Skip to Content

How do you measure a Stihl bar?

Measuring a Stihl bar is a fairly simple process and can be done using any standard ruler or measuring tape. To determine the length of your bar, start by measuring along the top (or down the back) of the bar.

Position the ruler at the base of the bar just behind the powerhead and measure to the end of the cutting edge. Make sure that you account for the depth of the cutting teeth, as these will affect the total overall length.

Repeat the process on each side of the bar to make sure that the measurements are consistent. It is also important to measure any sprocket teeth that are present on the bar, as these can slightly increase the overall length.

Once all of the measurements are complete, work out the total length of the bar by averaging the measurements taken on each side.

What is bar length for chainsaw?

The bar length of a chainsaw refers to the length of the saw blade, usually measured in inches. This measurement is determined by the size of the job you are working on. For instance, if you are cutting large logs, you may need a longer bar length.

Conversely, if you’re merely cutting small branches, a shorter bar length will be more suitable.

The size of the bar length is often determined by the size of the chainsaw’s engine. For example, a gas-powered chainsaw with a larger engine will have a longer bar length than a smaller saw, such as an electric chainsaw.

Generally speaking, the length of the bar can vary from 8” and up.

Another factor to consider is the type and size of the chainsaw chain itself. A standard chain might have a bar length ranging from 13-20”, with professional saws typically having lengths of 20” or more.

Regardless of what type of chainsaw you are using, it is important to select the correct bar length in order to achieve the best results. When in doubt, it is usually best to consult a professional to ensure you get the right bar length for your job.

What is a good bar length?

The ideal length of a bar can vary depending on what you are using it for. A typical Olympic weightlifting bar is usually 7 feet long and weighing approximately 20 kg or 44 lbs. Gymnastics bars are typically 4 to 6 feet long.

Powerlifting bars are also typically 7 feet long but weigh close to 45 lbs. Lastly, CrossFit bars are usually 6 or 7 feet long and weigh 15 to 25 kg or 33 to 55 lbs.

In terms of home gym equipment, a 5 or 6 foot length is probably ideal for the average user, as this will provide plenty of room for a variety of barbell exercises such as bench press, squats, deadlifts, etc.

In addition, this length creates a comfortable reach for movements such as rows, curls and presses. If space is limited, however, a shorter bar can still be used for a variety of exercises.

No matter what type of bar you select, it is important to buy one that is high quality and features knurling on the grip area to ensure a more secure hold. It’s also a good idea to consider the type of plates and collars you will be using with the bar, as some barbells are only compatible with specific plate types.

Regardless of the type of bar you choose, it’s important to practice proper safety protocols, such as using collars to secure the weights, and never dropping the bar while loaded with weights.

How are chainsaws measured?

Chainsaws are typically measured based on their bar length, engine power, and weight. The bar length is the length of the bar that the chain runs on, and is proportional to the size of the trees or other objects being cut.

A longer bar will allow a chainsaw to make a longer cut with each stroke, while a shorter bar will be suitable for smaller trees and material. Engine power will determine how quickly the chain can move, and how powerful the cutting motion is.

Corded electric chainsaws will typically be rated in amps or volts, while gas-powered chainsaws are usually rated in cubic centimeters (cc). Finally, the weight of the chainsaw is important for comfortable and safe use.

A chainsaw should feel light enough for the user to be able to handle it with ease, yet heavy enough to provide the necessary cutting power.

How long is a 20 inch chainsaw bar?

A 20 inch chainsaw bar is typically about 44 – 45 inches in total length. This includes both the guide bar and the part of the saw that sticks out in front, which is known as the tip. The guide bar is the metal bar that the chain is attached to and is typically the part of the saw that is measured when discussing bar length.

What do the numbers on a chainsaw bar mean?

The numbers on a chainsaw bar refer to the length of the bar. It is measured from the tip of the nose sprocket to the end of the bar. For example, a 16” chainsaw bar means that it is 16 inches long. The length of the bar will determine what types of materials the chainsaw is capable of cutting.

Longer bars tend to be able to accommodate larger, denser materials such as oak than shorter bars. The chain gauge is also important and the chain should match the size of the bar. If the bar is too short, the chain won’t be able to fit on the bar securely and if it is too large, the chain won’t fit the bar at all.

The numbers will also indicate the size of the drive link and cutter number. The drive link is the section at the base of the chain and the cutter determines the size of the cutting teeth. Lastly, the numbers will also indicate the pitch of the chain which is the distance between three consecutive rivets on the chain.

The pitch needs to be the same size or larger than the bar’s groove.

What size file do you use on a 3/8 chain?

The typical size file used on a 3/8 chain is a 5/32 round file or a 5/32 semi-round file. A 5/32 round file is designed to create a smaller cutting surface and is ideal for sharpening narrow-gauge chains like a 3/8 chain.

A 5/32 semi-round file creates a slightly larger cutting surface and can be used to sharpen both chains with standard pitch and narrow pitch. When using a round file, the filing angle should be between 25 and 30 degrees for the most effective sharpening results.

When using a semi-round file, the filing angle should be limited to 20 degrees or less. It is also important to have a file handle to make filing chain easier and safer.

How do I know my chain size?

In order to know your chain size, you will need to measure the length of your chain. Start by laying the chain on a flat surface and using a ruler to measure the length in millimeters from the center of one pin to the center of the opposite pin.

This will help you determine the total length of your chain, as well as the number of links and the pitch of your chain (the space between two pins). You can then compare your measurements to a chart that shows the different sizes of chains and their lengths in order to identify the size of your chain.

Once you have identified your chain size, you can purchase replacement links at any bike shop or online.

How do I know the size of my chainsaw chain?

The best way to determine the size of your chainsaw chain is by referring to the manufacturer’s manual. Generally, the manual will include a section detailing the different sizes and measurements of your chainsaw chain.

Additionally, you can usually find the size printed on the guide bar or the drive links of the saw chain itself. The size can also be determined by measuring the pitch, the gauge, and the number of drive links.

The pitch is the distance between three rivets divided by two, and can be measured with a ruler. The gauge, or the drive-link depth, is measured with a special tool. The number of drive links can be counted by following the chain around the guide bar.

Once you have determined the size of your chainsaw chain, you can ensure that you purchase the correct size of replacement chain.

What is the difference between .325 and 3/8 chain?

The difference between. 325 and 3/8 chain is the size of the chain links. 325 chain has 3/8” (0.375”) pitch, meaning the distance between three consecutive rivets or with center to center of the first and last rivets divided by two, is 3/8”.

3/8” chain has larger links measuring 1/2” (0.50”) pitch, which is the distance between three consecutive rivets or the center to center of the first and last rivets divided by two. This means that the individual links in 3/8” chain are larger than those of the.

325 chain, leading to greater strength and durability as a whole. Additionally, 3/8” chain also typically has different drivers and sprockets, so one chain cannot be used in a. 325 and 3/8” chain system interchangeably.

What Stihl chain cuts the fastest?

The Stihl Rapid Micro chainsaw chain is specifically designed to cut faster than other Stihl chains. It is made with a small-radius cutting radius and a special carbide material that helps increase the cutting speed.

It is especially useful for cutting through tough or dense materials. Additionally, the Stihl Micro chisel chain is designed for fast and precise cutting, especially for the removal of large chips or for milling out deep, narrow or intricate cuts.

This particular chain is designed with a square-corner, cut design for higher performance and reduced kickback risk.

How do you read a bar number on a chainsaw?

Reading the bar number on a chainsaw requires a few simple steps. First, locate the bar code sticker, which typically is located on the back of the engine, on top of the body, or on the side of the handle.

This code will have a series of numbers that are separated by a dash. The first number usually corresponds to the length of the bar in inches and will read something like “16-44”. This means that the bar length is 16 inches.

The second part of the code, 44 in this example, usually indicates the type of chain that is compatible with the chainsaw. Once the bar number is read, replacing the correct chain is a relatively simple process.

What do Stihl bar numbers mean?

Stihl bar numbers can tell you a great deal about the type of chain saw bar you should use for your job. Generally, the larger the bar number, the longer the guide bar is. The bar number also is sometimes associated with the engine size or the length of the sprockets within the chain saw.

Generally speaking, they range from 8 inches to 64 inches, but like all chainsaw components, the actual sizes may vary depending on the model you are using.

Using the right bar size can make a big difference in the type of job you are doing. A larger bar size is better suited for larger cutting jobs or jobs that require cutting through tougher materials.

Similarly, a smaller bar size is often better for making fine cuts, such as in carving or shaping. So it is important to know the size of the bar you are working with when selecting the chain for your saw.

The guides on Stihl chain saws are also color coded. For example, red codes are for the saws with more aggressive cutting teeth, while white and silver coded bars are for higher cutting speeds and more effective cutting.

This can also help to easily identify the correct chain size.

In summary, Stihl bar numbers are often associated with the dimension and size of the chain saw bar, as well as the engine size, cutting speed, and the cutting teeth of a particular saw. Knowing the right bar size is essential for completing the job correctly and safely.

What’s the fastest cutting chainsaw chain?

The fastest cutting chainsaw chain is the Oregon Power Match chainsaw chain. This chain is designed to offer the fastest possible cutting speed and smoothness when cutting through wood. The Power Match chain features a self-sharpening cutting system that keeps the chain sharp and efficient, as well as a double bumper system that reduces vibrations and kickback.

The sharp cutters and narrow kerf also help to reduce the amount of drag on the motor, resulting in faster cuts. This revolutionary cutting system is available in standard 3/8 inch,. 404 inch and. 325 inch sizes, which makes it suitable for cutting a variety of woods.

Additionally, the Power Match chain comes in various angles, ranging from the standard low profile angle to the widest angle for a maximum cutting efficiency.