Skip to Content

How do I use the Scosche aux?

The Scosche aux is a small, handheld device that allows you to play music from your smartphone or other music-playing device through your car’s speakers. It plugs into your car’s cigarette lighter socket and has a 3.

5mm Aux input for connecting to your device.

To use the Scosche aux, first make sure that it is properly plugged into your car’s cigarette lighter socket. Next, take your music-playing device and connect it to the Scosche aux using a 3. 5mm Aux cable.

Once your device is connected, you should see a blue LED light on the Scosche aux indicating that it is powered on. Finally, press play on your music-playing device and the music should begin playing through your car’s speakers.

How do I connect my Scosche FM transmitter to aux?

To connect your Scosche FM transmitter to aux, first plug the aux cord into the Scosche and then plug the Scosche into your car’s cigarette lighter. Once it’s plugged in, press the power button on the Scosche and then use the frequency buttons to tune into an unused FM frequency.

Once you’ve found an unused frequency, turn on your car stereo and change the input to aux. You should now be able to hear any audio that’s playing on your Scosche through your car’s speakers!.

How do you use a Bluetooth aux cord?

To use a Bluetooth aux cord, first make sure that your aux cord is compatible with your Bluetooth device. Most Bluetooth aux cords will have a 3. 5mm audio jack. Next, plug the aux cord into the AUX IN port on your Bluetooth device.

If your device does not have an AUX IN port, you will need to use a Bluetooth adapter. Once the aux cord is plugged in, press the Bluetooth button on your device to put it into pairing mode. Then, press the Bluetooth button on the aux cord.

The aux cord and the Bluetooth device should now be paired. To use the aux cord, simply press the play button on your Bluetooth device.

What is Bluetooth AUX?

Bluetooth Aux is a technology that allows you to connect your phone to your car’s audio system without the use of a wired connection. This can be extremely convenient if you want to listen to music from your phone while you’re driving, or if you want to use your phone’s navigation system without having to fumble with wires.

Bluetooth Aux can also be used to make hands-free calls if your car is equipped with hands-free calling capabilities.

How can I play music in my car with aux?

Your car stereo may have an aux input that you can use to play music from your phone or other device. If your car stereo does not have an aux input, you may be able to use a Bluetooth adapter to connect your phone to the car stereo.

How do I get my aux to work?

In order to get your aux to work, you will need to connect the aux cord to the aux in port on your car stereo. Once it is plugged in, you should be able to play music from your phone or another audio device through the car speakers.

What does AUX in mean on a speaker?

Auxiliary (AUX) input on a speaker refers to a specific audio input port designed to receive an external audio signal from a connecting device. The signal is then amplified and played through the speaker.

The most common types of connectors used for AUX inputs are 3. 5 mm mini-jacks and RCA jacks. In order to use the AUX input, you will need to have a cable that is compatible with the input ports on both the speaker and the audio source.

For example, a 3. 5mm mini-jack to 3. 5mm mini-jack cable can be used to connect an MP3 player to a speaker with a 3. 5mm AUX input.

Why isnt my Scosche Bluetooth connecting?

The most likely reason why your Scosche Bluetooth is not connecting is because it is not properly paired with the device you are trying to connect it to. Make sure that the Scosche Bluetooth is in pairing mode and within range of the device you are trying to connect it to.

If it still does not connect, then there may be an issue with the Scosche Bluetooth itself and you may need to contact customer support for further assistance.

Does Scosche have an app?

Yes, Scosche actually has two apps that are available on the App Store. The first app is called the Scosche Rhythmshare and it allows users to share music and connect with other people who have the app.

The second app is called the Scosche myTunesController and it allows users to control their music from their iPhone or iPod Touch.

How do I pair my Scosche heart rate monitor?

First, make sure that your Scosche heart rate monitor is charged. To do this, plug the USB cable into the charging port on the back of the monitor and then into a USB power source. Once the monitor is fully charged, press and hold the power button for three seconds to turn on the device.

Next, open the Scosche app on your phone and tap on the “Devices” tab at the bottom of the screen. Then, tap on the “Add Device” button and select “Heart Rate Monitor” from the list of available devices.

Once the app has found your Scosche heart rate monitor, tap on the device to connect it. You may be prompted to enter a PIN code; if so, simply enter the four-digit code found on the back of the monitor.

After your Scosche heart rate monitor has been paired, you can view your heart rate data in the app. To do this, tap on the “Dashboard” tab and scroll down to the “Heart Rate” section. Here, you’ll see your current heart rate, as well as your average heart rate for the day.

How do you pair Scosche FlyTunes?


The first way is to use the 3. 5mm audio cable that is included with the FlyTunes. Simply connect the 3. 5mm audio cable to the FlyTunes and then to the audio jack on your device. The second way to connect your Scosche FlyTunes is to use Bluetooth.

To do this, turn on the Bluetooth on your device and then put the FlyTunes in pairing mode by pressing and holding the power button for 3 seconds. Once the FlyTunes is in pairing mode, it will show up on your device’s Bluetooth list.

Select the FlyTunes from the Bluetooth list and the two devices will pair. The last way to connect your Scosche FlyTunes is to use the USB charging cable. This will not only charge the FlyTunes, but will also allow you to use the FlyTunes as a USB audio device.

To do this, simply connect the USB charging cable to the FlyTunes and then to your computer.

Why is my Bluetooth transmitter volume so low?

It could be due to a hardware issue, such as a faulty component in the device itself. Alternatively, it could be a problem with the way the device is configured – for example, if the audio settings are not properly optimized for your particular setup.

Finally, it is also possible that there simply isn’t enough power going to the device to produce adequate volume levels.

If you’re not sure what the problem is, the best course of action is to start by troubleshooting the hardware. First, check to make sure that all the connections are secure and that there is no physical damage to the device.

Next, try playing around with the audio settings to see if you can find a better balance of sound quality and volume. If neither of these solutions works, it’s possible that the Bluetooth transmitter just isn’t powerful enough for your needs and you’ll need to invest in a more robust device.

Why is the volume so low on my FM transmitter?

One reason could be that the batteries in the transmitter are weak and need to be replaced. Another reason could be that the antenna on the transmitter is not positioned correctly. If the antenna is not pointing directly at the radio, the signal will be weaker.

You can also try moving the transmitter closer to the radio.

How can I make my FM transmitter louder?

One way is to use a higher quality antenna. A better antenna will enable your transmitter to broadcast a stronger signal. Another way to make your FM transmitter louder is to increase the power output.

Check the manufacturer’s specifications to see how much power your transmitter can output. You may be able to increase the power output by adjusting a setting on the transmitter or by using a different power adapter.

Finally, you can try placing the transmitter in a different location. If the transmitter is close to a metal surface or in a crowded area, the signal may be weaker. Try moving the transmitter to a different location to see if the signal strength improves.

How do I change the Bluetooth channel on my Scosche?

To change the Bluetooth channel on your Scosche, first put the Scosche into pairing mode by holding down the power button for 3 seconds. Next, use your phone or other device to scan for Bluetooth devices.

Once the Scosche appears in the list of available devices, select it and enter the PIN (usually 0000). After the Scosche is paired with your device, go into the Scosche’s settings menu and select the “Bluetooth” option.

From here, you should be able to select the desired Bluetooth channel.

What is a Scosche FM transmitter?

A Scosche FM transmitter is a device that uses FM radio frequencies to send audio signals from one source to another. The transmitter itself is a small, portable device that can be plugged into any audio source, such as an MP3 player, and then broadcasted over an FM radio signal to any nearby FM radio.

This allows you to listen to your audio source through any FM radio, without the need for wires or a separate audio player.

Why is my Bluetooth car adapter static?

If your Bluetooth car adapter is emitting a static noise, there are a few potential causes. First, check to see if the adapter is properly plugged into the car’s cigarette lighter port or other power source.

If it is not plugged in correctly, this can cause the adapter to produce a static noise.

Another potential cause is interference from other electronic devices in the car. Bluetooth car adapters can be interference from things like, car alarms, CB radios, or even other Bluetooth devices. If you think interference might be the problem, try moving the adapter to a different location in the car, away from any other electronic devices.

Finally, if none of the above solutions work, it is possible that the Bluetooth car adapter is defective and will need to be replaced.

How do you use the wireless hands-free car kit?

Most wireless hands-free car kits come with a suction cup or other type of mount to affix the device to your dashboard or windshield. Once the device is mounted, follow the manufacturer’s instructions to connect the kit to your car’s stereo system.

After the kit is connected, you should be able to make and receive phone calls through the car’s speakers.

Leave a comment

Your email address will not be published.