Skip to Content

How do you fold a kid picnic table?

Folding a kid picnic table is a simple process that only requires a few steps:

1. Start by flipping the table over so that the top surface is facing downwards.

2. Depending on the model, there will either be legs that can fold in, or you may need to release some pins at the joints between the legs and table to allow them to move. Make sure that all the legs are lowered to the ground.

3. Once all the legs and table top are collapsed, carefully lift the table and fold it in the middle so that both halves are overlapping. This should result in the table being significantly shorter.

4. Finally, secure the table with a latch or a strap to keep it folded. Most kid picnic tables will come with hardware for this purpose, but if not you can use some bungee cords to keep it folded together.

And there you have it – a kid picnic table ready to go with you wherever you need it. With just a few easy steps, your kid picnic table will be set up and ready for some memories and outdoor fun in no time!.

How do you get water out of a Little Tikes picnic table?

To get water out of a Little Tikes picnic table, you will need a few supplies. First, gather a bucket, a sponge, a towel, and a vacuum cleaner. Start by using the sponge to soak up as much of the water as you can.

Make sure to wring out the sponge into the bucket periodically so that the excess water can be thrown away. Once you’ve removed as much of the water as possible, take a towel and dry off the surface of the picnic table.

If the table is in an area with direct sunlight, allow the table to air-dry for a few hours. Otherwise, you can use a blow dryer to speed up the drying process. Lastly, use the vacuum cleaner to remove any remaining water droplets that weren’t soaked up with the sponge.

Once you’ve vacuumed the water away, make sure to clean the picnic table with a mild soap and warm water to eliminate any soap residue left behind.

Can you paint a little tikes picnic table?

Yes, you can definitely paint a Little Tikes picnic table. First, you need to thoroughly clean the table with soapy water and a sponge. Make sure the table is completely dry before proceeding. After that, you should lightly sand the surface of the plastic table with medium-grit sandpaper.

This will give the paint a good chance to stick to the surface properly. Next, you’ll need to apply at least two coats of primer to the surface, allowing the first coat to dry before applying the second.

Finally, choose the paint you want to use and apply two to three coats of it, waiting for each coat to dry before applying the next one. You can also apply a spray-on sealant after the paint has dried completely to make the paint job last longer.

Do Little Tikes playhouses come apart?

Yes, most Little Tikes playhouses come apart for easy storage and portability. Each playhouse is designed differently and comes with specific assembly instructions. Some require a screwdriver and others simply pop apart.

Little Tikes playhouses are often made from plastic and metal parts, making them easy to take apart and put back together. For more specific instructions on taking apart a particular model, it’s best to refer to the manufacturer’s instructions that come with the playhouse.

How do you upcycle a plastic playhouse?

Upcycling a plastic playhouse is a great way to give it new life and to keep it out of the landfill. Here are some ways to upcycle an old plastic playhouse:

1. Use it as a fun and cheerful planter – it is the perfect size for large flowerpots and easy to clean and move around the garden.

2. Use it as an outdoor toy box – repurpose it as an outdoor toy box and cover it with fabric to give it a colourful and modern look.

3. Place it indoors – use it as a room divider with fabric draped over it or use it to create a reading nook for your kids.

4. Paint it – use chalkboard paint or even spray paint to transform it into a fun piece of art.

5. Turn it into a workshop corner or studio – fill it with useful tools or materials and turn it into a studio for arts and crafts.

6. Make it a pet home – great for larger hamsters, guinea pigs, and other small animals.

These are just a few of the ways to upcycle and repurpose an old plastic playhouse. With a little creativity and imagination, you can make it into something new and exciting!

How do you make a plastic slide slippery again?

Making a plastic slide slippery again can be accomplished using various methods. The most common method is to use a commercial slide lubricant such as WD-40 or silicone lubricant. Spray the lubricant on the slide and use a soft cloth to wipe it on evenly.

Ensure you cover the entire surface of the slide. Keep in mind that WD-40 or silicone lubricant can leave residue and build-up on the surface, so you may want to apply and clean them off every few weeks or months.

Another option is to use a mixture of liquid fabric softener and water. Make a ratio of 2 parts liquid fabric softener to 1 part water and mix the solution together in a bucket. Soak a cloth, like an old rag or cloth, in the mixture and wring it out evenly.

Wipe this cloth over the entire surface of the slide. This will remove any dirt and grime and make the slide slippery again.

You can also use cooking oil or baby oil to make the slide slippery again. Just take a small amount of oil and use a soft cloth to apply it all over the slide. Rub it on evenly and ensure to cover the entire surface.

After it has been applied, let it sit for a few minutes then wipe it off with an old cloth. The slide should be much more slippery.

After following any of these methods, you can use extra water to rinse off the slide if you would like.

How do you clean outdoor playhouse plastic?

Cleaning outdoor playhouse plastic can be a simple process, depending on the extent of the dirt or grime. Start by wiping the plastic down with a damp cloth and some mild dish soap. Daily cleanings, or as needed, should suffice.

For old, stuck-on dirt, you may have to scrub with a sponge with a bit of concentrated dish soap and warm water. After cleaning, let the plastic air dry to avoid watermarks. For tougher grime, like mildew, you may want to mix 1 cup of white vinegar with 1 gallon of warm water and scrub gently, then rinse with a water hose and dry.

A soft bristled brush may be necessary if the dirt and mildew is tough to remove. If the plastic item is made from polyvinyl chloride (PVC), an oil-based cleaner may be needed for tough dirt. Do not use harsh chemical cleaning products, as it may cause discoloration and damage to the plastic.

If in doubt, always refer to the playhouse’s manual.

What kind of paint do you use on Little Tikes toys?

When it comes to painting Little Tikes toys, the best paint to use is a water-based acrylic paint. Water-based acrylic paint is non-toxic, which makes it great for children’s toys. It also has a high-gloss finish, making it both visually appealing and durable.

Additionally, acrylic paint is great for outdoor projects as it is resistant to fading and chipping. It is also easily cleanable with just soap and water. Before painting a Little Tikes toy, make sure to prepare it first by sanding it down and wiping it clean, and then prime and prep the surface with an appropriate primer.

Once primed and prepared, use a high quality artist brush to apply the paint in thin, even layers. Multiple thin coats are better than one thick coat, so wait for the paint to dry in between coats. Finally, once dry, seal the surface with a sealant or varnish for added durability.

Can Little Tikes playground paint?

Yes, Little Tikes offers playground paint that is designed specifically for outdoor playground surfaces. This paint is available in a variety of colors, and it is non-toxic and lead-free. It is also resistant to fading, cracking, and peeling, so it provides long-lasting protection for your playground surfaces.

With Little Tikes playground paint, you can create fun and colorful play areas for your little ones to explore. The paint is also easy to clean up, and it can help resist the growth of mold and mildew, making it ideal for outdoor use.

Can you paint plastic playground equipment?

Yes, you can paint plastic playground equipment to personalize it and enhance its appearance. However, it’s important to properly prepare the plastic surface before painting and use a paint that is specifically designed for this type of material.

To ensure best results, it is important to follow these steps:

1. Clean the plastic surface you want to paint thoroughly. Discard any dirt, dust or debris by using mild detergent and a soft cloth. Allow to dry completely before continuing.

2. Lightly sand the plastic surface with fine-grit sandpaper to smooth out any rough patches. This also helps the paint adhere better to the plastic.

3. Apply a primer specifically designed for plastic surfaces. This helps create a smooth, even base for the paint.

4. Once the primer has dried, apply a coat of acrylic paint designed for plastic. Follow the directions on the packaging for the best results.

5. If desired, you can apply a second clear coat to seal the paint and protect it from fading and scratches.

6. Allow the paint to dry completely before playing on the equipment. This could take several hours or even an entire day, depending on the temperatures and humidity levels.

Following these steps should help you achieve a professional-looking finish that will make your plastic playground equipment look like new again.