Skip to Content

How do you double crown molding?

Doubling crown molding involves adding a second layer of the same or a different style of crown molding over an existing layer. To begin, measure the space and add a couple of inches for the return trim that wraps the flat area or wall inside the crown molding.

Use a table saw to cut both the original layer and the additional layer at a 45-degree angle for the corner pieces. Secure the pieced together corners in the area where the old and new pieces join, making sure the seams line up.

Drill pilot holes and secure with nails. When complete, caulk the seams, then paint to match the molding and wall.

How do you install two piece crown molding on kitchen cabinets?

Installing two-piece crown molding on kitchen cabinets is a fairly straightforward process that can be achieved with some patience and the right tools. It does require cutting the moldings at specific angles, so a miter saw comes in handy for this task.

Here’s a step-by-step guide on how to install two-piece crown molding on kitchen cabinets:

1. Measure your cabinets: Before doing anything else, take careful measurements of your cabinets—including their width and height—so that you know what size and shape pieces of crown molding to get.

2. Purchase crown molding: Determine the style of crown molding you want and purchase pieces in corresponding lengths. The molding should be at least 1-2 inches wider than the total width of your cabinet, and you’ll need enough to cover the entire perimeter of the cabinet.

3. Cut the molding: Set up your miter saw and use it to cut the two pieces of crown molding at the appropriate angles. Aim to cut the left piece of molding at a 45-degree angle to the right, and the right piece of molding at a 45-degree angle to the left.

4. Attach the molding: Line up the angles of the pieces carefully and attach them to the top of the cabinet with nails. Depending on the type of molding you have, you may need to use a combination of nails and glue to secure the molding properly.

5. Add trim: To give the cabinet a neat, finished look, attach wood trim across the gap between the two pieces of crown molding.

6. Sand and paint: Use sandpaper to smooth any unevenness and then paint to finish the look.

Following these steps will help you install crown molding on your kitchen cabinets, adding charm and sophistication to your home.

Should cabinet crown molding touch the ceiling?

Yes, cabinet crown molding should touch the ceiling. When the molding touches the ceiling the room looks more unified, creating visual appeal. Crown molding brings the ceiling down, making rooms seem taller and cozier.

The molding also covers any gaps between the cabinets and the walls or ceilings and gives the room an elevated and polished look. To achieve a secure fit, the top of the crown should be nailed directly into the ceiling, while the lower part should be nailed into the upper cabinet.

If the crown molding is wider than the cabinets, it should be secured with furring strips. Also, make sure that the ceiling is level and the cabinets are installed correctly for best results.

Is crown molding on kitchen cabinets outdated?

Crown molding on kitchen cabinets is a personal preference. While crown molding does add a certain classic look to the kitchen, it is not necessarily outdated. In fact, there are many people who prefer the more traditional look of a kitchen with crown molding.

For those who prefer a more contemporary look, there are other options. Frameless cabinets with clean lines and simple finishes may be more suitable. Additionally, floating shelves are becoming increasingly popular, especially in a more modern kitchen.

Ultimately, it comes down to personal preference and what look best suits your particular space.

How do you install filler strips on top of cabinets?

Installing filler strips on top of cabinets is an important part of creating a professional looking kitchen or other cabinetry setup. Filler strips are smaller pieces of wood that are placed on top of the cabinetry to fill in any small gaps that exist between the cabinetry and the wall or any adjacent cabinetry.

To install, first measure the length and width of the empty space you want to fill with the filler strip, then cut the strip of wood to the correct sizes. Next, position the strip on top of the cabinetry and use a level to ensure it is straight.

Lastly, attach the filler strip with a power drill and screws that are designed for this task — these may be included when purchasing the filler strips or you can buy them separately. Check to ensure all the screws are securely fitted and you’re done!.

Should kitchen cabinets have crown molding?

Yes, kitchen cabinets should have crown molding for several reasons. It can provide additional structure to the cabinets and improve their strength. Additionally, crown molding can give the cabinets a more finished and polished look.

Furthermore, it can help disguise any imperfections in the cabinets, like uneven heights or gaps between them. The molding can also tie together all the cabinets, creating a cohesive look, while helping to disguise the upper edges of cabinets that are particularly visible.

Finally, crown molding can create a pleasing transition between the cabinets and the ceiling. When installed correctly, it can help the cabinets blend in with their environment and give the kitchen a more elegant and timeless aesthetic.

All of these factors make crown molding an excellent choice for kitchen cabinets.

Does it matter which way you put up crown molding?

Yes, it does matter which way you put up crown molding. The direction of the crown molding is determined by the angles of the walls surrounding the room. The room should look balanced and symmetrical, which means that the crown molding should be aligned with the wall at a consistent angle.

If the crown molding is not matched with the proper angle, it can appear misaligned and can create an off-balance aesthetic. Additionally, the direction of the crown molding should also be based on the direction that the natural eye follows.

The top of the molding should angle toward the center of the room, regardless of the room’s shape, as this helps create a more pleasing visual triangle. The direction of the crown molding should also be consistent throughout the room.

In some cases, this may require cutting the molding in two different parts in order to achieve the correct angle that meets the needed ledge. By paying attention to the direction of the crown molding, one can achieve a more balanced, symmetrical, and cohesive look for the room.

How do you tell if crown molding is upside down?

When it comes to determining if crown molding is upside down, there are several key factors you should look out for. Firstly, note the direction of the beveled cut – this should always be pointing up towards the ceiling.

If it’s pointing down towards the floor, then the molding is upside down. Furthermore, the moulding should be longer on top and shorter at the bottom so that any light sources (such as ceiling lights) don’t cast any unwanted shadows.

Lastly, pay attention to the look of the underside of the crown molding. If you can see the flat back of the moulding, then that’s a telltale sign that it’s upside down. While there may be cases where the crown molding is upside down and still looks okay, if you want your crown molding to look its best and make a statement, then take the time to ensure it’s installed the right way up.

Which side of crown moulding is the top?

The top side of crown moulding is the side that is visible when installed. Generally, the top side should be flat and framed with decorative designs. It should also be painted or sealed with a protective coat to enhance its appearance.

The back/bottom side of crown moulding should be angled to fit the flat side into the wall. When installing crown moulding, it is important to pay attention to the top side to ensure that the design and angle are correct, and that it is adequately sealed or painted.

How far down the wall does crown molding go?

Crown molding typically goes down to within a couple of inches of the top of the base trim boards, such as baseboards. Some people choose to add a larger crown molding and have it protrude up the wall farther, perhaps even up to the ceiling.

In that case, the crown molding would be installed at the desired height. However, the typical installation method is to have the crown molding stop a few inches above the top of the base trim boards.

In most cases, the crown molding should be installed in a way that draws the eye up to the ceiling, helping to create a visual transition between the wall and the ceiling.

How do you join trim corners?

Joining trim corners is not a difficult process—with the right tools and materials it can be done quite easily. The first step is to measure and cut the trim pieces to the correct length. Once all of the pieces are cut, the next step is to join the corners.

To do this, use a coping saw to cut a 45 degree angle about ¼ inch long on the inside corner of each adjoining piece. For a cleaner fit, use a chisel to shave away any burrs on the corners. Next, apply a generous amount of glue to the cut angles and join the pieces together.

Using a hammer and nail, add a few finishing nails to the joint to secure it. Finally, use sandpaper to smooth out the edges and joints. With these few steps, the trim corner is successfully joined.

What is shoe Moulding?

Shoe moulding is a type of wood trim that is normally used to edge internal door casings, windows and other trim. It provides an elegant transition between mouldings and door jambs, adding visual interest and texture.

Shoe moulding is typically made of flexible wood such as pine, oak, maple or cherry, and comes in a variety of sizes, shapes and profiles. It is often used to break up transitions between two trim pieces, eliminating the need for multiple trim pieces, and creating an elegant, seamless transition.

Shoe moulding also draws attention away from joint lines, adding visual consistency and providing a smooth, polished look. It can also be used alone or in combination with other moulding pieces to create a unique look and feel to your home.