Skip to Content

How do I space my garage lights?

Spacing your garage lights effectively will depend on the size of your garage and the type of light fixtures you have installed. Depending on the size of the area, you may want to consider installing either 4-foot or 8-foot fixtures.

For a small to medium-size garage, the standard spacing between fixtures is 8 to 12 feet apart. For larger garages, you may want to space your fixtures 12 to 18 feet apart. Consider how much light you want in each corner of the garage.

If you need additional illumination, configure a row of fixtures along one wall. Always remember to include additional fixtures around large entryways, overhead doors, and any large areas you want well lit.

When hanging your fixtures, try to hang them at a consistent height. This will provide an even amount of illumination across the garage. Installing motion-activated lights can also help conserve energy while providing focused illumination when needed.

When the fixtures are spaced evenly, it will create the brightest, most even lighting possible.

How many LED shop lights can you connect together?

The number of LED shop lights that can be connected together depends on the wattage of the lights, the wattage of the circuit, and the type of track that is used to mount the LED shop lights. Typically, LED shop lights range from 4- Watt all the way to 65-Watt.

The maximum wattage that can be put on a circuit is usually around 1,440 Watts for a 120V circuit. Generally speaking, 3 LED shop lights of 4 -Watt each can be connected together.

The type of track that is used to mount the LED shop lights can also affect how many can be connected together in a circuit. Linear tracks are used to mount LED shop lights and they can be configured as either single or two-circuit tracks.

If using single-circuit track, then you can typically connect up to 10 lights and if using two-circuit track, you can connect up to 20 lights (2 lights per circuit).

So in summary, the number of LED shop lights that can be connected together depends on the wattage of the lights, the wattage of the circuit, and the type of track that is used for mounting the LED shop lights.

How far apart should high bay lights be?

The exact spacing required for high bay lights will depend on a number of factors, such as the type of lighting being used, the size and shape of the area, and the desired intensity of light needed for the area.

Generally speaking, for traditional metal halide and high pressure sodium high bay lighting, the recommended spacing should be approximately 20 to 25 feet, with a maximum distance of 30 feet. For LED high bay lighting, the recommended spacing is typically closer, falling in a range of 12 to 20 feet, depending on the wattage and type of LED lighting being used.

It is also important to consider the mounting height of the high bay lights and their light throw, as this will also affect ideal spacing in the area. When in doubt, contact a professional lighting expert to determine the best spacing and mounting height for your specific situation.

How many high bay lights do I need in my shop?

The number of high bay lights you will need in your shop will largely depend on the size and type of activities going on in your shop. Generally, the larger the shop, the more high bay lights you will need.

Additionally, different types of activities in the shop may require different amounts and types of lighting. For example, if your shop is used for highly detailed work, you may need more high bay lights to provide adequate illumination.

In order to determine how many high bay lights you need, you should first measure the length, width, and height of the shop to calculate the square footage. Once you have the shop’s overall size, you can determine the number of high bay lights you need.

As a rule of thumb, you will likely need at least 45 watts of lumens for every 10 to 15 square feet of space, or one light for every 1000 square feet.

Additionally, it is important to consider the type of light placement in the shop. The general recommendation is to have the lights evenly distributed across the shop. To achieve optimal illumination, many people also experiment with multiple layers of lighting, including lower-wattage recessed lighting in addition to the higher wattage of the high bay lights.

Finally, it is important to remember that the number of lights needed may be increased or decreased based on the type of work being done in the shop, as well as any other needs such as emergency lighting or other safety considerations.

It is always best to consult an experienced lighting designer to determine the best lighting solution for your shop.

How many light fixtures do I need?

The number of light fixtures you need depends on the size of the area you are lighting, the type of lighting you plan to use, and your desired level of brightness. Generally speaking, you should plan on having one light fixture per 8-10 square feet if you plan to use standard lighting (incandescent, halogen, or fluorescent).

It is important to consider the purpose of each area you are lighting when calculating the number of light fixtures. For instance, a working space will typically require more light than an area for relaxing, so you may want to plan for up to three fixtures per 8-10 square feet.

On the other hand, if you want to create a low-lit ambience in a relaxing space, you may want to plan for one light fixture every 15-20 square feet.

If you plan to use task lighting (such as desk lamps or sconces), you should plan for one or two fixtures for the area you want to illuminate. When using task lighting, it is best to place the fixture close to where the task will be performed.

Finally, if you plan to use directional lighting (track lighting, wall washers, or spotlights), you should plan on one fixture per 4-6 square feet.

Ultimately, the number of light fixtures you need will depend on various factors, so it can be useful to have an experienced electrician review your plans so that they can recommend an appropriate number of fixtures.

How do I choose high bay LED lights?

Choosing the right high bay LED lights for your facility is an important decision and the right LED lighting solution can make a big difference in both the functionality and aesthetics of your space.

The following tips will help you pick the best high bay LED lights for your needs.

1. Determine the right number of lumens. The amount of light emitted by an LED light is measured in lumens. To determine the right number of lumens, add up the area in square feet of all the surfaces that need to be illuminated and multiply it by whether the area needs low (20-50 lumens/sq. ft.

), medium (50-75 lumens/sq. ft. ) or high (75-100 lumens/sq. ft. ) lighting.

2. Understand the different CCT options. CCT stands for Correlated Color Temperature, and it refers to the color temperature of the light produced. Warmer lights lean more red/yellow and cooler lights lean more blue.

The temperature of the light impacts the visual comfort of the space.

3. Choose the number of LEDs you need. High bay LED lights usually utilize two or three LEDs per lamp, but you may need more depending on the area you need to cover.

4. Consider the wattage. The wattage of a LEDs is the amount of energy it needs to run and it can vary significantly. You want to ensure you are getting the most energy-efficient high bay LED you can.

5. Decide on a fixture type. High bay LED lights come in a variety of fixture types including linear, round, and flat panel. Consider the size, shape and features of the space before choosing a light.

You’ll also want to factor in the maintenance requirements for each fixture type.

By following these guidelines and doing your own research on the high bay LED lights available on the market, you should have no problem finding the perfect LED lighting solution for your space.

How many lumens do you need for a workshop?

When considering the number of lumens needed for a workshop, it is important to consider the size of your workshop as well as the activities that will take place. If your workshop is small, then you may need fewer lumens than if it is large.

For general tasks, a minimum of 200 to 400 lumens is recommended per square foot in the workshop area. If the workshop is large and used for intricate work that requires accuracy, such as welding, then higher wattages and therefore more lumens are likely needed.

It is also important to note that the color temperature of the light source will have an effect on the number of lumens required. Warmer colors, such as yellow or amber, will require fewer lumens to brighten up the area than cooler colors like blue or white.

The amount of natural light in the space should also be taken into account, as this could reduce the number of lumens required. Taking into consideration all of these factors, you should be able to determine the number of lumens you need for your workshop.

How many foot-candles does a warehouse need?

The amount of foot-candles a warehouse needs will depend on the size and type of activities happening in the warehouse. For example, a warehouse that contains mostly storage will require less lighting than a warehouse that includes many assembly tasks.

As a general rule of thumb, warehouses should strive for an average of 50 foot-candles (measured at floor-level). Areas that require more detailed work, such as painting or thread cutting, should aim for up to 75 foot-candles.

It’s important to remember that the foot-candles required can also vary based on the time of day and the type of lighting used. For example, fluorescent lighting will require less foot-candles to produce the same amount of light as incandescent lighting.

Additionally, natural light can reduce the amount of foot-candles needed in the warehouse by as much as one quarter. In these cases, it’s important to supplement natural light with appropriate artificial lighting when necessary.

What is the formula for calculating lighting?

The formula for calculating lighting depends on the type of lighting system you are trying to design. For basic lighting design, the general formula used is Illuminance (E) = Luminous Flux (Φ) / Area (A).

Illuminance is the amount of light that falls on a given area, measured in lumens per square meter (lm/m2). Luminous Flux is the total amount of light that a light fixture emits, measured in lumens. Area is the area of the space or surface being illuminated, measured in square meters.

For more complex lighting designs, several other factors are taken into account, such as the shape, orientation, and reflectivity of the space being illuminated, and the types of lamps being used. Different lighting calculations may be needed depending on the purpose of the lighting design, such as energy-efficiency, task lighting, safety and security, or aesthetic appeal.

In general, when designing a lighting system, it is important to consider the type of space, the size of the space, the positioning of the lights, and the lamps being used. These will help you to determine the correct type, quantity and positioning of the lights, as well as the best type of lamps to use.

Ultimately, the goal is to create a lighting system that meets the requirements of the space and provides the desired levels of light.

How do you calculate lighting layout?

Calculating lighting layout is highly dependent on the type of lighting and the environment in which it will be used. However, some general tips can be helpful when determining where to place lighting fixtures.

The first step is to consider the size and shape of the area that needs to be lit. Start by measuring the area to have a better understanding of the space, and then decide what type of lighting fixtures you will use.

Once you have determined the type of fixtures, place them throughout the area using the following tips:

• Place lighting fixtures 15-20 feet apart

• Illuminate important areas such as walkways and areas which require more direct light

• Make sure the height of your fixtures is appropriate for the ceiling height

• Incorporate accent lights in darker areas to bring out featured elements

• Utilize wall lighting to offer indirect illumination while creating a dramatic effect

• Add dimmer switches to control the brightness

When deciding how many lighting fixtures to use, determine how much light is needed by considering the size of the area, the ceiling height, and any additional elements. Once the fixtures are in place, it’s important to test them and make adjustments if needed.

This way, you can create the lighting layout that works for your environment.

How are lux hours calculated?

Lux hours are a metric used to measure the intensity of light over time. Lux hours are calculated by multiplying the illuminance value of the light source (measured in lux) by the duration of the time period (measured in hours).

The resulting lux hour value provides an accurate representation of the total amount of light that the light source will be emitting during that period of time. For example, if a light bulb has an illuminance of 150 lux and the time period is 4 hours, then the total lux hours would be 600.

It is important to note that lux is a unit that measures the amount of light energy per unit area, therefore, the total lux hours produced by the light source will depend on the size of the area being illuminated as well.

How bright is 1000 lumens?

1000 lumens is considered very bright, equivalent to the brightness of about four 100 watt incandescent light bulbs. To give perspective, the average reading lamp emits about 40 lumens of light, while an outdoor security light can range from 700 to 2200 lumens.

Therefore, 1000 lumens is much brighter than a typical home or office light fixture. Depending on the type of bulb and fixture, 1000 lumens of light can be very intense and even blinding in some cases.

It is not typically used indoors, but is often used outdoors in bright area such as parking lots, stadiums, and garage areas.