Making an ottoman out of an old table is a great way to recycle and repurpose furniture – it also makes a stylish statement. To make an ottoman out of a table, you’ll need the following supplies:
-Table of your choice
-Fabric
-Stapler
-Upholstery foam
-Quilt batting
-Optional: tufting needles, washers, and twine, for tufting the top of the ottoman
Step 1: Measure the dimensions of the table and cut the foam and batting to the same size.
Step 2: Attach the foam to the top of the table with a staple gun. Make sure the foam is cut to the same size as the table and tuck in any excess fabric so that the surface of the table is smooth.
Step 3: Cut the fabric to fit over the top of the table and staple it in place. Make sure there are no gaps or bunches in the fabric.
Step 4: Optionally, you can add tufting to the top of the ottoman by using tufting needles and twine to anchor the fabric in the center of the ottoman. You’ll need washers to keep the twine in place as you loop it through the fabric and ottoman surface.
Step 5: Once you’ve finished upholstering the ottoman, turn it over and enjoy your finished project!
How do you make a simple ottoman?
Making a simple ottoman is relatively easy and requires minimal tools and materials. You will need a piece of foam, fabric, batting, four legs for the ottoman, basic sewing supplies and a staple gun.
Step 1: Begin by measuring and cutting your foam to the desired size of your ottoman. Step 2: Wrap the foam with batting, being careful to cover all sides. Step 3: Measure and cut the fabric to the desired size of your ottoman.
Add 3-4 inches of extra fabric around all sides. Step 4: Place the fabric over the foam, and pull it tightly to ensure a snug fit. Step 5: Secure the fabric in place with staples. Step 6: Optional, if desired, add decorative accents such as buttons, tassels, or trim.
Step 7: Secure the four legs of the ottoman to each corner. Step 8: And you’re done! You have now made a simple ottoman.
How do you sew a coffee table into a cushion?
Sewing a coffee table into a cushion requires a few basic supplies and some skill in sewing and fabric selection. First, choose a durable yet comfortable fabric for the cushion. Consider not only the style, but also the wear and tear of the fabric in an area that will be constantly sitting on and walking around.
Then, measure the size for the cushion and cut out the fabric to the desired size. Next, sew the fabric into a pillow shape, making sure that the seams are sewn together neatly and securely. Finally, place the cushion cover over the coffee table and sew it onto the table using a sturdy thread and needle.
Make sure to sew securely around the table’s edges and consider adding a few extra stitches in high-traffic areas. Once finished, your new cushion is ready for use!.
What is the fabric for an ottoman?
The fabric for an ottoman can vary widely, depending on the type of ottoman and the overall aesthetic desired. Many ottomans are available in either leather or fabric upholstery. Leather is a great option for modern styled furniture or a more classic, traditional look.
It is also quite durable and can look quite luxurious. Fabric upholstery is a great option for those looking to create a cozy, inviting atmosphere. It is available in a variety of colors and textures, allowing for greater versatility, and comes in both light and heavy weights to accommodate different budget levels.
Some of the popular fabric options for ottomans include chenille, velvet, twill, and canvas. For example, chenille is a luxurious and soft fabric that can bring texture and pattern to a room. Velvet is also a popular option and has a classic, timeless look.
Twill is a durable and versatile fabric that is great for any type of living space. Finally, canvas is a good option for those looking for an outdoor ottoman due to its water-resistant quality.
How many yards of fabric do I need to cover an ottoman?
The amount of fabric you will need to cover an ottoman will depend on the size and shape of the ottoman, as well as the fabric width you will be using.
For a square ottoman, you will need enough fabric to cover four sides plus the top and bottom of the piece. To calculate how much fabric is needed for the four sides and top and bottom, first measure the length, width, and height of the ottoman.
To cover each side, you will need to multiply the length by the height and add a hem allowance of ½ inch to each measurement. To cover the top and bottom, you will need the length and width multiplied together with the same 1/2 inch hem allowance.
Once those measurements are calculated, multiply those numbers by the amount of fabric width you will be using. For a 54-inch wide fabric, multiple the ottoman measurements by 0.96 (which equals 48-inches) to determine how much fabric you will need to purchase.
The end result will be that you need to purchase a certain number of yards of fabric to have enough material to cover the ottoman.
What can I do with an old coffee table?
An old coffee table can offer plenty of possibilities for reuse, upcycling, and repurposing! You could easily transform it into something completely new and different from it’s original form. Consider refinishing the wood and adding a new glossy topcoat, so it looks as good as new! You could also stain the wood a different colour or paint it a vibrant hue.
If it’s a little unsteady, you could add a piece of wood underneath to reinforce the legs.
For those with a creative streak, you could get even more creative and use your old coffee table as the base for a new piece of furniture. For example, you could convert it into a bench, an ottoman, a daybed, or even a tufted headboard.
A coffee table could also become the bottom shelf of a unique display. You could arrange branches, books, mirrors and other decorations on top for a one-of-a-kind piece! You could even use the coffee table as a chest of drawers or add a drawer or two for extra storage.
Can you use Mod Podge on coffee table?
Yes, you can use Mod Podge on a coffee table. This type of craft glue is a great option for creating a durable and attractive finish that will protect your table from scratches and general wear and tear.
For best results, start by cleaning the table thoroughly and sanding it down so that the Mod Podge will properly stick. Once the table is clean and dry, apply a thin coat of Mod Podge and use a soft brush to distribute it evenly.
Allow it to dry for at least an hour, then add a few more coats as needed and allow time for each coat to dry before adding the next. When finished, you can seal the surface with a layer of clear wax or polyurethane to give it a glossy look and create a protective barrier.
What glue do you need for decoupage?
For decoupage, you need to use a special type of glue that is specifically designed for the craft of decoupage. This type of glue is referred to as Mod Podge, and it is a water-based sealer, glue, and finish that comes in either a matte or a glossy finish.
Mod Podge is typically used to glue paper and fabric on a variety of surfaces such as wood, metal, glass, and plastic. In addition to this, Mod Podge can also be used to create a waterproof and durable finish that prevents chipping, fading, and cracking over time.
To use Mod Podge for decoupage, you need to apply a thin layer of the glue with a brush and let it dry for about 15 minutes until it is clear. Once the glue is dry, you can then add an additional layer of glue as a sealant.
After all of the layers of glue have been applied and dried, the item can then be painted, stained, or decorated with a variety of items such as ribbons, fabric, and paper.
How do you seal decoupage on furniture?
To properly seal a decoupage project on furniture, you should first use a foam brush or a cotton cloth to apply a thin, even layer of white craft glue over the entire project, making sure to get into all of the creases and cracks.
Let the glue dry, then sand the entire piece lightly with fine-grit sandpaper to smooth down any ridges or bubbles. Apply a second, thin layer of the glue and let it dry. Once the glue is fully dry, use a foam brush to apply a thin, even layer of acrylic sealer over the entire project.
Let the sealer dry completely, then sand the piece again with fine-grit sandpaper, wiping away any dust. Finish with a final coat of acrylic sealer. Once the sealer is fully dry, your decoupage project will be sealed and protected.
