Resetting MASCHINE is easy enough. First, power down your device. Then press and hold the Utility button and then the Play button (Lit with a blue LED) at the same time. Eventually, after a few seconds, the LED’s in the pads should start to flicker red.
At this point, you can release both buttons. The MASCHINE is now reset.
It’s important to remember that this type of reset will not preserve any of your current project settings or user samples. To completely restore the MASCHINE to its original factory settings, you must enter a full factory reset.
To do this, power down your device and then press and hold the firmware button and then the Play button (Lit with a blue LED) at the same time. The LED’s in the pads should begin to flicker blue and red– this is your signal that the reset is successful.
For more information on resetting MASCHINE, please refer to the product user manual.
Can you use MASCHINE studio without a computer?
No, you cannot use MASCHINE Studio without a computer. MASCHINE Studio requires PC or Mac with a USB 2.0 port, Intel® Core™ 2 Duo processor (Core i7 recommended) and an internet connection to access Native Access.
The standalone version of MASCHINE 2 software is only included with MASCHINE STUDIO and must be connected to a computer to run. MASCHINE STUDIO is a hardware/software music production system that combines the power of a computer and computer-based recording with the feel of a grooving music-making machine.
It provides a high-performance hardware controller, a powerful production software suite, and an integrated sound library.
How do I unregister Native Instruments products?
To unregister Native Instruments products, you will first need to deactivate the software. This process is different for each product, but generally you will need to open the NI Service Center and select your product.
Then select the ‘Deactivate’ option and select Unregister from the license menu. Once the product has been deactivated, you will be required to uninstall the product from your system before you can complete the unregistration process.
Once the product has been successfully uninstalled, you can complete the unregistration process by visiting NI’s user account page. On this page, you will see a list of all of your registered products and can select a product to unregister.
Follow the on-screen instructions to complete the process. Once complete, you will have successfully unregistered the Native Instruments product.
How many computers can you install MASCHINE on?
You can install MASCHINE on two computers at the same time, provided that you use the same account for each installation. The terms of service for NI’s service center state that you can register your product license on two machines and activate the software on both.
However, you can only use one of the two installations at a time. To switch your MASCHINE installation from one computer to another, you’ll need to deactivate the product from the previous machine and then activate it on the new one.
In addition, you should limit the amount of data that is transferred between the computers. To make it easier to switch back and forth, you can create separate projects and samples on each machine to avoid cross-referencing.
How many computers can I put Native Instruments on?
That depends on the product you are using and the type of license you have purchased. Native Instruments products can be activated on a limited number of computers, depending on the product version and the type of license you have.
The full version of KOMPLETE 12 (Ultimate or suite) is limited to three installations, while KOMPLETE 12 standard/select will allow only one installation. KOMPLETE 11 and earlier versions have different activation limits.
The Maschine and Maschine MK2 product lines have a three-machine limit, while the full version of iMaschine 2 allows usage on up to five computers. All of NI’s other software products have only one installation limit.
For more information about Native Instrument product activation limits, please refer to the company’s website.
Can I transfer Native Instruments to another computer?
Yes, you can transfer Native Instruments to another computer. The best way to do this is to use Native Access, Native Instruments’ software management system. With Native Access, you can easily transfer all of your purchases and activation records to another computer.
Once you have downloaded and installed the application, you can log in to your account and authorize the new computer. Native Access also allows you to manage any additional downloads, updates, and upgrades in one place.
Additionally, you can use Native Access to access future product updates, purchase additional products, and sync your settings across multiple computers.
How do I permanently delete Kontakt library?
Permanently deleting a Kontakt library is relatively straightforward. The process should take no more than a few minutes.
First, open the Native Instruments Service Center application on your computer. Find the “Libraries” option, and select the Kontakt library you wish to remove. You can use the search function to quickly find the correct library.
Once your selected library appears in the list on the left side of the window, click the “Remove” button at the bottom of the window. A warning will appear stating that all content associated with the library will be deleted; click “OK” to confirm.
The library will now begin to be deleted. Once the process is complete, the library will no longer exist in the Service Center list or on your computer. You may need to clear the list of installed libraries in Kontakt itself in order to completely remove the library (the exact location of this list will vary depending on the version of Kontakt you have installed).
If you need to reactivate a library, you can log into your user account and download the library again. Some libraries also require a separate license purchase in order to permanently delete them. In this case, you would need to contact the developers of the library for further information.
Can the Maschine mk2 be used as a standalone?
Yes, the Maschine mk2 can be used as a standalone. It comes with a built-in audio interface and interactive step sequencer, which allow it to function independently of a computer. The machines also has a built-in sampler, so beats can be created even without a connected computer.
It also includes powerful editing features, allowing users to craft their own unique sound. The dedicated performance pads make it easy to control and play back samples, while its 8 GB of on-board storage provides plenty of room to store audio data.
With the included 2.5-inch color display, it is simple to access menus, sample libraries and tweak settings.
Can you use Maschine stand alone?
Yes, Maschine can be used as a standalone device for producing music. It has a built-in audio interface, allowing you to easily connect external instruments or microphones, and then record and produce music entirely within Maschine.
It also features an advanced sampler, allowing you to sample any sound you like and then use these samples to create new sounds in your productions. Moreover, Maschine also includes a variety of pre-installed instruments and sounds, making it an amazing virtual instrument that can be used in either standalone or in conjunction with another DAW.
What software does Maschine use?
Maschine is a hardware and software production platform created by Native Instruments. It consists of a controller that interfaces with the Maschine software, which allows you to create rhythms and melodies, sequence, sample, and arrange entire tracks.
The software is based on an intuitive ‘tag-and-drop’ system which makes creating and arranging different elements of a track much easier.
The software allows you to record audio, and provides a widely used library of sounds and samples. It also includes a multi-track mixer, MIDI effects, and a variety of other effects and processing. Furthermore, the Maschine software provides you with the ability to record and edit automation, as well as provide transport functions such as quantization and synchronization.
The Maschine software also includes a range of virtual instruments and supports VST and AU plug-ins. This allows you to extend the range of sounds and effects you have access to, as well as create detailed beats and melodies.
What DAW does MASCHINE work with?
MASCHINE is an intuitive music-production system developed by Native Instruments. It works with a variety of Digital Audio Workstations (DAWs) including Ableton Live, Logic Pro, Pro Tools, and Cubase.
The integration with these DAWs is done through the MASCHINE plug-in. This plug-in allows for easy control and seamless integration with any of the aforementioned DAWs. When used with a compatible DAW, it allows for full mixing and mastering in a single application.
Furthermore, the MASCHINE software also provides a full suite of production tools, such as: a library of sampled instruments and effects, beat-making tools, a full mix editor, and real-time audio and MIDI control.
Therefore, MASCHINE is a great choice for producers looking for a powerful, yet easy-to-use, music production system.
Is MASCHINE software included in Komplete?
Yes, MASCHINE software is included in Komplete. Komplete is Native Instruments’ platform for music production – equipped with a range of powerful instruments, effects and sound libraries. MASCHINE is a powerful production system, featuring cutting-edge software, intuitive hardware, and an integrated workflow for quickly creating beats and working with samples.
It is the ideal tool for both studio production and live performance. With Komplete, MASCHINE comes with an extensive selection of included sounds and instruments, plus access to further expansions from the Native Instruments online store.
As such, MASCHINE is the perfect choice for anyone looking to easily create professional sounding beats and music quickly, or for those wanting to add powerful new production tools to their existing setup.
Does MASCHINE come with Kontakt?
No, MASCHINE does not come with Kontakt. Kontakt is a powerful software sampler and virtual instrument developed by Native Instruments and sold separately. Although it can be used with MASCHINE, they do not come bundled together.
If you want to use Kontakt with MASCHINE, you’ll need to purchase Kontakt as a standalone product. Kontakt is a great tool for creating and manipulating samples, and is often used with MASCHINE to make beats, create new sounds, or even design complex virtual instruments.
Is MASCHINE 2 a DAW?
No, MASCHINE 2 is not a Digital Audio Workstation (DAW). It is a sampler/sequencer hybrid solution designed for creating beats and grooves. It comes with an expansive library of sounds and effects and can be used as a controller for many different types of plug-ins, synths and DAWs.
However, MASCHINE 2 does not provide the comprehensive feature-set of a full DAW, so it cannot be used to record, edit and mix multitrack audio.