Skip to Content

How do I clean my Wahl hair clippers?

Cleaning your Wahl hair clippers is important to ensure they remain in good working condition and reduce the spread of infection. Here are the steps to follow to clean the clippers:

1. Disconnect the clippers from the power source and turn it off.

2. Unscrew the guide combs from the bottom of the clipper and place them in a safe space.

3. With a soft cloth, clean around the blades and the blade guard.

4. Using clipper oil, lubricate the blades and blade guard.

5. Next, carefully loosen any hairs, pressed bits of skin, or other debris built up in the clipper blades using a wire brush.

6. Lastly, reattach all the guide combs and turn your clippers back on to ensure they are working properly.

It is important to ensure your clippers are regularly cleaned and checked to ensure they are working correctly and do not cause excess skin irritation. While cleaning the clippers, if you notice the blades have become blunt or have started to rust, it may be time to invest in a new set of clippers.

How do you take apart and clean Wahl clippers?

Taking apart and cleaning Wahl clippers is a simple process. First, you will want to make sure that the clippers are unplugged and turned off. Once that is done, use a small Phillips head screwdriver to remove the four screws located around the clipper head.

Once the screws have been removed, the clipper head should come off easily. If your clippers have a taper lever, remove it now.

Next, you will want to remove the clipper blades. Depending on the model of clipper, blades may need to be unscrewed or unclipped. Before removing the blades, make sure to secure them and keep track of the order in which they were removed.

After the blades have been removed, you can use a damp cloth and some mild cleaning solution — such as rubbing alcohol — to wipe down the blade housing and blade surfaces.

To clean the cutting blade itself, use a soft brush, such as a small paintbrush, to gently remove any excess hair buildup. Make sure to be thorough and particularly focus on the teeth and crevices of the blade.

When finished, use a soft cloth to dry off the blades.

Reassemble the clippers in the same order they were disassembled and all that’s left is to give them a light coating of oil. Wahl recommends using either Wahl Clini-clip Oil or another light clipper oil.

This should keep your clippers running smoothly.

How do you clean clippers without taking apart?

If you don’t want to take apart your clippers, there are a few steps you can take to get them clean without too much effort. First, you’ll need to have rubbing alcohol, a lint-free cloth, and a toothbrush or small scrub brush to reach tight areas.

Start by unplugging the clippers and carefully wiping off any hair and lint with a lint-free cloth. Make sure to wipe off the blades, housing, and the cord. Next, dip your toothbrush or scrub brush in rubbing alcohol and scrub the housing and blades until they’re completely clean.

Then, dip your lint-free cloth in the rubbing alcohol and wipe off the clipper housing and blades until they’re shiny. Lastly, let the clippers air dry before using them again.

It’s also important to regularly lubricate the blades of your clippers with light oil. This will keep them running smoothly and prevent rust. Additionally, if you have a comb attachment for your clippers, make sure to also clean and lubricate that as well.

Can you use dish soap to clean clippers?

Yes, you can use dish soap to clean clippers. To do so, first make sure to unplug the clippers from any power source and dismantle the clippers, removing the blade, blade guard and other components. Soak them in a mixture of warm water and dish soap to loosen any hair or skin particles.

Then, use a cleaning brush to scrub the blade, blade guard and other components. Lastly, rinse the components with warm water and let them dry completely before putting them back together. Additionally, it’s important to lubricate the blades after each cleaning to help keep them in proper working order.

Is it safe to clean clippers with alcohol?

Yes, it is safe to clean clippers with alcohol. You can use isopropyl or rubbing alcohol to clean your clippers. Simply apply the alcohol to a cotton swab or a soft cloth and use it to wipe down the blades and the body of the clippers.

This will help remove residue and other bacteria that can build up on the clippers over time. Additionally, you can use a soft brush, such as an old toothbrush, to help remove any debris or hair that is stuck in the blades.

Once you’ve cleaned the clippers with alcohol, rinse them with warm water and then wipe them down with a dry cloth. Additionally, you should oil the blades every few uses to ensure they are working as effectively as possible.

When done properly, cleaning clippers with alcohol is a safe and effective way to ensure they remain in good condition.

Can you clean clippers with hydrogen peroxide?

Yes, you can use hydrogen peroxide to clean clippers. Before using hydrogen peroxide, it is important to use a brush to remove any visible dirt and debris from the clippers. Once the clippers are clean, you can use a spray bottle to apply a 3% solution of hydrogen peroxide, which can help to disinfect and remove bacteria from the clippers.

You should let the hydrogen peroxide sit on the clippers for up to 10 minutes and then wipe away the solution with a clean, damp cloth. Be sure to rinse the clippers afterward, as hydrogen peroxide can damage them if left on for too long.

Then, use a dry, clean cloth to buff the clippers. Finally, use a lightweight oil to lubricate the blades of the clippers and reinstall them back in their housing.

What happens if you don’t oil your clippers?

If you do not oil your clippers, they will not function as effectively and may start to become rusty due to oxidation. The blades will become dull over time and will be unable to cut the hair properly.

Additionally, without regular oiling, the blades may become stuck or jammed due to accumulated dirt and hair, making them difficult or impossible to use. This can be extremely frustrating and may lead you to having to purchase a new pair of clippers.

If you oil your clippers regularly, this should not be a problem as the oil provides lubrication and acts as a protective barrier against rust and dirt. Additionally, it will help the blades move smoothly and make for a cleaner, more precise cut.

What kind of oil does Wahl clippers use?

Wahl clippers use a combination of high grade mineral oil and clipper oil to maintain their clippers and keep them running smoothly. The mineral oil lubricates, cleans, and cools the blades and components of the clipper, while the clipper oil coats the blades and prevents rust and corrosion.

This combination helps the blades of the clipper stay sharp and operating efficiently. Wahl recommends regularly cleaning and lightly oiling the blades and drive system with the clipper oil to ensure the clipper operates at its highest levels of performance.

How long does Clipper oil last?

Clipper oil generally lasts for about six months, depending on how it is used and stored. The shelf life of clipper oil can vary, however, based on the viscosity and the type of oil. If the oil is kept in a cool, dry place and not exposed to sun, moisture or extreme temperatures, then it will last for six months or longer.

It is important to regularly check the oil for discoloration, which is an indication that the oil has degraded, and to replace it if necessary. Additionally, excessive heat from clipper blades can also cause the oil to break down and become less effective, so it is important to regularly oil the blades and allow them to cool before each use.

Clipping oil should smell faintly of mineral spirits and not have any discoloring or any lumps or solids when it is in good condition.