Converting mini blinds to roman shades is a relatively simple project that can be done with a few basic tools. You will need a drill or screwdriver, a utility knife, scissors, fabric of your choice, a sewing needle and thread, and two tension rods.
First, remove the mini blinds from the window. Unscrew the brackets from the wall and carefully remove the mini blinds from the window. It’s best to clean the window once the mini blinds have been removed.
Next, measure the window and add an additional 2-4 inches to the dimensions to allow enough fabric for the roman shades. Cut the fabric to the appropriate size and fold it in half lengthwise. Find the exact center of the folded fabric and mark it with a straight edge and pin.
Using the sewing needle and thread, stitch down the length of the fabric from the top of the fold to the bottom of the fold, creating two panels. Create the “shirring” of the roman shade by gathering the two panels together in the center and folding them onto one another.
Secure the gathers at the center of the roman shade with a few stitches.
Now, attach the tension rods to the top part of the roman shade. Measure the width of the window and cut the tension rods appropriately. Drill or screw in the tension rods into the window frame at the point of desired tension.
Make sure the brackets are secure and attach the tension rods to the top of the roman shade – one rod at each side.
Finally, hang the roman shade onto the tension rods. Insert the bottom of the roman shade into the clip of the tension rods and adjust the tension as needed. Test out the roman shade to make sure it is hung properly and operates smoothly.
And you’re done! With a few simple steps, you’ve successfully converted your mini blinds to roman shades.
How do you attach fabric to mini blinds?
Attaching fabric to mini blinds is a straightforward process. First, take measurements of the blinds to determine how much fabric you need and trim the fabric to size. Next, cut the fabric down the middle lengthwise to create two pieces.
After laying the blinds on a flat surface, cover one side of the blinds with a piece of fabric, allowing the excess fabric to hang over the edges of the blinds. Secure the fabric to the top and bottom of the blinds using fabric tape.
Once the fabric is attached to one side, repeat the same process for the other side. Make sure to leave the pull cord intact. Finally, trim off any excess fabric and use velcro, tape, or a stapler to keep the fabric from interfering with the pull cord.
How do you make a simple Roman shade?
Making a simple Roman shade is a relatively easy process and a great way to add a stylish and modern touch to any window. Here is a step-by-step tutorial on how to make a basic Roman shade:
Step 1: Determine the size of your window and buy the corresponding fabric and lining.
Step 2: Begin by cutting the width of your fabric to the size of your window, plus 3-4 extra inches for a hem.
Step 3: Iron a 1-inch hem along the top and bottom of the fabric and stitch it down for reinforcement.
Step 4: Measure the length of the fabric and cut the lining accordingly. Hem the sides with a 1-inch hem and stitch them down.
Step 5: Sew the lining to the back of the fabric and to the edge of the top and bottom hems.
Step 6: Make sure that the hem on the top of the fabric is double the width of the hem on the bottom. Fold the bottom hem up and tuck it into the top hem. This will be where the Roman shade will gather.
Step 7: Sew a line of double folded bias tape along the backside of the top hem. Sew a cord onto the bias tape and thread it through the hem.
Step 8: Install the Roman shade by mounting two brackets on either side of the window frame. Thread the pull cord through the mounting plate and through the gathered hem of the fabric.
And that’s it! You have now successfully made a simple Roman shade.
Can you use roman shades with blinds?
Yes, you can absolutely use roman shades with blinds. Roman shades are a popular choice to pair with blinds, since they provide additional texture, color, and style to a room. Depending on the style, roman shades can offer a more elegant, decorative look like the iconic “bamboo” shades, or the sleek modern look of fabric.
They can give a layered effect, so you can still get the great light and privacy benefits from the blinds, while still enjoy the look and texture of the roman shades. What’s more, both roman shades and blinds come in numerous styles, fabrics, designs, and colors, so it’s easy to customize the look of your space.
How do you make Roman shades without a dowel?
Making Roman shades without a dowel is possible! To begin, figure out the size of the space you are working with. Consider what type of window you are dressing and take measurements of the width, length, and depth.
Once you have this information, you can choose the type of material you would like your Roman shades to be made out of. The best options for shades without a dowel include lightweight fabrics and those with qualities like blackout lining.
Next, you will need to create the panels of fabric that will create your Roman shades. Begin by cutting the fabric you’ve chosen to the appropriate measurements. If you are making full-length shades, you will want two strips of fabric that reach from the top of the window to the bottom.
If you are making shorter shades, you will want to create four strips of fabric. Leave a few extra inches on the top and bottom for hemming.
Now it’s time to hem each panel of fabric. You will want to sew a small, neat hem along the top and bottom of each panel. This will prevent fraying and keep the panels from moving around.
Once you have hemmed the panels, you can begin to assemble the Roman shades. Start by laying down the first panel and then overlapping the next panel on top of it to create a stack of panels. As you continue this process, use snippets of ribbon, string, or twine to tie the panels together at various intervals.
This will ensure your shades hold their shape.
Once all the panels are secured, you can hang your Roman shades. Measure the length of twine or ribbon required and mark the desired locations on the wall. Securely fasten the twine or ribbon in place and hang the Roman shades.
Making Roman shades without a dowel is a simple and budget-friendly process with great results. With a few supplies, measurements, and a bit of time and effort, you can easily create beautiful custom Roman shades for your space.
What is the difference between Roman blinds and Roman shades?
Roman blinds and Roman shades are two very similar window treatment options, but they have key differences that can help you decide which is best for your home. Roman blinds are typically made of fabric or material that hangs in fixed pleats or folds and is raised and lowered by a cord through a pulley system.
The folds of the Roman blind make the fabric billow when it is lowered, giving it a soft and luxurious look. Roman shades are made entirely of fabric, typically with a stiffener at the back. Roman shades hang in even pleats while raised, which gives them a tailored look.
Roman shades are typically operated by a cord system similar to Roman blinds, although many roman shades are also available with specialty systems, including motorization. Roman shades also tend to have several fabric options available compared to Roman blinds, offering more versatility.
What kind of fabric is for Roman shades?
Roman shades are a popular style of window treatment that offer a combination of beauty, privacy and light filtering all in one package. Roman shades can be made from a variety of fabrics, including natural fibers like linen, cotton, and silk, or synthetic fabrics like polyester and nylon.
Many homeowners opt for materials that have a soft hand feel and textured, luxurious look. Colors and patterns range from bold and vibrant to subtle and calming. Light-filtering fabric allows some natural light to enter the space while maintaining privacy, while blackout fabrics completely block any incoming sunlight.
Additionally, some fabrics offer sun protection or they can come with a coating to impart a flame-resistant quality, providing an extra layer of safety to the home.
How do you cover horizontal blinds with fabric?
Covering horizontal blinds with fabric can be done easily with a few simple steps.
First, you will need to measure the width and length of the blinds to ensure you purchase enough fabric to complete the job. Cut out pieces of fabric to the desired size based on your measurements, making sure to add a few extra inches to the length for a nice, wide overlap.
Place the pieces of fabric on a flat surface and ensure that they are lined up properly.
Next, place the blinds on top of the fabric and make sure they are centered. Secure the fabric to the blinds using fabric glue, taking extra care to make sure there are no wrinkles or excess fabric. If the horizontal blinds have cords on them, make sure you don’t glue over the cords.
Once the fabric is secure, trim off any extra fabric and use a hot glue gun to make sure all the edges are tucked in nicely for a neat finish.
Finally, hang your blinds back up and admire your handiwork! You can add a decorative hem around the edges of the fabric if you’d like to add an extra level of detail to your project. Covering horizontal blinds with fabric is an easy and cost-effective way to add a unique touch to your windows!.
How do cordless Roman shades work?
Cordless Roman shades are an efficient, stylish and very safe way to add a beautiful window covering to any room. These shades operate much like traditional corded Roman shades, but with some important differences.
Instead of cords, cordless Roman shades use hidden mechanized rods, often located at the back of the shade near the top. When you want to raise or lower the shade, you simply pull the bottom rail up or down, the mechanized rod hidden at the back of the shade projecting inward or outward depending on the direction of travel.
This raises or lowers the shade itself. When the desired position is achieved, release the bottom rail and allow the shade to stay at the same position. The result is a very smooth, consistent look across the window.
The absence of cords also makes them much safer for smaller children or pets, eliminating any risk of getting tangled in strings or cords.
Can you mix blinds and roman shades?
Yes, you can mix blinds and roman shades. Roman shades provide a beautiful look to any room and offer both style and functionality. Adding blinds, especially horizontal ones, to the mix will add depth and a unique look to the space.
The two can be seamlessly blended together or placed in alternating spaces, depending on the look you want to achieve. If you decide to blend them, choose a coordinating color and fabric for each, and alternate the textures, slat sizes, or even materials for an eclectic look.
Be sure that the fabric colors coordinate with the colors of the walls, furniture, and other decor for a beautiful, cohesive appearance.
Can you put Roman blinds over roller blinds?
Yes, it is possible to put roman blinds over roller blinds. Roman blinds are beautiful, custom window treatments that provide privacy, block out light, and control sun glare. Roman blinds can be hung in a variety of ways, either used as standalone or layered over other window treatments such as roller blinds.
Adding roman blinds as an additional layer to your window treatment can add a decorative touch of fabric and texture to your existing window treatment. When layering correctly, the combination of roman blinds and roller blinds can work with a variety of window types, from large picture windows to more standard sizes, and can enhance the look of any room.
Consider adding roman blinds to your roller blinds for a refreshing new look for your home.
Which is better roman or roller blinds?
The answer to which is better, Roman or Roller Blinds, is largely subjective and depends on what type of look and function are desired. Roman blinds are composed of flat fabric panels that fold up accordion-style when opened.
They generally provide a more tailored, elegant look and have options for blackout liners. Roller blinds are composed of a single piece of fabric that rolls up or down. They are great for practicality, easy to operate and offer flexibility when it comes to decorating small windows.
They also come in a broader range of fabrics, colors and textures. Ultimately, it depends on individual preference and the style of the room.
Are Roman blinds still in fashion?
Yes, Roman blinds are still very much in fashion today! They are a timeless window treatment option that has been around for centuries and continues to be a very popular choice for many homeowners. Roman blinds can be made with a variety of fabrics and colors, so it’s easy to customize them to fit any decor style.
They also provide excellent light control and privacy, perfect for bedrooms and living rooms. Roman blinds also look great when layered with other window treatments such as drapes, sheers, or valances.
You can even pair them up with shades or shutters for added style and functionality. Roman blinds are a great way to bring a timeless, stylish look to any room.
Are Roman shades more expensive than roller shades?
The overall cost of Roman shades and roller shades may depend on the type of material, size, and design you choose. Generally, Roman shades are more expensive than roller shades. However, the cost differ based on the unique features, such as thermal insulation, ease of use, and colour variety.
For example, Roman shades often feature cordless or motorized operation as well as luxurious fabrics which contribute additional cost to the shades. In comparison, you can get a basic roller shade with no extra features for a lower price.
In addition, Roman shades come with a large variety of options, such as different folds and shapes that contribute to the higher price. Furthermore, higher fabric varieties and control upgrades, operate through voice commands and app control, will also increase the cost.
If you are looking for a more affordable option, roller shades are usually a better option as they are usually less expensive than Roman shades.
Why are Roman blinds so expensive?
Roman blinds are a great way to add a classic feel to a room, but they can also be expensive. First, they require more fabric and material than other blinds such as roller or venetian blinds. This is because they are made of stiffer materials and the folds need to be precisely folded in order to achieve the desired look.
Additionally, there is often a lot of handwork and sewing involved in order for the blinds to be hung correctly and look great. This takes time and labor, also increasing the cost. Furthermore, depending on the size and style of the blinds, the hardware used to hang them can be expensive.
Combined, all of these factors can add up to a higher price tag than other types of blinds.
Are Roman blinds a good idea?
Yes, Roman blinds are a great idea for your home. These blinds are stylish, elegant, and extremely versatile. They can be used to blur the line between true window treatments and interior design elements, while also offering excellent light control.
Homeowners can easily adjust the height of a Roman blind by pulling or releasing a cord or a wand. The blinds can be opened to let in light and to give a room a soft, open feel, or closed for complete privacy.
Roman blinds come in a wide variety of fabrics, so you can choose a color and material that fits any design scheme. Plus, these blinds can be cleaned with a dust cloth or vacuum for easy maintenance.
All in all, Roman blinds are a great choice for any home.
How many yards of fabric do I need for a faux Roman shade?
The amount of fabric you need for a faux Roman shade will depend on the width and length of your window. Generally, the fabric you’ll need should be three to four times the width of the window. So if your window is 24 inches wide, you’ll need fabric approximately 72 inches to 96 inches wide.
As for length, if you’re making a flat Roman shade or a relaxed Roman shade, the fabric should be at least 8 to 10 inches longer than your window (if the shade will hang from the same height of the window on each side).
If your shade will hang from different heights, you’ll need to adjust the measurements accordingly. So if your window is 24 inches wide and 60 inches long, you’ll need to purchase fabric that’s at least 96 inches wide and 68 – 70 inches long.
The amount of fabric will also depend on the style you’re going for. If you need extra fabric for pleats, a hem, or a valance, you should purchase more fabric than the measurements given here.
How many folds should a faux Roman shade have?
Typically, faux Roman shades should have four, five or six folds. The look of the shade will depend heavily on the number of folds that you choose. For instance, four folds will give the shade a somewhat boxy look, while five or six folds will produce a more full and luxurious look.
If you would like a more dramatic look for your faux Roman shade, seven or eight folds are also an option. In general, the more folds your shade has, the more intricate it will appear. Ultimately, the number of folds that you choose should be based on your personal preference and the look that you’re trying to achieve.
