Skip to Content

How do you make a Roman blind without a kit?

Making a Roman blind without a kit requires a few simple supplies like fabric, blackout lining, dowling, drapery weights and rings, and some basic sewing supplies (such as a sewing machine and thread).

Begin by measuring the width and length of your window and choosing the fabric you would like to use (and a blackout liner if required). Cut the fabric, blackout liner and batting (if using) to the correct sizes and sew the blackout liner to the wrong side of the fabric using a sewing machine.

If using a heavier fabric, add batting, and then sew the fabric right side together. Cut doweling rods to the right length to fit the top of the window, slide them through the fabric, and sew a pocket on each side of the fabric to loosely hold the doweling.

Next, insert drapery weights at the bottom of the fabric and sew them in place. Finally, attach rings and cord to the top of the fabric and hang it on the dowling ratchets. For a more detailed guide, check out a few of the many instructional videos available online.

How do you string roman shades?

Stringing Roman shades is a fairly straightforward process. It involves looping nylon cord or nylon tape through the top of the shade’s backside and through the holes of the endpieces. The end piece has brackets or metal grommets that provide the anchor points for the cord or tape.

You will need a needle, nails or “L” brackets, and a ladder and/or screwdriver depending upon the height of your window.

First, you need to measure the length of the cord or tape you need. It should be four times the length of the width of the shade. Then, you need to find the top bar of the blind. This is where the endpieces are attached, so you will loop the cord or tape through them.

For more secure mounting, you can use nails or “L” brackets and drill the bracket into the wall or frame.

Once the endpiece is in place, you need to thread the cord or tape through the back of the shade. Do this one shade at a time. Thread the top of the cord or tape through the hole on the back of the blind.

Next, loop it through the top bar of the shade and through the endpiece bracket. Now, thread the other end through the top bar and the hole at the other end of the shade. This will ensure it is secure.

Repeat this process for each shade. Finally, tie the ends together securely and trim off the excess cord or tape. All the shades should now be secure and in place.

What is a hobbled Roman shade?

A hobbled Roman shade is a type of window covering that features flat, pleated fabric mounted onto a hidden track with an attached control device. When deployed, the shade will create softly curved folds while obstructing light, providing privacy, and helping to insulate the interior.

In addition to the curved aesthetic, these shades can be customized according to the width of the window, the fabric chosen, and the user’s preferred degree of openness. As a window treatment, these shades can also be used to accentuate any existing home décor.

When compared to traditional blinds and drapes, hobbled Roman shades offer a modern, stylish take on light and privacy control while allowing easy access to draw and adjust the shades as needed.

How much fabric do I need to make a faux Roman shade?

To accurately determine how much fabric you need to make a faux Roman shade, you need to take several measurements of your window. For a faux Roman shade, your fabric should extend 8-12 inches beyond the top and sides of the window, and 2 inches below the bottom.

First measure the height of your window and add 10-14 inches (depending on how long you want the shade). Then measure the width of your window at the top and bottom, remembering to add the 8-12 inches.

Finally, measure the width of your side-stacking area in the middle, and add 4-6 inches. Add all the measurements together and this will give you the total length of your fabric. To calculate the width of your fabric, measure the window height and add the 2 inches for the bottom, and multiply the result by 2.

The result is the width of your fabric for a one-way draw faux Roman shade. If you’re making a two-way draw faux Roman shade, double the width.

For example:

Window height = 60 inches

Window width (top) = 36 inches

Window width (bottom) = 24 inches

Stacking area width = 20 inches

Total fabric length = (60 + 14) + (36 + 12) + (24 + 12) + (20 + 6) = 162 inches

Fabric width = (60 + 2) * 2 = 132 inches

Therefore, you will need approximately 162 inches of fabric that is 132 inches wide to make a one-way draw faux Roman shade.

Can I make my own Roman shades?

Yes, you can make your own Roman shades! The process is relatively straightforward, even for those without a lot of experience in crafting. Here are some steps you can take to make your own Roman shades:

1. Gather the materials you will need. You will require fabric, a wood board, window shade clips, mounting brackets, and some craft glue.

2. Measure the dimensions of your window, and determine the dimensions of the wood board you need. Cut the wood board to size, then attach the window shade clips to the back of the board.

3. Cut your fabric to the same size as the wood board. Attach the fabric to the board with craft glue and let it dry.

4. Attach the mounting brackets to the sides of your window frame, with the short sides of the brackets facing outward. Then, mount the board on top of the brackets.

5. To raise and lower your shades, attach a pull cord to one end of the board, and tie the cord onto a hook on the opposite side. Now you can pull on the cord to make your Roman shades go up and down.

With these simple steps, you can make your own Roman shades for your windows in no time.

Is it easy to make Roman blinds?

Making Roman blinds can be an easy process, depending on the type of blinds you are making and the complexity of the design. The most common type of Roman blind is the flat Roman blind which is generally easier to make than other styles.

If you are constructing a single blind, you will need to measure the window accurately, cut the fabric pieces to the proper size, sew the seams together and create the hem. Assembling the Roman Blind requires the use of headrails, brackets, a cleat, rod pockets, rings, and cord locks.

With the right tools and supplies, it is possible to make a Roman blind without too much difficulty. For specifics on assembling the blind, there are many online tutorials available.

Can you make Roman blinds from curtains?

Yes, you can make Roman blinds from curtains. This project involves taking curtains and re-purposing them into Roman blinds that you can hang at your windows. To do this, you will need to measure the desired window length and width, then use this as a pattern to cut the fabric of the curtains.

Once the fabric is cut, you will need to hem the edges for a neater finish. Next, you will need to attach battens to the back side of the curtains so that when you pull the blinds up, the fabric will create a fold.

Finally, you will need to attach the battens to a track or rod, and then hang the blind at the window. It can be a slightly time-consuming process, but it is also rewarding when you can re-purpose something to give your windows a unique look.

How do I make my own blinds?

Making your own custom window blinds can be a rewarding and cost-effective DIY project. Here are the basic steps you’ll need to follow in order to make your own custom blinds:

1. Measure your window: Before you begin crafting your blinds, you’ll need to take accurate measurements of your window – this will be key to creating blinds that fit correctly and look great. Measure the width and height of both the inside and outside of the window frame, and also the width and height of the window opening.

2. Purchase the materials: Once you have your measurements, you’ll need to buy all the materials you’ll need for your project. You’ll want to select durable material for your blinds and pick a color that works with the rest of your home decor.

You’ll also need a type of headrail, the components that attach the blinds to the window frame, as well as cords and wand, the hardware that will be used to open and close the blinds.

3. Cut the material: You’ll need to cut the pieces of material in the correct sizes for your window and headrail. Measure carefully and use a ruler and a sharp blade to ensure you get a precise cut every time.

4. Install the headrail: Attach the prepared material to the headrail and make sure it is secure and lined up correctly. Make sure the cords and wand are properly installed in the headrail and that all pieces have been connected securely.

5. Heat Seal the Edges: Finally, you’ll need to heat seal the edges of your blinds to finish them and make them look professional. You can do this with an iron or a heat sealing machine. Just be sure to follow the directions on the particular machine you have so you can achieve the best results.

These are the basic steps to making your own custom window blinds. If you follow these steps and are patient, you can create blinds that not only look great, but also fit perfectly in your window frames.

What do I need to make a roman blind?

If you want to make a roman blind, you’ll need the following materials: lightweight fabric, such as cotton, linen, or a synthetic fabric; fabric tape measure; sewing pins; sewing machine; scissors; iron and ironing board; cording; cord cleats and cleat hook; cord locks; dowel; drapery weights; drapery hooks; drapery pleaters; hook and loop tape; bulky clip-on rings; a plastic washer and insert; sewing thread and a tape measure.

You’ll also need a few materials for the installation, such as a wooden blind bracket, a nail, and a screwdriver.

Depending on the fabric and design you choose, you may also need a plastic or metal header, battens, and a coordinating blind bottom hem edge. If you’re using blackout fabric, you’ll need blackout back tape or hem tape too.

To make your roman blind, you’ll need to begin by cutting your fabric and applying pleats. Then, attach the rings or pleaters and sew the hooks to the back of the fabric at the top and sides. Attach the cord locks and cleats and install your drapery weights so that the blind drapes evenly.

Finally, use your hook and loop tape to attach the plastic washer and insert to the back of your blind and attach your dowel to the top. Now you’re ready to hang up your roman blind.

What can I use instead of Roman blind rods?

Depending on the look you wish to achieve, there are a number of great alternatives to Roman blind rods. For an even more traditional look, tension poles or tension wires are a great option. These are similar to the rods used for curtain rails but the tensioning mechanism ensures the fabric remains in place without the need for additional fixation systems.

Alternatively, for a more contemporary look you might like to consider using sprung mechanisms. These designs are typically fitted with a pull cord, so when you draw the cord across the fabric, it will naturally bunch up.

If you would like a modern, minimalist feel, you can opt for metal eyelets and a cord that sits behind the fabric. The cord can then be drawn up to hold the fabric in place, for a sleek and seamless look.

Finally, for those interested in a semi-automated solution, you could opt for a motorised system. These are the most high-tech options and will allow you to use a remote or touchpad to open and close the blinds.

Do Roman blinds need rods?

Yes, Roman blinds do need rods in order to hang properly. The rods, also known as pleaters, are attached to the blind at the top and bottom, so that when the blind is raised it creates a pleated/folded effect.

Without the rods, the blind will not hang correctly and will not create the correct aesthetic. The rods can be made from different materials such as metal, plastic, or timber and come in a variety of sizes and colors to match the blinds.

Additionally, the rods must be the correct size and length in order to adequately support the fabric and create the desired effect. Without the correct measurements, the blinds may hang unevenly or at risk of collapsing.

How far apart are rings on a Roman shade?

The spacing of Roman shade rings typically depends on the size of the shade and the desired look. In most cases, rings are spaced 5 to 6 inches apart, however in some cases the spacing may be as close as 4 inches or as far apart as 8 inches.

The larger the window or the more weight being applied to the Roman shade, the closer together the rings should be spaced. Additionally, heavier materials like linen require tighter ring spacing as well.

As a general rule, heavier fabrics or larger sizes should have close ring spacing of 4-6 inches and lighter fabrics or smaller windows can have wider ring spacing of up to 8 inches.