If your toilet paper holder is loose or broken, fixing it may be simpler than you think. To start, you’ll probably have to remove the old holder so that you can access the bolts and surrounding area.
To do this, take a screwdriver and loosen the screw holding the holder onto the wall. Be careful not to pull so hard that the screw comes out of the wall. Once you have the old holder off, it’s time to install the new one.
Some toilet paper holders simply attach to the wall with two screws and the toilet paper holder part slides over them. If your holder is one of these, twist off the old holder part and attach the new one.
To secure it to the wall, take two screws (provided with the new holder) and twist them into the pre-drilled holes. Make sure they are securely fastened to the wall. If you’re installing a more complex toilet paper holder, you may have to use a drill to make holes in the wall and then secure it with screws.
Make sure to read the instructions that come with your new holder and follow them carefully. After securing it to the wall, you can test the holder by sliding the toilet paper roll over the holder part to make sure it is firmly attached.
Are toilet paper holders a standard size?
No, toilet paper holders are not a standard size. Toilet paper holders come in a range of sizes and designs, from single-roll holders that are installed directly to the wall, to multi-roll dispensers, to freestanding holders.
The length of toilet paper holders ranges anywhere from 6 inches to 30 inches. Additionally, the size of the roll that fits into the holder can range from a standard single-ply tiny roll to a larger double-ply roll.
As a result, it is important to pay attention to the size of the rolls you buy in relation to the size of the toilet paper holders so you can be sure the holder and roll are compatible.
Where should a toilet paper holder be mounted?
The ideal height for installing a toilet paper holder is 26 to 30 inches from the floor to the center of the holder. When mounting the holder, be sure to locate it a minimum of 19 inches from the back wall of the toilet.
Additionally, it should be mounted on a wall that is sturdy enough to support the weight of the roll, usually about one pound. It is also important to check the manufacturer’s instructions for placement requirements, as some designs may require longer or shorter distances.
Finally, it is important to leave enough room in front of the holder for the user to be able to access the toilet paper easily.
What side does toilet roll holder go on?
Typically, a toilet roll holder is installed on the wall directly to the side of the toilet, on the side closest to the door. This will provide convenient access to the toilet paper and make it easy to replace the roll.
When you are installing the holder, it is important to make sure it is installed at the correct height for comfortable use. If you plan to install it near a sink, be sure that there is enough clearance so that the holder is not in the way when using the sink.
Additionally, it is important to secure the holder properly so it will not come loose and can support the weight of the roll.
What can I do with extra toilet paper?
There are lots of things you can do with extra toilet paper! One great way to use it is to make crafts. Paper mache, papier mache eggs, paper snowflakes, or other homemade decorations make great activities for kids and adults alike.
Toilet paper tubes can also be painted, decorated, and used to create miniature houses, cars, dolls, or other imaginative objects. You can also cut the TP sheets into strips and use them to make beautiful and intricate decorations for holidays or special events.
In addition, TP can also be repurposed for practical use around the house. If you need to pack fragile items for a move, for example, toilet paper makes for a great cushioning material. You can also stuff it into the toes of shoes that are too big, use it as a dust or pet hair remover, or even wrap breakable items such as light bulbs or vases.
Finally, don’t forget that extra TP can also be donated to local homeless shelters, food banks, or other causes that could use it!
Where should toilet paper be placed in a bathroom?
Ideally, toilet paper should be placed near the toilet, within arms’ reach of the user. This ensures easy, convenient access to the toilet paper, regardless of seating position. The exact placement of the toilet paper will depend on the layout of the bathroom, but the general rule of thumb is that the toilet paper should be mounted or placed within six feet of the toilet.
If possible, mount the toilet paper holder directly to the wall near the toilet, as this prevents the need for storage space and maximizes the available surface area in the bathroom. You can also mount a toilet paper holder near the towel rod or other convenient location.
Additionally, if space permits, it is helpful to have a spare roll of toilet paper available for times when the existing roll is finished.
Can toilet paper holder go behind toilet?
Yes, many toilet paper holders can go behind a toilet. It is especially helpful for those with small bathrooms who need the extra space. Generally, a toilet paper holder installation behind the toilet is fairly simple, since the holder just needs to be affixed securely to the wall.
Most toilet paper holders come with the necessary mounting hardware, so all that is needed is an appropriate drill or screwdriver to install it. Pre-drilling holes can make the installation much easier.
Just make sure that the mounting surface is solid, flat, and dry in order to secure the holder properly. However, it is important to keep in mind that the holder must not be positioned so far back that it is too difficult for users to reach.
Can I store toilet paper in garage?
Yes, you can store toilet paper in the garage if you have the space to do so. Make sure, however, that the toilet paper is stored properly and protected from elements like moisture, heat and pests. To do this, place the toilet paper in a sealed, plastic container or garbage bin with a lid to ensure it stays clean and dry.
If you are able to, put the container in a cool, dry area of the garage. Additionally, you may want to keep the toilet paper away from chemicals, paint, or other items that could potentially damage it or affect its absorbency.
Are all toilet paper squares the same size?
No, not all toilet paper squares are the same size. The size of a toilet paper square will vary depending on the type of toilet paper and the brand producing it; some are meant to be larger or smaller than others.
Generally, the sheets of toilet paper are between 4-5 inches long and 4-5 inches wide, though this is by no means a standardized size. Toilet paper rolls may also have slightly differing dimensions, typically between 4-5 inches in width; the length of the roll varies depending upon the number of square sheets of paper in the roll.
Additionally, many brands provide a variety of sheet sizes, such as jumbo or mini rolls, so it’s important to keep this in mind when buying toilet paper for your home.
What is the thing that holds toilet paper called?
The thing that holds toilet paper is called a toilet paper holder. Generally, these holders come in a variety of shapes, sizes, and styles, such as wall mount or free-standing models. Wall mount models are typically an L-shaped bar that is screwed into the wall, and have one or two arms to hold one or two toilet paper rolls.
Free-standing models come in styles such as a simple wooden pole with an arm to secure the roll, or a basket-style that is placed on the floor and has a door to hold the roll. Toilet paper holders usually have a place for spares, so you can easily store and change out your rolls.
