

Most belt sanders come with simple, straightforward instructions on how to use them. However, if you’ve never used a belt sander before, here’s a quick overview of how to do it:

1. Make sure the belt sander is properly tightened and secured before turning it on.

2. Place the sander on the surface you want to sand, and press down lightly to start.

3. Apply pressure as needed to achieve the desired results, but be careful not to apply too much pressure or sand for too long in one spot, as this can damage the surface.

4. Move the sander in a consistent, even motion to avoid leaving any uneven spots.

5. Focus on one area at a time and work your way around the entire piece until you’re satisfied with the results.

6. Once you’re finished, turn off the sander and unplug it from the power source. Clean off any debris from the surface and the sander itself, and then put it away.

What size sanding belt do I need?

The size sanding belt you need depends on the application. For example, if you are sanding a large flat surface, you will need a much larger belt than if you are sanding a small, intricate surface. So it is important to choose the right one for your project.

What is the belt size of the belt sander?

The most common belt size for a belt sander is 3″ x 21″, although there are also some 4″ x 24″ models available. The size of the belt sander is determined by the size of the belt and the width of the sanding platform.

How long should a sanding belt last?

The answer to this question depends on several factors, including the type of sanding belt, the material it is made from, the frequency of use, and the level of care taken while using it. Generally speaking, a good quality sanding belt should last anywhere from 20 to 40 hours of use.

However, if the belt is used excessively or on very abrasive surfaces, it may only last 10 to 15 hours. Conversely, if the belt is used sparingly or only on softer surfaces, it could last up to 60 hours.

Which sanding belt is best?

The type of material you are sanding, the width of the belt, the grit, and the degree of aggressiveness are all important.

Type of Material:

Some sanding belts are better suited for different materials. If you are working with wood, you will want a belt that is made specifically for wood. These belts will have a different abrasive than belts made for other materials, such as metals.

Width of the Belt:

The width of the belt will determine how much surface area you can sand at one time. If you are working with a large piece of wood, you will want a wider belt. Conversely, if you are working on a smaller project, you will want a narrower belt.

Grit:

The grit of the belt will determine how smooth the finish is. A higher grit will result in a smoother finish, while a lower grit will be more aggressive.

Degree of Aggressiveness:

Some sanding belts are more aggressive than others. If you are working with a delicate material, you will want a less aggressive belt. These belts are typically made of softer abrasives.

What size belt is GXK51?

The belt is designed to be adjustable to fit a range of waist sizes. The belt can be adjusted to fit a waist size of up to 42 inches.

What size is a KX167 sanding belt?

The size depends on the type of sander you are using, as well as the type of material you are sanding.

How do I choose a belt grinder?

The first is the speed of the grinder. A faster grinder will remove material faster but will also create more heat. If you are looking to remove large amounts of material quickly, a faster grinder is a good choice.

If you are looking for a more precise finish, a slower grinder is a better choice.

The next factor to consider is the size of the belt. A smaller belt will remove less material but will be easier to control. A larger belt will remove more material but will be more difficult to control.

The size of the belt also determines the size of the contact wheel. A larger contact wheel will provide more contact with the work piece and will remove material faster.

The last factor to consider is the type of grit on the belt. A coarser grit will remove material faster but will create more heat. A finer grit will remove material more slowly but will create less heat.

Choose a grit based on the desired finish of the work piece.

Can you sharpen knives with a belt sander?

Yes, you can sharpen knives with a belt sander. However, it is important to use the correct type of sandpaper and to secure the knife so that it does not move while you are sharpening it. It is also important to be careful not to sand too much off the blade or to create a uneven edge.

Leave a comment

Your email address will not be published.