Skip to Content

How do I measure for inside mount blinds?

Measuring for inside mount blinds is relatively straightforward, but it does require accurate measurements. You need to measure the inside width and height of your window in at least three different places: the top, the middle, and the bottom.

It is best to use a metal measuring tape and record the smallest of these three measurements. These measurements are the figure that you need to order blinds with. Additionally, you should always take into account the amount of depth needed to install the blinds.

Make sure to measure the depth of the window frame, as well as the distance from the window trim to the interior window casing. This measurement should also be factored into your decision when ordering inside mount blinds.

How are cordless blinds measured?

Cordless blinds should be measured before ordering to ensure they fit correctly. Different styles of blinds need to be measured in different ways. For instance, if you are choosing Roman cordless shades, then measure from the top of the window to just below the window sill.

Additionally, you will need to measure the overall window width. To do this, measure the width of the window from inside the frame at the top, middle, and bottom and then use the narrowest measurement.

If you are purchasing cordless venetian blinds, measure the inside width of the window in 3 places and then take the narrowest measurement. Venetians should overlap the window frame by around 20mm in order to ensure that there is no gap when they are closed.

The height should also be measured and venetians should overlap slightly at the top of the window, typically 25mm-50mm.

Finally, if you are ordering cordless roller shades, measure the width of the window in 3 places and then take the widest measurement. The overall height should be measured starting from the top of the window, down to where you would like the bottom of the blind to sit.

Measuring for cordless blinds is important in order to ensure that you get a perfect fit. Taking the correct measurements and ordering the correct size blinds will ensure your blinds will be both aesthetically pleasing and secure.

How do you install cordless blinds inside Mount?

Installing cordless blinds inside mount requires a few steps, but it is relatively easy and hassle-free. Most cords have pre-drilled holes for mounting, so you’ll need to measure to ensure the holes line up with the anchors and your window frame.

After that, you’ll need to ensure the blinds are level.

Begin by using a level, measuring tape, and a pencil to measure the top, bottom, and sides of the window. Start by placing the mounting brackets near the window casing, roughly six inches from the top, and check that the frame is level.

Next, place the head rail of the cordless blinds into the mounting bracket, making sure it is level, and mark with a pencil where the holes line up with the anchors. Using a drill, attach the mounting screws and secure the brackets in place.

Once the mounting brackets are in place, lift the head rail and place it onto the mounting brackets. Make sure to raise the bottom rail to the top before lowering the head rail back down. This will help ensure proper functioning of the cords.

Secure the head rail with the included screws and then test the blinds to make sure they open and close smoothly and securely. Once you have confirmed that the new cordless blinds are operating properly, you can enjoy having them in your home!.

What size blinds do I need for a 35 inch window?

You will need to measure your window to ensure that you get the right size blinds for your 35 inch window. Generally, you would want the width of your blinds to be slightly larger than the width of the window so that the blinds will have complete coverage and overlap the sides of the window.

A 35 inch window should have blinds with a width between 35 and 36 inches to ensure the right fit. To determine the exact size of your blinds, measure the exact width of the window in three different places: at the top, in the middle, and at the bottom.

Use the smallest measurement, as this will be the size of your blinds.

Where should inside mount blinds be placed?

When selecting the location for an inside mount, it is important to understand that inside mount blinds and shades need to be placed within the window opening. This means they should be placed within the frame of the window, not extending over the edge of the frame or outside the frame.

It is best to take measurements that are 1/4 of an inch less than the actual window opening on each side, this will ensure a tight fit when the product is installed. If measurements are taken outside the window opening, the blinds and shades will be too large and may not fit properly.

Inside mounts should also be placed at least 1/2 of an inch above the window sill to avoid interfering with the window. For windows that open from the top and have a moveable upper sash, it is important to consider and measure the location of the sash when selecting an inside mount.

How much space should you leave for blinds?

When it comes to spacing for blinds, it is important to consider both the clearance needed for the blind to operate properly, and the clearance needed for safety purposes. Generally speaking, the amount of space needed for most blinds is fairly minimal.

For interior mounted windows, it is suggested to leave 3 to 6 inches of space between the window frame and the top of the blind on the inside of the home. If the blind is corded, an additional 3 to 6 inches space should be kept on either side of the window for additional clearance.

When installing blinds on the exterior of the window, it is recommended that you leave at least 12-inches of space between the window frame and the top of the blind to ensure proper operation and to decrease the likelihood of water damage to the blinds.

It’s also important to keep any cords out of reach of small children to avoid potential safety hazards.

Should blinds be flush with trim?

The answer to this question really depends on the unique circumstances of your home and the overall design aesthetic you are trying to achieve with your window treatments. If your goal is for a modern, sleek look, then flush window treatments may be the best way to go.

If you prefer a more traditional look, then it may be better to add in a little bit of space between the trim and the window treatment. In some cases, leaving a gap between the window treatments and the trim can also be beneficial in terms of the function of the window treatments, as they may open more smoothly and easily if they do not have to undercut the trim.

Ultimately, it is up to you to decide the look that you are going for in your home.

How do I know what size mini blinds to buy?

When selecting mini blinds for your windows, you should consider the size of your windows, the style of mini blinds you would like, and the amount of light you are hoping to let into the room.

Before selecting the mini blinds, it is important to measure your windows correctly. Taking this step ensures that the mini blinds are properly sized and fit the window perfectly. As a general rule, measure the width at the inside trim of the window from one side to the other.

Measure the length in a similar manner, from the top inside trim to the windowsill.

Once you know the size of your windows, you can begin to look at different styles of mini blinds and begin to narrow your choices. Materials, and other features such as cordless operation and waterproof materials.

To find the matching mini blinds, you will need to know the exact size of your windows. Most manufacturers have size charts which will allow you to match up the measurements taken from your own window with the size of mini blinds available.

When you have determined the size and style of mini blinds you would like, consider the amount of light you would like to let in. Vinyl mini blinds are typically the most affordable option, however, if you are looking to block the most amount of light you may want to consider selecting another material such as aluminum, or even blackout mini blinds.

Selecting the correct size mini blinds can help create an inviting and welcoming atmosphere to any room. Taking the time to measure your windows, select the style and decide how much light you would like to let in will help ensure that the mini blinds you purchase will be the perfect fit.

Why won’t my cordless blinds go up?

If your cordless blinds won’t go up, it’s likely due to an issue with the motor. It could be anything from a frayed wire or broken belt, to a problem with the electrical connection or power supply. You may need to have the motor looked at or even replaced.

It’s also possible that the cordless blinds may just be stuck, in which case proper lubrication could be all you need to get them going again. If this is the case, make sure to use a lubricant designed specifically for blinds and be sure to follow the instructions carefully.

If all else fails, it may be time to call in a professional. A trained technician can check the motor and parts of the blinds to determine what the issue is.

How do you attach blinds to metal brackets?

Attaching blinds to metal brackets is fairly straightforward. First, you will need to make sure you have the correct hardware and tools for the job. You should have the blinds, metal brackets, screws, and a power drill.

Begin by preparing the brackets – make sure they are securely installed and level using the provided screws. Place the metal bracket in the window. Then, hang the blinds on the bracket. Many metal brackets have small metal tabs that you can fit the slots in the headrail of the blinds over.

This is the part that extends outward when raising or lowering the shades. The metal tabs should fit tight and keep the blinds securely attached to the brackets.

If the tabs aren’t big enough, you need to use screws to secure the blinds to the brackets. For this, you will need the power drill and screws provided. The top of the blinds should have a row of holes.

These are where you will drill the screws into the brackets to attach the blinds.

Once the screws are in place, check to make sure the brackets and blinds are secure and level. You can also use adhesive putty to secure the bottom of the blinds to the window sill if desired. And that’s it – your blinds should now be securely attached to the metal brackets!.

Should blinds be bigger than window?

Blinds should not necessarily be bigger than the window they are covering as it is more important to have the correct level of light coverage than to adhere to any size requirements. However, if you are looking for an effective light cover, it is often beneficial to have blinds or shades that are wider than the window itself.

This can help to ensure no light is able to leak through the sides of the window frames and will reduce the amount of light entering the room, often with a much more effective result. Before you purchase a set of blinds for your windows, it’s important to be aware of the size of the window as well as any additional restrictions in the area to make sure that the blinds you purchase are the correct size.

Are blinds supposed to touch the window sill?

No, blinds are not typically supposed to touch the window sill. If the blinds are too long, they may create a gap at the bottom, which can allow the heat or cold to escape or enter the room. If the window is deeper than 2 and-1/2 inches, then you may need to order a custom size blind to ensure an optimum fit that doesn’t touch the window sill.

With the right size of blinds, you should have a space of at least 1/4 inch between the blind and window sill. This will also help keep the blind cord away from the window sill, which may prevent any damage and give you a nicer, more finished look.

What do you do when your blinds are not wide enough?

When the blinds are not wide enough to cover the window, there are a few different solutions you can try. One option is to find blinds that are a little bit bigger than the window itself so that you can overlap them to ensure full coverage and get your desired width.

Another option is to look for different styles of blinds with wider slats. Most blinds come in a variety of sizes and styles, so it is best to measure the window and shop around to find the option that will best fit the space.

If all else fails, curtains may be a good option as they come in many different sizes and can be installed in a variety of ways.

Can Roman shades be longer than window?

Yes, Roman shades can be longer than a window. When measuring for the correct size to purchase, measure the height of your window and add an extra 4-6″ for a shade that will reach the sill or bottom of the window frame.

For a shade that will hang several inches below the bottom of the window, add up to 10-12″ to the length. To extend a Roman shade further, you can add a valance or contrast band that extends beyond the shade.

This will not only allow you to customize the length but will also provide increased privacy and style.

Does it matter if venetian blinds are too long?

Yes, it is important to ensure that venetian blinds are not too long as this can create a number of issues. Firstly, if the blinds are too long they may prevent natural light from entering the room, thus creating a dull atmosphere.

Additionally, the blinds may appear clumsy and untidy, detracting from the overall aesthetic of the room. Furthermore, the extra weight of the longer slats can put additional strain on the blinds’ mechanisms, making them more likely to break.

If the blinds are installed too tight at the top they can also become more brittle and easily snapped. As such, it is always advised to measure the window carefully and ensure that the blinds are not longer than the window itself.

Do blinds have to be exact length?

No, blinds do not have to be exact length. Most blinds can be cut to size by the user, whether purchasing premade blinds at a store or having custom blinds created. When purchasing premade blinds, check the manufacturer’s instructions regarding the trimming of excess length.

It’s important to make sure the blinds can be trimmed and that the necessary accessories are included in the package before making a purchase. Custom blinds can usually be cut to the desired length when ordering, but this should be verified with the manufacturer.

It’s important that the width and length measurements for premade and custom blinds are accurate prior to installation or trimming in order to ensure proper fit and functionality.

What if blinds are too long?

If your blinds are too long, there are a few different options at your disposal to help with this problem. The first option is to shorten the blinds themselves. Most new roller blinds come with pre-drilled holes to make the job easier.

You’ll need to measure the curve of the window frame and then mark the holes on the blinds. Take care to ensure they are level before drilling. Wooden blinds should be marked perpendicular to the grain of the wood.

Another option would be to add a bracket or extendible wand. This would provide added support for the blinds, keeping them from drooping or dragging. You can also use a short extension chain, which is designed to tighten the chain loop.

Finally, you can use a strapping system to attach the top of the walls to a secure piece of furniture in the room. This method helps to lift the blinds up, allowing them to fit better.

No matter which option you choose, it’s important to make sure that you get the right measurements and take the necessary safety precautions to avoid accidental injury.

Can you cut blinds that are too wide?

Yes, you can cut blinds that are too wide. To do this, the best tools you will need include a pair of scissors, a ruler, and a utility knife. It’s important to first double check that the blinds will fit your window after they are cut down.

To get started, measure the blinds from end to end and mark out the desired size with a ruler. Use the utility knife to cut along the marked line for a cleaner cut. If the blinds are plastic or vinyl, use a pair of sharp scissors to cut along the marked line.

Then use the scissors to trim off any excess fabric that is left by the cutting. Finally, if necessary, you can use a sandpaper to smooth out the edges of your new blinds.