Making a homemade closet shelf is a relatively straightforward task. You will need some supplies, such as wood, plywood, screws, a drill, a jigsaw, and a saw. To start, measure the width of your closet and decide the width of each shelf.
Then cut your wood down to the size you need with a saw. Make sure the wood is strong enough to support the weight of items you plan to place on the shelf.
Next, drill pilot holes in the wood for the screws and assemble the shelf pieces into two or three shelves. If you want your shelves to be strong and stable, you can use plywood for the edges. Use the jigsaw to cut the plywood into the correct shape and size and attach it to the frame.
Finally, drill the screws into the frame and secure the shelves.
When you’re done don’t forget to sand the shelf and apply a coat of paint or stain if desired. You may need to affix the shelf to the closet wall if it’s a large shelf. You can do this by securing it with screws into the wall studs.
Once you have your new shelf all set up, you can start organizing your closet!.
How do I add shelves to my closet?
Adding shelves to a closet is a relatively simple process, but the precise method will depend on the type of closet you have and the material of the closet walls.
If your closet is made of drywall and you have basic carpentry/handyman skills, then you can install standard wooden shelves. Start by measuring your closet interior to map out where you want the shelves to go and how big each shelf should be.
You’ll need a saw and a drill to cut and mount the boards to the wall studs. Start by drilling pilot holes and countersink screws into the wall studs, then secure the boards to the wall with brackets.
To finish, caulk and paint any exposed areas.
Alternatively, if your closet is made of metal, like those found in many apartment buildings, you’ll need to get specialty shelves–or have them custom made–that attach with anchors or clamps. Start by measuring the interior of the closet, then shop around for shelves that will fit.
Install the anchors first (according to the manufacturer’s instructions). Then, adjust and affix the shelves to the anchors and wall studs as necessary. Remember to use counter-sink screws.
No matter what type of shelves you’re using, be sure to use the appropriate fasteners to ensure that the shelves are securely mounted to the wall. And you can always hire a carpenter if you need help with installation.
What can I use for cheap shelves?
For cheap shelves, you have a few options. Thrift stores are a great resource for affordable shelving units and bookcases. Check online for used furniture stores in your area that might have shelves available at discounted prices.
If you’re handy, you could make your own shelves from wood or other materials, such as metal pipe. Head to your local hardware store and pick up some supplies. You can also find some inexpensive shelving options at discount stores like Walmart or major retailers like Target or IKEA.
Shop around to find the best deals. Additionally, you can explore upcycling options by searching online for ideas on how to repurpose old furniture or other found materials into shelves.
How can I make my closet shelves look good?
One way to make your closet shelves look good is to start with a clean slate. Remove everything from them and wipe them down before you start to plan and design the space. Then, look at what items you have and categorize them.
For example, group items by type such as hanging clothes, folded sweaters, jeans, activewear, etc. Figure out what type of storage pieces you will need to store these items and purchase them if needed.
Baskets are great for folded clothes, sneakers, jewelry, and other small items. Additional shelf dividers can help you maximize the storage space. Then, start to style the closet with decorative objects like artwork, picture frames, or accessories.
Make sure to use the vertical space and think about ways to create zones for seasonal items or items you use often. Adding in a full-length mirror or a mini chandelier can also help make the space feel functional, fashionable, and inviting.
How do you build a free standing shelf?
Building a free standing shelf is actually a fairly simple process. The key is to have the right tools and materials and to follow directions carefully. Here are the steps you’ll need to take:
1. Choose the type of shelf you want to build. Shelves come in many different shapes and sizes, so be sure to do your research to make sure your shelf is the correct size for your space.
2. Gather the necessary materials and tools. You will need lumber such as 2x4s, screws and other fasteners, a circular saw, a drill, a level, a tape measure, and any other tools according to the instructions you are following.
3. Cut the lumber to the desired size of your shelf. Measure twice, cut once to make sure your measurements are accurate.
4. Assemble the shelf frame using the wood and fasteners. Take your time and make sure each joint is fitted tightly together.
5. Mount the shelves to the frame. Ensure that the shelves are level when mounting them to the frame.
6. Secure the shelf into place. Use screws or other fasteners to anchor the shelf to the wall. Depending on the size of your shelf, you may need an additional beam to add strength.
7. Add finishings to the shelf. If you’d like to customize your shelf, you can paint or stain the wood to your liking.
By following these steps, you can easily build a sturdy and attractive free-standing shelf. Good luck!
How can I add more storage to my small walk in closet?
Adding more storage to a small walk in closet is definitely not an easy task! However, there are several creative ways to do this. Here are a few ideas:
1. Utilize the vertical space. Hang rods from the ceiling to create additional hanging storage, or add shelves to the walls. Organize items on these shelves by type and use storage bins or baskets to maximize the space.
2. Use hangers. Hangers with multiple clips, shelf hooks, or hangers with pant and skirt holders are great for maximizing storage space.
3. Increase the use of drawers. Consider adding shelves with drawers or purchase a dresser to help store all of your clothing items.
4. Utilize shoe organizers. Storing shoes on shelves or in boxes can create a lot of clutter. Instead invest in a shoe organizer to maximize the space on the floor and save your shoes from getting crushed.
5. Add extra containers. If you’re lacking shelf or hanging space, use wicker or plastic storage containers or bins. This will not only add additional storage, but it can also make items easier to find.
6. Hang a mirror. Not only will this add to the decor of the closet, but it also creates the illusion of space.
Remember to measure your storage spaces before buying any fixtures or containers. This will help you determine what size of items will fit and take advantage of every possible nook and cranny for additional storage. Good luck!.
Good luck!.
How much does it cost to install closet shelves?
The cost of installing closet shelves depends on a variety of factors, including the size of the closet, the materials being used, the complexity of the installation, and the labor involved. For simple DIY installations, the materials themselves typically only cost a few hundred dollars.
For more complex installations using custom shelving, the cost can range anywhere from a few hundred dollars up to several thousand. If you hire a professional, costs will vary depending on the complexity of the job and the labor required, but can range anywhere from a few hundred to several thousand dollars as well.
How do you hang a shelf in a closet without studs?
If you want to hang a shelf in a closet without having to locate and attach it to wall studs, there are some solutions that can help. One is to use an adhesive shelf support system. These support systems typically come with adhesive sticks that attach the shelf’s brackets to the wall surface.
Make sure to wipe down the wall surface with isopropyl alcohol or a degreaser to remove any dirt before attaching the supports, as this will help them to stick better. Also measure and mark the wall accurately so that the shelf is level.
Furthermore, be sure to install the shelf supports so that they will be supporting a suitable portion of the shelf and its load.
Another option is to use wall anchors, which are devices that provide support to a shelf in the absence of a stud. The devices typically include a hollow sleeve, a plug, and a screw. They are inserted into the wall, allowing the weight of the shelf to be supported by the plug and sleeve.
However, wall anchors should only be used if the shelf or object is relatively lightweight.
For larger and heavier objects, it is best to install wall brackets. This type of support will require you to identify and drill into the sturdy wooden structures that are behind the wall boards. Use a stud finder to help you do this.
After drilling, insert wall anchor screws and hang the shelves. Be sure to use appropriate length screws so that when the bracket is securely mounted, the screw points are inside the wall board, not outside.
How do you hang a shelf without putting holes in the wall?
One option to hang a shelf without putting holes in the wall is to use adhesive strips or removable hooks. This method allows you to place the shelf simply by peeling off a backing and sticking the adhesive directly on the wall.
There are numerous types of adhesive strips, hooks, and other wall-mounting solutions available so it pays to shop around and compare different strengths and sizes. Be sure to use an adhesive that’s engineered for your particular wall surface– such as drywall, tile, or concrete.
It’s also wise to select a shelf that’s light enough to be hange safely.
Another option involves using built-in brackets. This is great for heavier shelves, as well as giving the entire assembly a nice, clean look. The downside of this method is that you’ll most likely need to drill holes into the wall.
However, by utilizing built-in brackets, you can easily attach and remove shelves without leaving any visible holes in the wall.
For a third option, floating shelf brackets are a great way to mount a shelf without putting any holes in the wall. This involves installing a vertical support that’s screwed or nailed directly into the wall studs.
This is much sturdier than adhesive strips, and it actually provides additional support for heavier shelves. After installing the vertical bracket, the shelf slips onto the bracket and appears to “float” on its support.
To sum it up, the best approach for hanging a shelf without damaging your wall depends entirely on the shelf’s weight and the type of wall material. Use removable adhesive strips for lightweight items and drywall, move on to built-in brackets for heavier shelves, and utilize floating shelf brackets for additional support.
Are there studs in closet walls?
The answer to this question depends on the type of closet wall in question. If the closet wall is made of drywall, then the answer is typically no, there are not studs in the wall. Drywall is held in place with nails or screws, not studs.
However, if the closet wall is made of wood, then chances are that there are studs present. Wood walls are usually constructed with two parallel studs spaced 16 or 24 inches apart, which support the weight of the wall.
To find the studs, check for screws that are holding the wall together. It’s usually easy to hear the screws when tapped gently with a hammer. You can also try using a stud finder, which is a small hand-held device that can indicate the presence of a stud.
How much weight can you hang on drywall?
The amount of weight you can hang on drywall depends on a few factors, including the type and thickness of the drywall, the number of screws used to hang the item, and the type of fastener used. Generally speaking, a 1/2-inch drywall can hold up to 50 pounds with the proper installation.
If you use 1/2-inch sheetrock, you can hang up to 70 pounds with the right fasteners.
However, it is important to note that these weights are only estimates, and it is important to ensure you use the correct installation methods and enough fasteners to ensure the item is stable and secure.
For instance, when hanging shelves, it is important to use drywall anchors or lag screws to ensure the shelf is securely mounted. For heavy items such as TVs, you should use heavy-duty mounts to make sure the item is firmly attached to the wall.
You should also use additional fasteners or anchors for extra support.
When in doubt, it is best to err on the side of caution and use the higher number of fasteners for heavier items to make sure the item is securely hung.
How far apart are studs in a closet?
The typical spacing between studs in a closet depends largely on the material used to frame the walls and what type of closet is being built. In general, wooden studs are spaced 16” apart, with some revisions depending on climate and other factors, but metal studs are typically spaced 24” apart.
Certain closets may need additional supports, so it may be necessary to increase the stud spacing in these cases. Typically, closets require fewer vertical supports than a living space with load bearing walls, so the studs may be spaced farther apart than in other rooms.
It’s best to consult a contractor or building codes in your area to determine the best spacing for your closet.
What if I can’t find a stud in the wall?
If you are unable to locate a stud in the wall, there are a few options for hanging items. One option is to use wall anchors, which help to disperse any pressure applied upon the screws. To secure wall anchors properly, first you should use a drill to create a hole in the wall slightly larger than the anchor itself.
Then insert the anchor into the hole, hammering it until it’s flush with the wall. Finish by securing the object with a screw, which you can then cover with a wall plug for an aesthetically pleasing look.
Alternatively, you can look for a solid backing such as within the cavity of an existing unit like a cupboard, or else use adhesive hooks or strips. If hanging a heavy or valuable item, it’s best to always use a solid backing.
What can I use instead of a stud finder?
If you don’t have a stud finder, there are other ways you can locate wall studs. One of the most common ways is to knock on the wall and listen for a slightly different sound. This method works best in thin walls and is not as reliable on thicker walls with insulation.
You can also use a magnetic wand on the wall that responds when it passes over nails or screws. Finally, you can use a specialized detection device such as an electronic tic tac toe game that you move around on the wall searching for studs.
These devices also can detect electrical wires which is helpful.
How wide is a standard closet shelf?
A standard closet shelf can vary depending on the closet size and type. Generally, shelf depth ranges from 12 to 24 inches and shelf widths vary from 24 to 48 inches. The width of a shelf is often determined by the size of the items it needs to store, such as shoes and folded clothing.
Shelves can overlap so that multiple items can fit in one row. Additionally, closet containers and drawers can also be used for storage.
What is standard shelf depth?
The standard shelf depth is typically between 10 and 16 inches, although this can vary depending on the item being stored. The shelf depth should be determined based on the size of the item being stored and the amount of space needed for it.
For example, heavier items such as books typically need a deeper shelf to ensure they don’t tip over, while lighter items generally don’t require as much space. Additionally, shelves should be placed in locations that make them easily accessible, such as near hallways or walkways.
It’s also important to make sure the shelf isn’t too close to the ceiling, as this risks making it difficult to reach the items stored on it. In all, the standard shelf depth will depend greatly on the items being stored and the space available in the room.
How tall should a shelf be?
The height of a shelf depends on its purpose, the size of the items it will store, the ceiling height, and whether it will be used as a standalone unit or part of a system. Generally, shelving should not exceed eight feet in height unless it is in a commercial setting such as a library or a warehouse.
For general household purposes, shelves should be placed at least a foot away from the ceiling, with recommended heights ranging from three and a half to six feet. When installing shelves around the perimeter of the room, less height is needed due to the slanted angle – the top shelf can be as low as three feet, and the bottom shelf should not go past two feet two inches.
When constructing a built-in system, heights should be adjusted accordingly to ensure the final product is both safe and aesthetically pleasing.
What is the average depth of a wall shelf?
The average depth of a wall shelf depends on a variety of factors, such as the spatial constraints of the room, the size of the items to be stored, and the desired effect once mounted. Typical wall shelves have a depth ranging from 6 to 10 inches, but some can be much deeper if necessary.
Commonly-available wall shelves typically measure between 8 and 12 inches in depth. If practical considerations prevent a deeper shelf from being mounted, shelving units with open backs, pegboards, and creative storage solutions may provide a better fit.
In general, the depth of a shelf should be determined by the size of items to be stored, with a minimum depth of 8 inches to hold books and a greater depth for heavier items.
