To connect a Merkury plug, you’ll first need to install the Merkury app on your smartphone. Next, plug your Merkury plug into a power outlet. After the outlet is powered on, press and hold the power button for about three seconds until the LED light begins to blink.
Go to your phone’s Bluetooth settings and select the Merkury Plug from the list. This should allow your plug to pair with your phone. Finally, open the Merkury app on your phone and follow the instructions to finish setting up your Merkury plug.
Once setup is complete, use the Merkury app to configure your plug and control any device plugged into it.
How do you use a merkury outlet?
Using a Merkury outlet is quite straightforward. First, you will need to locate the correct outlet into which you intend to plug the Merkury device. When plugging in the Merkury device, make sure that it is oriented correctly and that the prongs fit snugly into the outlet.
If the outlet has a switch, make sure to switch it to the “On” position.
Now that the Merkury device is in the outlet, you will need to connect any necessary cables. This could include an Ethernet cable to connect the device to the Internet or an optional cable to an external device such as speakers.
Once all cables have been connected, you will need to turn the Merkury device on. You can do this either by using the power button on the device or using the remote control.
Once the device is on, you can begin to use it to control compatible devices like lights, locks, and connected appliances. This can be done through the Merkury app on your mobile device or by using voice commands through a compatible virtual assistant such as Alexa or Google Assistant.
Make sure to read the device’s user manual before getting started to make sure that you are getting the most out of your Merkury device.
What app is use for merkury smart plug?
The Merkury Smart Plug app is the official app used to control and manage Merkury smart plugs. The app is available for iOS and Android devices and can be downloaded from the App Store or Google Play.
The Merkury app gives users the ability to control their plugs from anywhere with an internet connection, allowing users to turn appliances on or off remotely. Additionally, users can set schedules and automate their plugs, giving them the flexibility to control multiple plugs at once.
It also allows users to monitor real-time energy usage and set energy budget alerts, so they can make informed decisions to reduce energy overall costs.
Why is my Geeni plug not connecting?
There could be several factors that could be causing your Geeni plug to not connect. It’s important to check that your router is set up correctly and your device is within approximately 30 feet of the router.
You should also try toggling the power off and on to reset the connection. In addition, check the app to make sure the connection is active. Lastly, be sure the plug is correctly and securely inserted into the outlet.
If all of these troubleshooting steps have been performed and the plug still cannot connect, you may have to reset the device and repeater manually. To do this, hold the button on the plug for 8 seconds until the LED light turns solid red, then press it twice to access the setup.
If you continue to have difficulty with connection, please contact Geeni’s customer service for additional help.
How do I get my Geeni plug back online?
In order to get your Geeni plug back online, you will first need to ensure that the plug is properly connected to your Wi-Fi network. If the plug is not already connected to your Wi-Fi network, you will need to follow the instructions in the user manual for setting up the plug with your Wi-Fi.
Once the plug is connected to your Wi-Fi, the next step is to download the Geeni app and sign in with your account. Once you have signed in, you will need to add the Geeni plug to the app by selecting the “Add New Device” option, select the plug and follow the on-screen instructions to add the plug to your account.
If the plug is already connected to your Wi-Fi network and has been previously added to the Geeni app, the plug may have lost connection due to an unstable signal or a firmware update. To get the plug back online, try the following:
• Ensure the plug is within the range of your router.
• Reset the plug by holding down the power button for 7 seconds.
• Try unplugging the Geeni plug and plugging it back in.
• Try turning the Wi-Fi router off and on again.
• Try restarting the Geeni app.
If none of the above steps work, you may need to reinstall the Geeni app and start from scratch.
How do I add a device to my Geeni?
To add a device to your Geeni, first make sure that your Geeni device is installed and powered on. Next, download the Geeni app from the App Store or Google Play and sign in to the app. Then, proceed with the setup process following the on-screen instructions.
Once the setup process is complete, you can select the “+” button in the top right corner of the app and add the desired device to your account. The app will search for new devices in your network, and present you with a list of available devices.
You can simply select the desired device from the list and follow the on-screen instructions to add it to your account.
Once the device is added, you will be able to control and manage it from the app. You can also group it with other similar devices for easier control. Finally, you can create and manage automations for each device via the Automation tab.
With the Geeni app, you can add as many compatible devices as you like to your network – allowing you to take control of all of your devices with a single app.
Where is the reset button on Geeni?
The reset button on Geeni is located on the base of the Geeni device. To reset the device, press and hold the reset button for around 10 seconds or until the LED light starts to blink rapidly. The device will then reset itself and you can reconnect it to your network.
You can also reset your device from the Geeni app. To do this, go to the Geeni app and select the device you want to reset from the devices list. Then press the reset icon located on the top right corner.
The device will then reset itself and you can reconnect it to your network.
Why is my Geeni flashing blue?
If your Geeni device is flashing blue, it is likely trying to connect to your Wi-Fi network. Check the Geeni app to make sure the device is online and connected. If this is not the case, try following these steps:
1. Make sure the Wi-Fi network being connected to is the same one you used to install the Geeni app and device
2. Launch the Geeni app and select “Devices”
3. Select “Add Device”
4. Choose your device type and select “Next”
5. Select your home Wi-Fi network on the list
6. If a Password is required, enter the correct password
7. After the connection is successful, click “Done”.
If your Geeni device is still flashing blue and not connecting, you may need to reset it. You can reset the device by pressing and holding the reset button for 8 seconds. This will erase all settings and erase any Wi-Fi connections.
After you have reset your Geeni device, follow the previous steps to set up your Geeni device.
Why is Geeni not working with Google home?
There could be several reasons why Geeni is not working with Google Home. The most common reasons could be related to Wi-Fi connectivity, account authorization, wrong voice command, or device compatibility.
Firstly, check that your Geeni device is properly connected to the same Wi-Fi network as your Google Home device. You should also make sure that both devices have the latest firmware and software updates.
Secondly, make sure the Geeni account is connected and authorized to the same Google Home or Google Assistant account being used. You can do that easily by going to Google Home app > Menu > Home Control > tap the “+” > type “Geeni” and follow the instructions to link your Geeni account to the Google Home account.
Thirdly, check if the voice commands used to control Geeni are correct. For example, if you want to turn on the lights, you might say “Hey Google, turn on the lights”.
Finally, make sure the Geeni device is compatible with Google Home. You should check the device’s specs as sometimes devices aren’t compatible with Google Home.
Does merkury plugs work with Alexa?
Yes, Merkury plugs do work with Alexa. The Merkury Smart Wi-Fi Plug Mini is a Wi-Fi enabled smart plug that allows you to control your appliances and lights from anywhere with your Alexa app or voice control.
It is compatible with any existing devices that use a 2.4GHz Wi-Fi connection, and you can control up to 10 plugs from your Alexa app. Alexa will respond to voice commands such as turning on or off devices, dimming lights, scheduling timers, and setting scenes.
The plug is also compatible with Google Assistant, IFTTT and Nest, so that you can use it even more easily.
Why can’t Alexa find my smart plug?
There could be a few reasons why Alexa is not finding your smart plug. First, make sure the plug is properly connected to the power outlet and that the power is turned on to the plug. If the plug is on and still Alexa isn’t recognizing it, then it could be that your Alexa app needs to be updated to the latest version.
Lastly, double check the Alexa devices in your app to make sure that the plug is connected to the correct Wi-Fi network. If it is and it’s still not working, then try resetting the plug and adding it to your Alexa app again.
If none of these steps work, then it could be a technical issue with the smart plug itself or with the way it’s connected to your Wi-Fi network. If that’s the case, then you may need to reach out to the plug’s manufacturer for assistance.
What is a smart plug and how does it work?
A smart plug is a device that allows you to control your household appliances and electronics from your phone or other digital device. They connect to your home Wi-Fi network and can be connected to your smartphone through an app or a web-based interface.
Smart plugs allow you to turn your devices on or off, adjust their settings and even monitor their energy consumption from anywhere you have an internet connection.
You simply plug the device into your wall outlet and then plug the appliance or electronics you want to control into the device. Smart plugs feature a variety of safety measures such as an overload protection and over current protection options.
Some even feature voice control through devices such as Amazon Alexa or Google Home. You can then link the plug to the app on your phone or other device and control your appliances and electronics through a virtual switch.
Most plugs are compatible with both Android and iOS devices so you can control your home’s energy use from any device.
Smart plugs are an ideal way to monitor energy usage around your home and to save money on your bills by turning off devices when they are not being used. They are also useful for keeping your home safe as you can access your plugs remotely and can turn appliances off in the event that you left an iron or something else running while away from home.
Smart plugs offer automated control of many devices, from lights to coffee makers, and can help make life simpler and more convenient.