Skip to Content

How do I adopt an UniFi AP to a new controller?

To adopt a UniFi AP to a new controller, you will need to follow these steps:

1. Log into the UniFi controller for the existing AP.

2. Go to the Settings page and click on the Adopting tab.

3. Click on the ‘Forget’ button for the AP you wish to adopt to the new controller.

4. Log into the new controller using the same credentials you used for the old controller.

5. Go to the settings page and click on the Adopting tab.

6. Click on the ‘Adopt’ button and select the AP you wish to adopt.

7. The controller will then prompt you to power cycle the AP.

8. Once the AP is powered on, it should start to associate with the new controller.

9. Once the new controller successfully associates with the AP, you should see the AP appear in the UniFi controller.

10. You can then finish the AP adoption by selecting the ‘Adopt’ button in the AP’s settings page.

11. Once the AP is adopted, you will be able to configure settings for the AP using the new controller.

How do I remove a device from UniFi controller?

Removing a device from a UniFi controller is fairly simple; here is what you will need to do. First, you should log in to your UniFi controller on your Web browser and if you are using the UniFi mobile app on your phone, log in and make sure you can view the controller.

Once you are in the controller, click on the “Devices” tab and you should be able to see a list of all the devices that are currently managed by your UniFi controller. Find the device that you want to remove and click on the “Manage” button.

This will open the device’s configuration page and from there you can select the “Forget Device” option. Select “Yes” when prompted and then click “Submit”. This will remove the device from your UniFi controller and you will no longer be able to manage it.

Be sure to save any changes that you have made before removing the device.

How do I move my AP from one UniFi to another site?

Moving your Access Point (AP) from one UniFi site to another is a relatively straightforward process that can be achieved using the UniFi Controller software.

First, log on to the UniFi Controller and select the ‘Settings’ tab. Ensure that your new site has already been set up and your first site is still connected. Select the ‘Sites’ tab, which will give you a list of all of the sites available on your Controller.

Select the first site, then click the ‘Adopt’ button below the ‘APs’ section of the overview page. This will take you to a page that shows all of the available APs on the first site. Select the ‘Adopt’ button next to the AP you wish to move.

Once you have adopted the AP from the first site, you need to move it to the new site. Select the new site from the list of sites on the UniFi Controller. On the overview page for the new site, you will find the ‘Uplink’ section – click the ‘Adopt’ button next to the AP you wish to move.

You should now be returned to the ‘Device’ overview page of the new site. The AP should appear in the list of ‘Uplink’ devices and you can click the ‘Forget’ button next to the device to remove it from the old site.

Once this is done, you can move the AP as usual (i. e. , by changing the IP address, disabling and re-enabling the radio, etc. ). You can also reset the AP to factory settings if you wish.

By following these steps, you should be able to move an AP from one UniFi site to another. It is important to remember that the new site needs to be properly configured beforehand, or you will not be able to move the AP.

How do I adopt a switch from UniFi?

The process for adopting a switch from Ubiquiti’s UniFi line can vary depending on the specific device and your desired setup. Generally, however, it involves a few simple steps:

1. Ensure that your switch is powered on and connect it to your local network via an Ethernet cable.

2. Access your UniFi controller and click the “Devices” tab, which will bring up a list of all UniFi devices that have been discovered on the network.

3. Select the switch from the list and click “Adopt” to begin the adoption process.

4. Confirm the adoption settings and wait for the device adoption to complete. This can take up to a few minutes.

5. Once the adoption process is complete, the switch will appear in the Devices tab of the controller. You can now configure it with desired settings as needed.

6. Be sure to check for any firmware updates for the switch by clicking the “Firmware” tab.

By following these steps, you should be able to easily adopt the switch and configure it according to your needs.

How do I SSH into an UniFi device?

To SSH into a UniFi device, you will need to use a SSH client, such as Putty. Once you have the SSH client installed, you will need some information about the device, such as its IP address or hostname.

Once you have this information, you can open Putty and enter the hostname or IP address into the ‘Host Name’ field. You will then need to select SSH from the Protocol field and port 22 from the ‘Port’ field.

Finally, you will need to enter a username and, if applicable, a password to log in. If all information is correct, you will be logged into the device through SSH.

Once logged into the device, you can run various commands, depending on the type of UniFi device. For example, if you are logged into a UniFi switch or access point, you can use ‘show’ commands to view device information and ‘configure’ commands to configure the device.

For more information on the commands to use with UniFi devices, refer to the appropriate product documentation available on the Ubiquiti website.

How do I access UniFi CLI?

Accessing the UniFi CLI can be done in a few different ways, depending on which version of the Unifi software you are running.

If you are running Unifi Controller version 5. x or later, the easiest way to access the CLI is via an SSH session. To begin an SSH session, first you will need to find the IP address of the UniFi device you wish to access.

Once you have the IP address, you can use an SSH client such as PuTTY to connect to the device. When prompted, enter the username and password for your device’s default user. If no default user is set, you will need to reset the device to factory defaults and create a new user.

Once you have entered the SSH session, you will be presented with the UniFi CLI prompt. You can now enter commands to perform various tasks such as changing network settings, restarting the device, or upgrading the software.

If you are running Unifi Controller version 4. x or earlier, you can access the CLI by connecting your device’s serial port to the console port of a computer. You will need the appropriate cable depending on your device’s model.

Once the serial connection is established, you can use a terminal program such as PuTTY to connect to the device. When prompted, enter the username and password for your device’s default user. If no default user is set, you will need to reset the device to factory defaults and create a new user.

Once you have connected to the device’s terminal port, you will be presented with the UniFi CLI prompt. You can now enter commands to perform various tasks such as changing network settings, restarting the device, or upgrading the software.

How many devices can connect to UniFi AP?

The number of devices that can connect to a UniFi Access Point (AP) is determined by the model of the AP and its capabilities. Generally, the higher-end models are capable of supporting more devices than the lower-end models.

For example, the UniFi AC Pro AP can provide connectivity for up to 300 devices, while the UniFi AC LR AP can provide connectivity for up to 200 devices. Furthermore, certain models are capable of providing a dual-band connection for up to 450 devices.

Additionally, UniFi APs also provide a simultaneous Dual-Band connection of up to 1300Mbps that can support many more devices with less interference and better performance. Therefore, depending on the model of the AP and its capabilities, the number of devices that can connect to it can vary significantly.

How many devices can a UniFi controller handle?

The number of devices that a UniFi controller can handle largely depends on the size and type of environment being managed. For a standard residential or small office setup, the maximum number of devices would typically be around 50, however this can be increased by adding additional access points as needed for greater capacity.

For larger environments, such as enterprise-level deployments, a UniFi controller can potentially support hundreds or even thousands of different devices. In addition, since the controller supports a variety of different device types (such as Wi-Fi access points, switches, gateways, etc.

), the specific features and capabilities of each device can have an effect on the maximum number of devices that can be managed by the controller.

Where is UniFi system properties located?

The UniFi system properties are located in the UniFi Network Controller program. The program is available on the Ubiquiti website and can be installed on Windows, macOS, and Linux computers. Once installed, the UniFi Network Controller can be used to configure the UniFi system and its associated devices.

The system properties are located in the Settings section of the controller, where you can configure the system’s general settings, wireless networks, and profiles. The System Properties window will provide you with information about the controller, the gateway, and its associated networks.

You can also change the system’s controller name, device name, firmware version, Internet connection type, and other settings.

Is UniFi cloud controller free?

UniFi Cloud Controller is not free. UniFi Cloud Controllers are a centralized management system that allows you to manage multiple access points and other connected devices. The service includes controller software that runs on dedicated hardware or as a virtual machine on a private cloud.

With this service you can perform activities such as configuring and monitoring access points, managing Wi-Fi clients, and performing remote firmware upgrades. The unified controller interface provides a convenient graphical user interface for managing multiple access points from a single point of access.

The UniFi Cloud Controller.

costs vary depending on the type of account you choose. They offer plans for both personal and business users. There are also some UniFi Cloud Controller packages that are designed for larger businesses and offer more features and capabilities.

Prices for these plans can range from $99/year to $999/year.

How much storage do I need for UniFi controller?

The amount of storage you will need for your UniFi controller depends on a few factors, such as the type of controller you have, the number of devices you plan to connect to it, as well as the features and services you plan to enable.

Generally speaking, for a basic setup, you should allot 1GB of storage for the controller itself—1.5GB is the recommended minimum. However, in the case of a more advanced setup such as a multi-site controller, you may need up to 8GB or more of storage space.

Regardless of the size of the controller, remember that it’s wise to maintain some extra storage capacity in order to ensure that you’re always able to maintain adequate performance. Additionally, it’s important to consider future growth potential—you may not need 8GB of storage right now, but it’s important to ensure that you don’t run into storage issues down the road as your network expands.

How many devices can a UDM Pro support?

The Udm Pro can support up to 30 devices simultaneously. It has a 1.7Ghz quad-core processor, 4GB RAM, and 16GB eMMC storage. This should be more than enough to handle multiple devices on your network.

Additionally, it has 16 ports for wired connections, a 2.4GHz and 5GHz dual-band radio, and MU-MIMO support. This ensures fast reliable performance for all connected devices, and it can even be expanded with a UniFi Mesh access point for even better coverage.

With the Ubiquiti Unifi controller software, you can easily manage and control all of your connected devices remotely.

What does managed by other mean on UniFi controller?

Managed by other on the UniFi controller indicates that another controller is managing the site. This could mean that another user is managing the site or simply that another controller is actively managing it.

In either case, any changes made on the original controller will not be reflected on the other controller. If the controller is not under active management, then it is considered unmanaged. This means that any changes made on the controller will be reflected on the other controller.

It is important to note that one controller can be designated as the primary controller. This means that any changes made on the primary controller will be reflected on other controllers managing the same site.

How do you adopt a device managed by other UniFi?

Adopting a device managed by other UniFi is fairly easy. First, you need to make sure that the device you are adopting is compatible with the UniFi controller you are using. Next, you need to prepare the device for adoption.

This may involve resetting the device to its factory defaults, if necessary. Finally, you need to use the UniFi controller to discover the device and initiate the adoption process.

Once the device is discovered, you may need to enter the device’s MAC address and/or the IP address into the controller. You will then confirm the adoption on the device or in the controller’s settings, depending on the type of device.

For example, some Ubiquiti-branded access points usually require you to push the button on the actual device to confirm the adoption.

Once the device has been successfully adopted, you’ll be able to control it, monitor it, and adjust its settings through the UniFi controller.

How do I factory reset my Ubiquiti?

When performing a factory reset on a Ubiquiti device, the steps may vary slightly depending on the model and firmware version of your device. However, generally the steps will be similar to the following:

1. Connect the device to your computer with an Ethernet cable, or log in to the device through SSH.

2. Log in to the device with the default credentials. For most devices, the default username is “ubnt” and the default password is “ubnt”.

3. Navigate to the “Configuration” tab.

4. Select the “Reset to Factory Default” option and confirm.

5. On some models, you will also need to hold down the reset button for 10 seconds, with the device powered on, in order to reset the device completely.

After the reset is completed, the device will need to be reconfigured in order to use it. The factory reset will erase all custom settings and configurations that you have applied to the device.

What is the UniFi OS console?

The UniFi OS console is a powerful, web-based administration console for ubiquiti networks’s UniFi platform. It is the central control plane for the UniFi system and provides comprehensive control, monitoring, and management of network devices and user devices on the network.

This console provides access to the management of access points and all the other network devices such as switches, routers, security gateways, VoIP phones, heat maps, and more, making it a great way to manage and configure your network.

The console allows you to easily configure and manage the available features, and provides real-time monitoring and statistics. It also provides for command line access for more in-depth configuration and advanced CLI commands, allowing for more advanced networking use cases.

With the increased control and visibility offered by the UniFi OS, network administrators can now better manage their network and make sure user experience is always at its best.

Where is UniFi controller config?

The UniFi controller config is typically stored in the file system of the local machine where the controller is installed. On Windows, it is typically located in the following folder:

C:\Users\\[UserName]\Ubiquiti UniFI\data\sites\\[SiteName]

However, if the controller was installed on the Cloud Key Gen2 or UDM-Pro models, the config can be found in the /usr/lib/unifi/data/sites/[SiteName] directory on the appliance’s internal storage.

Outside of the local file system, the controller config can be stored on external drives or in cloud storage solutions. This feature is available on the UniFi Network controller starting from version 5.7.

23. Steps to set up the external storage for a controller are outlined here: https://help. ubnt. com/hc/en-us/articles/115011858827-UniFi-Configure-External-Config-Files-Location.