Tie back curtain cords are an ideal way to keep curtains back and provide a window with a neat and tidy appearance. They are easy to make and can be customized to the look of the room in which they are placed.
The first step in making tie back curtain cords is to measure the curtains. Measure from the edge of the window to the middle of the curtain and write this measurement down. Then measure the length of the cord that is desired for the curtain tie back, usually around four feet.
Cut the cord to this length.
The next step is to attach the cord to the back of the curtain. Start at the mid-point of the curtain where it meets the window frame, and tie an overhand knot in the cord. Secure the knot with craft glue or hot glue gun.
Next, use a needle and thread to attach the cord to the top of the curtain. Take the cord at the top of the curtain, pull it taut and pass it through the needle with the thread to create a loop. Wrap the cord around the back of the curtain.
Pull the thread taut and pass it through the needle back down to the starting point. Tie a secure knot and leave the ends of the thread long.
Next, pass the ends of the thread through the needle and back up to the top of the curtain. Wrap the cord around the back of the curtain and pull the thread taut. Tie a knot and trim any excess thread.
Secure the bottom of the cord in the same way. Create another loop, passing the cord through the needle and thread. Wrap the cord around the back of the curtain and pull the thread taut. Tie a knot and trim any excess thread.
Now the tie back curtains are complete! Place the tie back on the window frame, tucking the ends of the cord behind the window frame. Adjust the cord to the desired height. Adjust the curtain length if needed.
Enjoy the look of the perfectly made tie back curtains!.
Can you use ribbon for curtain tie backs?
Yes, you can use ribbon for curtain tie backs. It is a simple, inexpensive, and decorative way to keep curtains from blowing around in the wind or when open and closed. It’s easy to make your own tiebacks with ribbon.
First, you’ll need to measure the length of ribbon you need to cover the width of the curtains. Cut the ribbon, then use either a sewing machine to stitch the ends together or tie them yourself with a secure knot.
To attach the ribbon to the curtains, use a needle and thread to secure it to the top of the curtains and tie it as desired. Use a strong enough thread that it won’t snap. Another option is to use a curtain tieback hook, available at most home improvement and hardware stores.
Install the hook into the wall a few inches below the top of the curtains and loop the ribbon through the hook. This option is perfect for those who may not want to bother sewing the ribbon together or change the tiebacks frequently.
Do it yourself curtain holdbacks?
Creating your own curtain holdbacks can be a great DIY project that requires minimal tools and materials. To create your own holdbacks, you’ll need 2-3 pieces of fabric (cotton, thick linen, canvas, or even hemp), two pieces of lightweight wire, two pieces of window-grade vinyl, and adhesive.
First, measure the curtain rods and cut the fabric pieces to the length you need for the holdbacks. To add extra durability, fold the edges of fabric over, pin them together, and then sew the edges together.
Next, thread the light wire through the top of the fabric roll and attach each end of the wire to a piece of vinyl. Stick the vinyl onto the back of the holdback. This will attach the holdback to the wall.
Finally, glue the curved ends of each holdback to the top of the curtain rod and your curtains will be held in place. With a bit of patience and DIY spirit, you can easily create a set of stylish and functional curtain holdbacks that will last you many years.
Do magnetic tie backs work?
Yes, magnetic tie backs can be an effective and efficient way to secure curtains or other types of window treatments. Magnetic tie backs use powerful magnetic clips to secure fabric and offer many benefits, such as ease of installation, convenience, and good looks.
Installation is simple, as all that is needed are the magnetic clips, which can easily be attached to the back of the curtains and the wall. The clips do no damage to the walls or fabric and offer an aesthetically pleasing look that is not intrusive or distracting from the décor of the room.
Additionally, these tiebacks can easily be removed and reattached whenever needed. Magnetic tie backs are a great option to consider when looking for a functional and stylish way to keep window treatments in place.
How should curtains look when tied back?
When tied back, curtains should look neat and finished. They should not look messy, as if they have been tied in any old way. One way to ensure they look neat is to tie them back using a coordinating tieback or tieback hooks, and if possible, use tassels or holdbacks to add an extra decorative touch.
The curtains should be tied far enough back such that most of the window is visible, while still allowing the panel behind the curtains to hang comfortably. The curtains should look smooth and tailored, not bulky or lumpy or otherwise misshapen.
If desired, the curtains can be gathered at the sides slightly to create a draped look. Ultimately, the way a curtain looks when tied back is entirely up to personal preferences and tastes, as long as it looks neat and tidy.
Do curtains have to touch the floor?
No, curtains do not have to touch the floor. In fact, there are several popular curtain hanging styles that don’t involve the curtain fabric brushing the floor. If you’re looking to give your room a modern or sophisticated look, consider hanging your curtains a few inches above the floor.
This look is known as “puddling” and it adds an elegant, formal feel to any room. Also, this style is an easy way to make a small space appear larger. You could also opt to hang your curtains a few inches off the floor, so they just lightly graze the top of the floor without touching it.
This look is perfect for rooms with hard flooring, as the slight gap makes it easier to keep the floors clean.
How high should curtain pull backs be?
When deciding the placement of the curtain pull backs, it is important to consider both the style of pull backs used and the design or purpose of the window treatment. Generally, pull backs should be mounted directly to the wall at a height that will be visually appealing, practical, and provide the most functionality.
For standard panels or draperies, the height of pull backs should usually be 2-3 inches below the top of the window treatment so the window opening is not blocked when the curtains are open. Pull backs that are too far down, however, may create an awkward gap in the material, so it is important to make sure there is enough material below the mount to cover the opening when the curtains are closed.
For more formal or ornate window treatments, such as valances, the height of the pull backs should be farther down, usually around the midpoint of the decorative window treatment itself. For larger windows that have multiple panels, it is acceptable to mount pull backs at different heights.
The higher pulls should be further apart and lower pulls can be placed closer together for a more balanced look.
Ultimately, the ideal height for curtain pull backs depends on the size, style, and purpose of the window treatment – making sure the placement is both practical and aesthetically pleasing.
Where should curtain rod brackets be placed?
Curtain rod brackets should be placed around 4-6 inches away from the edges of the window frame. This will provide enough space for the curtains and curtain rods to hang properly. When hanging a curtain rod for short curtains, the brackets should be placed just 4 inches from the window frame, whereas for longer curtains, the brackets can be placed 6 inches away from the frame.
Additionally, when hanging a double curtain rod, the brackets should always be placed as close to the window as possible. When dealing with odd-sized windows, make sure to measure the width of the window and then add the desired inches for the brackets.
It is important to note that when mounting a curtain rod directly overhead of a window, the brackets should be placed anywhere between 6-12 inches away from the frame to account for the curtain panel’s pooling of fabric at the bottom.
What are the things that hold curtains back called?
The things that are used to hold curtains back are known as curtain tiebacks, curtain holdbacks, or drapery holdbacks. Tiebacks are generally decorative, used to tie up curtains from the sides and hold them back from the windows.
They come in a variety of materials and styles, such as rope, fringe, tassels, and fabric, and in a range of colors and sizes. Many tiebacks have additional features such as hooks or clips, so that they can also be used to hang up an extra curtain or fabric drape.
With a variety of styles to choose from, tiebacks can be an easy and affordable way to give a room a fresh look.
What is a curtain header?
A curtain header is the top of a curtain or drape that gets attached to the top of a window or doorway. It forms the top of the panel and provides the structure for the whole curtain. The header can be made of various materials, such as decorative fabric or a more durable material like canvas.
It may also have grommets or buttonholes to help hang the curtain. The header is usually the same fabric as the curtain, but it can also be a contrasting color or design. Depending on the function and the room, you can choose different types of a header, such as a tab top, Pinch Pleat, Goblet Pleat, Pencil Pleat, Inverted Pleat and more.
Some of the curtain headers can be hand wash, while some are dry clean only. When choosing a curtain header, it is important to consider the type of room you are going to use it in, the style and the material.
What are the different types of curtain hooks?
The different types of curtain hooks vary in design and material, from metal to faux leather and plastic. Popular curtain hooks include the S-hook, which is a metal or plastic hoop shaped like an S to hang curtains.
J-hooks are a metal or plastic hook with a bottom prong so they can easily be inserted into a pocket heading or any type of curtain rod. Grommet hooks are metal circles with a clear plastic ring to secure the curtain, and these fit into the metal eyelets of a grommet-style curtain panel.
Café hooks are normally metal and have a loop like shape. These are used to hang lightweight curtains and give an elegant appearance to the window treatments. The pinch pleat hooks have a metal prong attached to a small plastic ring, and they can be inserted at the back of the pinch pleat and are a great way to hang pinch pleat curtains.
Finally, there are the traverse curtain hooks. These metal or plastic hooks are wedge-shaped and fit into slots on traverse or decorative rods. They are used for sliding curtains along the rod.
What are the accessories used for draperies?
Some of the most common accessories include decorative rods, finials, holdbacks, rings, tassels, trims and tiebacks.
Decorative rods come in several styles and sizes and can add charm and character to any room. Finials or end pieces at the ends of the rods can add even more detail to the drapery look. Holdbacks are usually used on to blend in with the drapery fabric and they can be used to tie up the sides during the day and can stay installed during the night.
Rings are used to slide over the rod and attach to the drapery panels. Tassels come in various sizes, colors and shapes, and they can be used as a decorative element to tie together the entire look. Trims or bandings are narrow strips of fabric or lace that are sewn along the sides of the draperies for a touch of class.
Tiebacks can be used to pull the drapery panels away from the window and keep them from covering too much of the window, while still allowing in the natural light.