Skip to Content

How do you reset a Cricut Maker?

To reset a Cricut Maker, you will need to take the following steps:

1. Unplug the Cricut Maker power cord from the wall or power strip. Wait 30 seconds, and then plug the cord back in.

2. Press and hold down the power button on your Cricut Maker for 10 seconds.

3. Your Cricut Maker will turn off and reset itself. The Cricut Maker logo will appear on the screen, then you can turn the machine back on again.

4. To complete the resetting process, open the Design Space app on your desktop or mobile device. Choose “Reset Cricut Maker” from the menu.

5. You should now be able to use your Cricut Maker as normal.

Why does my Cricut keep stopping while cutting?

There are several possible reasons why your Cricut might be stopping while it is cutting.

First, you may need to adjust the blade depth of your Cricut machine if your blade is too shallow or too deep. A shallow blade will not cut through material, while a deep blade can cause the machine to experience difficulty cutting.

To adjust the blade depth of your Cricut machine, consult the instruction manual that came with your machine for directions.

Second, your Cricut machine may be having difficulty cutting because the material being cut is too thick, too thin, or too complicated for your machine to handle. The Cricut can only handle materials up to a certain thickness.

If the material is any thicker than this, the machine will not be able to cut it properly. If your material is too thin, you may need to adjust the pressure of your Cricut’s rollers to ensure it is applying the right amount of force to the material.

If your design is too detailed, you may need to try to simplify your design or resize it to a smaller size.

Third, you may need to clean the blades of your Cricut machine as they may be dirty or clogged with debris, which can block your machine’s sensors and cause it to stop cutting. In addition, if you are cutting multiple materials, bits of the previous material may be stuck on the blade, which can cause difficulty with cutting your current material.

Finally, you may need to adjust the speed of your Cricut machine if it is cutting too quickly or too slowly, which can result in the machine stalling or stopping during the cutting process. To adjust the speed of your Cricut machine, refer to the instruction manual for directions.

If none of the above suggestions fix your Cricut machine’s issue, you may need to contact the manufacturer for further troubleshooting.

Why is my Cricut Maker not connecting?

If your Cricut Maker is not connecting, there could be several possible causes:

1. The firmware on the Cricut maker may be out of date. Try downloading the latest firmware update and running it on the machine. To do this, simply go to the Cricut website and search for the firmware update package.

Download and install it onto the device following the instructions provided.

2. Make sure that you are using the correct power cord. If you are using the wrong power cord, it can cause the Cricut Maker to not be able to power on or to suffer connection issues. So double-check that you are using the correct cord.

3. The USB connection of the Cricut Maker may be loose or damaged. Check to make sure the USB cable is properly attached and that there is no damage to the cable. If necessary, try flipping the cable around in the port to see if that helps.

You may also want to try replacing the USB cable altogether.

4. Sometimes the Cricut Maker may need to be reset in order to reconnect properly. To do this, press and hold the power button for 10 seconds and the device should restart.

If none of these solutions resolves the issue, it is possible that there could be a hardware issue. In such cases, it would be best to contact Cricut customer service for assistance.

Why won’t my Cricut stay connected to my computer?

There can be a few reasons why your Cricut won’t stay connected to your computer. Here are a few possibilities to consider:

1. Make sure that your Cricut is properly plugged in and configured. Check if your USB cable is properly attached, and that it is connected to the correct port on your computer.

2. Ensure that you have the latest available driver and software on your computer. If the driver isn’t up to date, the Cricut may not be able to properly communicate with your computer.

3. Restart your computer. If the issue persists after checking the driver, try restarting your computer with the Cricut plugged-in.

4. Check your Cricut’s cable and power source. Make sure that the cable is firmly attached to both the Cricut and computer ports, and that power is being received.

5. Make sure nothing else is running on your computer. When you’re running multiple programs or applications on your computer, it can take away resources that your Cricut needs to properly communicate.

6. Try using a different USB port. If you’ve used the same port for some time, it may be worth trying a new port just in case the old one is causing the issue.

Hopefully one of the solutions above can help the connection between your computer and Cricut be reestablished. If the problem persists, it would be best to reach out to Cricut Support for further assistance.

How do I fix Cricut connection error?

If you are experiencing a Cricut connection error you should first try turning off your Cricut machine and unplugging it from the power source. Then, plug the machine back in and turn it back on to ensure it is reset.

Once you have done this, open the Cricut Design Space app on your device and check the connection at the top of the screen.

If the connection is still not working, you should then try to check for a new software update for your machine. To do this, select the Machine icon from the left-hand panel, then select Check for Updates from the LED screen on your Cricut machine.

Follow the instructions to install the update and then try to reconnect your Cricut machine to the app again.

If the connection is still not working, you should manually reset your wireless settings. To do this, download the Cricut Reset Tool and use it to clear any wireless settings that are stored on your Cricut machine.

If this does not work, try reinstalling the Cricut Design Space app on your device.

If the connection still will not work after all of these steps, you may need to call Cricut customer support for further assistance.

How do I reset the Bluetooth on my Cricut maker?

If you need to reset the Bluetooth on your Cricut Maker, there are a few simple steps you can take to do so.

First, turn off your Cricut Maker and power it back on. Then, open the Settings menu and select “Bluetooth”. In the Bluetooth settings menu, select “Reset”. Select “Reset” again and then select “Yes”.

Once the reset is complete, your Cricut Maker should be ready for you to use!.

If you’re still having trouble connecting to Bluetooth, it’s suggested that you try disabling Bluetooth in the Bluetooth settings, power off the maker, and then turn it back on. This will reset the Bluetooth connection, and allow the Cricut Maker to connect properly.

Finally, if you’re still having trouble connecting to Bluetooth, it’s recommended you turn off both devices, and then turn them back on. This should give you a fresh connection and allow for successful Bluetooth connection.

If you continue to experience issues with the Bluetooth connection on your Cricut Maker, contact their customer service team who can help with troubleshooting the issue.

How do I put my Cricut maker in pairing mode?

To put your Cricut Maker in pairing mode, you need to use the universal Smart Card Pen. Start by powering on the Cricut Maker machine, then insert the Universal Smart Card Pen into the machine’s card slot.

Once the Universal Smart Card Pen is inserted, the Cricut Maker will enter pairing mode. You’ll know it’s in pairing mode when the green light on the Universal Pen Card lights up and starts blinking.

You can then use your device, such as a mobile device or computer, to search and locate your Cricut machine. From there, you can pair your Cricut machine and device for use with Cricut Design Space and other supported Cricut software.

Does Cricut deactivated machines?

Yes, Cricut deactivates machines from time to time. When a machine has been deactivated, it will not be able to be used until it has been reactivated. Deactivation of Cricut machines can happen for a few reasons, such as not having the most up-to-date software/firmware, not having an active Cricut Access subscription, or simply due to inactivity (if it hasn’t been used for a certain period of time).

To reactivate your Cricut machine, go to the Cricut website and log in to your Cricut account. Next, go to “My Account” and select “Cricut Machines” from the sidebar menu. This will bring up a list of all your registered Cricut machines and will show whether they are active or inactive.

If the machine is inactive, select the “Reactivate” button to add the machine back to your registered devices. Once the machine is reactivated, you should be able to use it as normal.

How do I delete a paired Bluetooth device?

To delete a paired Bluetooth device, the first step is to access the Bluetooth settings on your device. This may vary slightly depending on the kind of device you are using.

On an iPhone, access the Settings app and select Bluetooth. Here you should be able to see all the devices that are paired with your phone. Select the device you would like to delete and then select “Forget This Device. ”.

On an Android device, there are multiple ways to do this. Depending on the version of Android you are running, you can either access the Bluetooth settings from the Settings app, or by going to the Settings widget on the home screen.

You should be able to find a list of all the paired devices. Select the device you wish to delete and then tap the “Unpair” or “Forget” button.

It’s also possible to delete a paired Bluetooth device by using your computer. Many computers have a Bluetooth panel that can be accessed through the Control Panel or System Preferences. Select the Bluetooth device you want to delete and remove it.

Once you’ve deleted the paired device, you can now pair it with a new one.

How do I turn on my Cricut Bluetooth?

To turn on your Cricut Bluetooth, you will need to follow these steps:

1. Make sure your Cricut Bluetooth device is powered on.

2. Position your Cricut device within 10 meters of your device.

3. On your device, access the Wireless & Network settings, then turn on the Bluetooth connection by sliding the switch to the ON position.

4. If your device still doesn’t appear under the available devices list, search for new devices and check again.

5. Select your Cricut device in the list of available devices then wait for it to connect.

6. Now your Cricut device should be connected to your device.

7. If you are having trouble connecting, try switching your device off and on then connecting again.

8. Make sure that your Cricut Bluetooth device is correctly charged and running the latest version of firmware.

9. Check that both devices have enough battery life and are kept within 10 meters when connecting.

Following these steps should allow you to successfully turn on and connect your Cricut Bluetooth device.

Why is it saying Bluetooth device failed to remove?

There can be several reasons why a Bluetooth device has failed to remove. Some of the most common causes are interference from other Bluetooth devices, insufficient bluetooth network coverage, a device not being compatible with the system, or a device that is outdated or has malfunctioned.

It is also possible that the operating system or hardware has not been properly configured for Bluetooth capabilities. If the problem persists, it may be necessary to reach out to a device manufacturer or service provider for more help.

Why is my Cricut offline?

There can be several reasons why your Cricut is offline. The most common reason is that your Cricut machine is not connected to a strong Wi-Fi network. This means that the machine is unable to access the internet, which would explain why it appears to be offline.

To ensure that your Cricut machine has a strong internet connection, make sure that it is connected to the correct Wi-Fi network and that the password is correct.

If your Wi-Fi connection is strong, the problem may be related to your Bluetooth connection. Make sure that your Cricut is powered on, and that your computer and mobile device are within close range.

Additionally, check the Bluetooth settings on your computer and mobile device to make sure that it is enabled.

If your Wi-Fi and Bluetooth connections are both strong, you may need to perform a soft reset on your Cricut machine. To do this, turn off the machine and unplug the power supply. Wait a few minutes, then plug the power supply back in and turn the Cricut back on.

This should reset the connection, and your Cricut should appear back online.

If the issue persists, contact the Cricut manufacturer for further assistance.

Where do I find the pairing code for my Cricut?

In order to find the pairing code for your Cricut, you will need to first ensure that your Cricut machine is powered on and that you have the Cricut Design Space app downloaded on your phone or computer.

Once you have these two things in place, you can open the Cricut Design Space app and look for the “Bluetooth” icon in the top left corner. Clicking on that icon will open up another window with your pairing code listed and a button to click to pair your Cricut.

Your Cricut pairing code should appear here; if not, you can look on the device itself (in the settings menu or back panel) or consult the user manual that came with your machine. Once you have the pairing code, simply enter it into the Cricut Design Space app to get connected.

Why won’t my Cricut Air 2 Connect?

Resolving a connection issue between the Cricut Air 2 and your computer may require troubleshooting various system components.

First, make sure all your cables and wiring is plugged in correctly, secured and not damaged. Verify that the USB cable is connected securely to both the Cricut Air 2 and the computer. Additionally, you can use a different USB cable and/or USB port on the computer to ensure the connection is not being compromised by worn-out or faulty wiring.

Next, make sure you have the latest Cricut Air 2 drivers installed on your computer. To check for and download the newest version of the drivers, visit the Cricut website. Your computer might also require an operating system update from the manufacturer in order for the connection to work properly.

You should also check to make sure your Cricut Air 2 is not in Sleep Mode. If it is, connect it to your computer and press the power button to wake it up and establish the connection. If this doesn’t work, hold down the power button for 10 seconds to reset the machine and try again.

Finally, if the Cricut Air 2 still won’t connect to your computer, your computer might be having a problem recognizing it. To troubleshoot this, you can check your system device manager to determine if the Cricut Air 2 is being recognized as a correct device.

If it is not, uninstall and re-install the Cricut Air 2 drivers.

If none of these steps resolves your connection issue, contact Cricut customer support for further help.


Monday 4th of September 2023

Your instructions for resetting and your video don't match.


Tuesday 21st of February 2023

maker is correctly connected to power and light is on, on the inverter machine will not power on with the power button. cannot go further with problem solving unless maker is turned on.


Tuesday 21st of February 2023

maker is correctly connected to power and light is on, on the inverter machine will not power on with the power button. can not go further with problem solving unless maker is on. bought this machine new cou

Elizabeth Furrer

Friday 16th of December 2022

I just bought my "Maker 3" today, but nothing happens when I push the power button. I have an "Air 2" and remember it just turning on with the button. Have I missed an instruction?