Cleaning a newly constructed house is an important part of preparing it for occupancy. It’s also important to clean up the dust, debris and construction materials left behind. The following steps will help you prepare your new home for move-in day:
1. Start by dusting, vacuuming, and mopping the floors. Don’t forget to vacuum carpets and rugs.
2. Clean walls, ceilings and other surfaces such as windowsills and baseboards.
3. Wash surfaces such as countertops, appliances and cabinet fronts with mild detergent to remove dust and debris. Rinse thoroughly and dry with a soft cloth.
4. Clean any interior glass surfaces, such as windows and mirrors by using a glass cleaner.
5. Vacuum any upholstered furniture, draperies and curtains, if present. If the furniture has removable cushion covers, take them off and either wash them or take them to a dry cleaner.
6. Use a ladder to clean hard to reach places like high windows, ceiling fans, and light fixtures.
7. When all the surfaces and furniture in the house have been thoroughly cleaned and dried, it’s time to adjust all the heating and cooling systems and make sure that all locks and alarms are functioning properly.
Finally, inspect the work of the builders and the specific features of your new home such as insulation and lighting, and make sure that they have been properly installed and completed.
With these steps covered, your brand new house should be clean and move-in ready.
How do I get rid of construction dust in my house?
Getting rid of construction dust in your house requires a few steps. First, it’s important to clean up large debris as soon as possible — vacuum it up with a high-powered vacuum designed for construction dust or sweep/vacuum it up with an industrial vacuum.
Second, damp mop the floors and walls with a damp microfiber towel or mop. Third, use an oil-based paint to seal any surfaces that may be exposed to construction dust. Fourth, use an air purifier equipped with a HEPA filter to capture airborne dust.
Finally, vacuum the furniture, drapes, and any other fabric surfaces with a vacuum equipped with a HEPA filter. Additionally, you can also have an air duct cleaning service come to your home and clean your air ducts and HVAC system — this is especially important because construction dust can build up in the ducts and re-circulate in the air.
Following these steps should help to get rid of most construction dust in your home.
How clean should a new house be before moving in?
A good rule of thumb when it comes to a new home is that it should be move-in ready. This means that the home should be completely clean and free of clutter. Carpet should be vacuumed, floors should be mopped, and walls should be dusted and/or wiped down.
If there is wallpaper, it should be in good condition. All light fixtures should be free of dust and wiped down. As far as bathrooms and kitchens go, tile should be scrubbed, toilets should be sanitized, and windows should be washed.
Appliances should be wiped down, and all surfaces and countertops should be cleaned thoroughly. It’s also a good idea to make sure all of the locks are changed and the smoke and carbon monoxide detectors are properly installed and functioning.
By taking these steps, you can be sure that your new home is clean, safe, and ready for you and your family to move in.
What are the three phases of post construction cleaning?
The three phases of post-construction cleaning are debris removal, rough cleaning, and final cleaning.
First, debris removal is done to remove any remaining construction or demolition debris from the premises. This typically includes removal of discarded cardboard and other packaging, taking away scrap lumber, plaster and paint chips, sawdust, concrete, and nails.
Some construction sites may require special equipment to perform the debris removal, such as a dumpster, hoisting machine, or bobcat.
Next is rough cleaning, which is the removal of dust, dirt, and mud, to restore the surfaces to their pre-construction forms. Rough cleaning also consists of washing down walls, ceilings, windows, and floors to remove dust and grime.
This step also involves vacuuming of carpets and walls, and wiping down surfaces to remove dust and dirt.
Lastly is final cleaning, which is the thorough cleaning once everything else is done. Final cleaning usually includes scrubbing walls and tile, mopping the floors, cleaning windows, shampooing carpets and rugs, and polishing fixtures.
Final cleaning is done to ensure the premises are in a pristine condition and ready for occupancy.
Is post construction cleaning hard?
Post construction cleaning can be hard depending on the situation. It often requires cleaning up very dusty surfaces and getting rid of dirt, grime, and debris. It also involves wiping down windows and walls, vacuuming carpets, mopping floors, and scrubbing surfaces.
Cleaning after construction can be especially difficult if there is a large amount of debris that needs to be cleared away. Depending on the size of the construction project, post construction cleaning could take multiple days or even weeks to complete.
Additionally, the tools required to do a thorough job—such as industrial-strength cleaners and vacuum cleaners—can be expensive and hard to come by, making it even harder to clean up a construction site.
What is involved in a construction clean?
A construction clean typically involves a deep clean of a building or site after construction or renovation work has been completed. This can include removal of dust, dirt, debris and any other materials that have been left behind by the contractors.
It involves dusting, mopping and sweeping of all surfaces – including walls, floors, furniture, fixtures and fittings – to ensure that the space is clean and ready for use. In addition, all windows, doors, frames and sills should be wiped down, and carpets should be vacuumed and shampooed, if necessary.
Other tasks may include painting and minor repairs, such as caulking of joints. Once the area is clean, all hazardous materials and garbage should be removed from the site in accordance with safety regulations.
The construction clean can also include polishing, waxing and other finishing touches to ensure the area is clean, safe and ready for use.
What is post construction?
Post construction is the process that takes place after a building or structure has been completed and is ready for occupancy. It typically involves completing a variety of tasks such as completing inspections, ensuring that the building is properly furnished and finished, addressing any maintenance or repair needs, and providing the necessary permits or licenses for occupancy.
Depending on the size and scope of the project, post construction activities can range from simple tasks such as completing inspections and obtaining occupancy permits, to more complex activities such as furniture assembly, painting and wallpapering, cleaning and repairs, as well as landscaping.
Other post construction activities can include adjusting lighting systems, completing electrical work, and installing security alarm systems. Once a building is ready for occupancy, post construction activities can help ensure that the building is properly set up and ready for use.
What is a rough clean?
A rough clean is a basic cleaning technique used to remove dirt, dust, and other debris from a surface. This type of cleaning is often done prior to a more thorough, deep clean. It may include wiping down surfaces with a damp cloth, vacuuming and sweeping.
It is important to note that it is a less intensive type of cleaning than the deep cleaning that follows. A rough clean helps remove visible dirt, cobwebs, and dust in order to prepare a surface for a deeper clean.
Additionally, it may help identify areas that require a deeper clean, such as deep stains or accumulated dirt in hard to reach places. This quick cleaning will help you tackle deeper cleaning tasks faster, as it will give you a better idea of what is needed.
What is deep cleaning?
Deep cleaning is a comprehensive, thorough cleaning of a space that goes beyond the typical light or surface cleaning. It is a much more intense and detail-oriented clean that targets areas which are not frequently attended to on a day-to-day or weekly basis.
It is often used to return a home or space to a like-new condition or to prepare a space for a move in or move out.
Deep cleaning includes dusting ceiling fans, wiping down blinds, scrubbing appliances and cabinets, spot cleaning walls and baseboards, washing windows and window sills, cleaning behind and under furniture, mopping floors and vacuuming carpets, and more.
Deep cleaning can be done as needed – like before a big gathering or a move out – or on a regular semi-annual, quarterly, or monthly basis for those who rely on a strict cleaning regimen.
It is important to note that deep cleaning does not typically include cleaning the interior of the fridge or oven. For the most thorough clean, you may need to enlist the help of a professional deep cleaner.
In some cases, what was once a deep clean can become a basic cleaning routine if done on a regular basis.
What does a new build cleaner do?
A new build cleaner is responsible for cleaning new buildings as they are built or renovated. This job involves a variety of tasks such as cleaning interior and exterior walls, windows, floors, and fixtures.
The job also requires that the cleaner pay attention to detail and check for dirt, dust, and debris that is left over from construction. It is important for the cleaner to use the correct cleaning products or materials, which may include cleansers, polishes, and degreasers.
Further tasks may include steam cleaning carpets, dusting, polishing wooden furniture and fixtures, vacuuming and mopping, removing cobwebs, and ensuring that the floors, walls and other surfaces are clean and left in a pristine condition.
Additionally, the cleaner may be required to disinfect certain things such as tile, toilets, and countertops. The new build cleaner must also be able to work in a variety of locations, such as homes and offices.
Finally, they must keep the work environment safe.
What should be included in a deep cleaning checklist?
A deep cleaning checklist should include the following:
– Dusting and cleaning of all surfaces, including countertops, shelves, window sills, moldings/baseboards, furniture, door/window frames, blinds and ceiling fixtures
– Vacuuming and mopping all floors, carpets, and upholstery
– Deep cleaning of any walls or other surfaces that may have become stained or discolored over time.
– Washing down of all kitchen appliances, including the refrigerator, stove, microwave, sink, and dishwasher
– Cleaning of all tile, including grout and grime removal
– Cleaning of all bathrooms, including scrubbing of showers, tubs, toilets, sinks, countertops and mirrors
– Sweeping and scrubbing of all exterior areas, including patios, decks, and pathways
– Cleaning of all windows, both inside and outside
– Cleaning of all light fixtures, as well as all fans, outlets, and switches
– Cleaning of all blinds and curtains
– Cleaning of any air vents
– Organizing all closets and cupboards
– Cleaning all exterior fixtures, such as the garage door and driveway, as well as the house siding and trim
How do I make a house cleaning checklist?
Making a house cleaning checklist is a great way to ensure that you are completing all of your necessary cleaning tasks. Although there are many different checklists available online, it is important to customize your checklist to ensure that all important tasks are completed and nothing gets overlooked.
Here are some steps to get you started on your custom house cleaning checklist:
1. Identify Your Must-Do Tasks – Start by listing all the tasks, both big and small, that need to be done in order for your home to be truly clean.
2. Prioritize Tasks – Once you have your list, prioritize the tasks according to importance. Consider the frequency of each task – often tasks that need to be done more frequently can be given higher priority.
3. Break Down Large Tasks – Divide unique and large projects into smaller tasks. For example, if vacuuming is a task you need to complete, breaking it down further into tasks that need to be completed like dusting, sweeping and mopping will help you stay on top of the job.
4. Create a Schedule – Create a schedule that works best for you, considering time commitment and timeframe. Include the frequency of your tasks and when should they be completed.
5. Gather Supplies – Once your schedule is completed, gather the necessary supplies. This could include the vacuum cleaner, duster, broom and mop for your cleaning tasks.
6. Check off Tasks – As you complete each task, check it off your list. This will help you stay motivated and ensures that you are completing all tasks on the list.
By following these steps, you should be able to easily create a custom house cleaning checklist that works for you and keeps your home clean and tidy.
What is a normal cleaning routine?
A normal cleaning routine should incorporate cleaning tasks that are done on a daily, weekly, and monthly basis. On a daily basis, it is important to sweep and mop hard floor surfaces, vacuum carpets, wipe down kitchen and bathroom surfaces, empty the garbage, and tidy up any messes that may have been made.
On a weekly basis, a thorough cleaning of the bathrooms and kitchen should be done. This includes cleaning the tub, shower, sink, toilet, and kitchen counters and appliances. On a monthly basis, deep cleaning tasks should be done such as washing the interior and exterior of the refrigerator, wiping down cabinets and drawers, and cleaning the windows.
Additionally, items that are not used as frequently should be dusted and vacuumed. A normal cleaning routine should also include washing bedding weekly and regularly washing the curtains and blinds. Lastly, it is important to vacuum furniture such as sofas and chairs in addition to vacuuming floors and carpets.
What is a good weekly cleaning schedule?
A good weekly cleaning schedule should include regular tasks as well as deep cleans for specific rooms. To maintain a clean home, try to do these activities every week:
• Vacuum high-traffic areas such as living rooms or halls
• Wipe down countertops, tables, and other surfaces
• Dust furniture and accessories
• Wash any bedding and blankets
• Clean the bathrooms, including showers and toilets
• Clean the kitchen appliances and surfaces
• Sweep and mop the floors
• Remove any cobwebs
• Empty the trash
• Sanitize door handles, light switches, and remotes
For deep cleans, focus on one room a week. This may include things like scrubbing the floors and walls, dusting baseboards, polishing surfaces, and cleaning carpets. You may also want to rearrange furniture and closets.
And finally, pull out the vacuum cleaner attachments to tackle those pesky nooks and crannies.
What is task list in housekeeping?
A task list in housekeeping is a list of chores or tasks to be completed by a housekeeper. This is typically a daily, weekly, or monthly list that outlines the specific responsibilities of the housekeeper.
Depending on the size of the household, these tasks could include vacuuming, dusting, doing laundry, changing bed sheets, cleaning bathrooms, cleaning kitchen, stocking supplies, and organizing closets.
In larger households, the task list may also include tasks such as grocery shopping and cleaning outdoor areas. The task list helps ensure that the housekeeper knows exactly what needs to be done, and when.
It also helps the employer to ensure that the housekeeper is following a schedule and staying on task.
What are the housekeeping needs?
Housekeeping needs vary depending on the specific environment and the size of the facility. Generally, housekeeping needs include daily tasks such as cleaning, dusting, vacuuming, mopping, sweeping, and scrubbing floors, toilets, and countertops; emptying wastebaskets or replacing liners; cleaning showers, tubs, and sinks; and dusting, polishing, and straightening furniture and fixtures.
Additional housekeeping needs may include cleaning windows, walls, and ceilings; polishing mirrors and brass; washing carpets; and cleaning kitchen appliances and surfaces. In some environments, housekeeping duties may also include disposing of hazardous waste and ensuring the security of doors and windows in the facility.
In addition to daily housekeeping needs, periodic needs include deep cleaning carpets, grinding and polishing floors, sanitizing drains, and stripping and waxing surfaces.
How do you define housekeeping?
Housekeeping is the management, coordination, and oversight of the activities and tasks involved in running a home or business. It includes tasks such as cleaning, organizing, laundry, shopping, cooking, bill payment, and other related activities.
Generally, housekeeping is a more detailed and specific term than cleaning, as it involves the overall organization and maintenance of a property. It can also include more complicated tasks such as scheduling maintenance visits and repairing small issues.
Proper housekeeping is critical for maintaining the safety and functionality of a home or business.