Skip to Content

How do you shorten curtains fast?

If you need to shorten curtains quickly, there are a few different methods you can use. The first thing you should do is measure your window frame or curtains rod and determine how much you need to reduce the length of the curtain.

One option is to mark the new length directly on the curtain with a fabric marker. Then, fold the excess fabric over the marker several times and make sure the folds are of even size. Take a sharp pair of scissors and cut on the marker line, keeping the scissors at a 45-degree angle.

You can repeat this process for each panel if the curtains have several panels. Iron the finished part with a hot iron to keep it neat and tidy.

Another option is to cut the excess fabric off the bottom of the curtain panel. First, measure the exact amount of fabric you need to remove and mark that measurement with a pencil or fabric marker on the back side of the curtain.

Use a sharp pair of scissors to cut off the excess fabric. Then, do a straight stitch—at a length appropriate for the fabric type—to close the bottom of the curtain. Don’t forget to press the bottom edge with an iron after you’ve finished.

For an extra bit of finessing, you can also finish off the bottom edge of the curtain fabric with a rolled hem. A rolled hem is created by sewing a very narrow hem that can be almost unnoticeable. To do this, fold the bottom edge of the fabric over 1/4 inch and then fold it again so that the bottom edge is completely enclosed.

Iron the first fold and then sew close to the bottom edge of the fold, using a tiny zigzag stitch. You can trim away any excess fabric when you are done.

What to do when your curtains are too long?

When your curtains are too long, you have a few different options to choose from. You can shorten the curtains yourself, take them to a seamstress or alteration shop, or you can purchase curtains with the right length.

If you choose to shorten the curtains yourself, it’s best to use a stitch ripper or seam scissors to carefully remove the hems at the bottom. Once removed, measure and cut the curtain fabric to reach the desired length.

If the curtains have a pattern, be sure to line up the pattern when cutting. Once the curtains are cut to the desired length, use a needle and thread to sew a new hem a couple centimeters above the cut edge.

This will give the curtain a neat and polished look. If you don’t feel comfortable doing this yourself, taking them to a seamstress or alteration shop can be a great way to have the curtains tailored to your desired length and won’t be as expensive as buying new curtains.

However, if you are looking for a quick and easy solution, purchasing the correct size curtains with pre-made hems is the route to take.

How many inches should drapes puddle on the floor?

The amount of drape puddling that should be done on the floor is really a personal preference. Generally speaking, however, anywhere between six to eight inches is a good amount that looks appealing.

If you are going for a more formal look, you may want more puddling, up to 12-14 inches on the floor. If you prefer a more modern and contemporary feel, then you may want considerably less, around just six inches.

If you have longer drapes (floor-length), a puddling of 8-10 inches can really make the panels look great. Ultimately, the amount of puddle should be based on the style of your windows and the desired effect you are trying to achieve.

Is it OK for curtains to be too long?

Yes, it is perfectly fine for curtains to be too long. Depending on the style you are going for, long curtains can offer a more dramatic and eye-catching look that adds a touch of elegance to a room.

You can bunch them up at the bottom to achieve a more gathered look, or pinch pleat them to get a more structured look. As long as they don’t obstruct the view through the window, curtains that are too long can help create the look and atmosphere in a room that you desire.

How do you extend a curtain rod that is too short?

If the curtain rod is too short for the window, there are several ways to extend it:

1. If the rod is adjustable, you could try adjusting it to make it longer by rotating the ends of the rod to loosen it before pushing it out.

2. If the rod is not adjustable, you could purchase extension pieces, which are rods that attach side to side with screws or clips to make the existing rod longer.

3. If the rod is a shower or bendable corner curtain rod, you could use bridging pieces to increase the length.

4. You could also use a longer adjustable metal rod, which simply requires unscrewing the finials and screws before pushing it out to the desired length.

5. If you want a more polished look, use a curtain rod extending bracket, which is a metal bracket that screws into the wall to mount the curtain rod on and allows you to extend the rod out beyond the side of the window frame.

Choosing the right method will depend on the existing curtain rod, type of window, and look you are going for.

Should drapes touch the floor?

When it comes to floor-length drapes, the short answer to this question is yes—they should touch the floor. Floor-length drapes give a room a finished, polished look. If you have drapes that don’t touch the floor, it gives the room an unfinished, unbalanced appearance.

The drapes don’t have to trail on the ground, but they should have enough weight and length to reach the floor.

When selecting the length of your drapes, measure from the floor up to the highest point of the window frame. If the frame of the window is set back from the wall, you may need to hang the drapes a bit higher than the window frame so that the end of the drapes are on the floor rather than raising the drapes up to reach the window frame.

The best way to ensure that your drapes touch the floor is to select a fabric with a good drape, such as silk or cotton. Heavier fabrics, like velvet or tweed, will often be too stiff to drape to the floor properly.

If you prefer a heavier fabric, opt for a looser weave to allow the fabric to hang better. Whatever type of fabrics you choose, make sure you buy ample yardage for your drapes. This will ensure that the drapes are adequately long and will touch the floor.

Should curtains be longer than window?

It is generally recommended that curtains should extend slightly past the window frame for an aesthetically pleasing look. This can help to enhance the size of the window and create the illusion of a larger room.

When it comes to length, curtains should be at least 12-15 cm longer than the window frame in order to drape nicely. Longer curtains can also help cover any gap between the curtain rod and the wall, which can be particularly useful for rooms with high ceilings.

However, this does not mean curtains must be overly long – if too long, the curtains can block out too much light and make the room seem smaller. To avoid this, make sure to measure twice, and hang the curtain at a comfortable length.

Generally speaking, choose a length that is 18-22 cm longer than the window frame, depending on the amount of coverage you would like.

How do you fix curtains that are too long without sewing?

If you need to shorten curtains that are too long without sewing, there are several alternative methods you can use. One popular alternative is to use fabric glue or a hot glue gun. To use this method, you will need to measure the desired length and then cut the excess fabric off the bottom or side of the curtains to create a straight edge.

Next, spread fabric glue across the cut edges of the fabric and press them together to adhere. Another alternative is to follow the same technique with a hot glue gun. Simply heat up the glue gun, apply adhesive to the inside of the edge, and press the two sides of fabric together.

You may also want to use a heavy weight to keep the fabric held in place while the glue dries. If neither of these methods appeals to you, you have the option of using hem tape, which is a double sided adhesive tape that you can adhere to the edge of the fabric to hold it together.

To complete this look, use an iron to press the tape to the fabric and make sure it sets properly.

Can Ready Made curtains be altered?

Yes, in most cases, ready-made curtains can be altered. If the material is easily manipulated, such as fabric curtains, a seamstress can alter them to fit your window size. If the curtains are vinyl, a tailor can reduce the width with a special tool.

It is possible to take in the sides of the curtains, making them wider or slimmer as desired. Additionally, hemming the curtains to the desired length is possible. Depending on the complexity of the alterations and the fabric, the cost of curtain alterations is minimal to moderate, particularly when compared to buying custom-made curtains.

Can you cut curtains with scissors?

Yes, you can cut curtains with scissors. When cutting fabric or a curtain, it is important to have the right type of scissors for the job. Fabric scissors are designed with a long blade and a fine tip so that you can have precise cuts.

It is also important to use scissors that are sharp so there is no need to push the fabric too hard when cutting. Lay the curtain out flat on a cutting surface before making any cuts and measure twice before cutting once to ensure that all of your measurements are precise.

Additionally, use a fabric marker and ruler to mark lines on the fabric before making any cuts. Make sure to always keep your fingers away from the blade and always cut away from yourself. It is possible to cut a curtain with scissors, however it will take some patience and extra care.

Can a tailor hem curtains?

Yes, a tailor can hem curtains. Hemming is a stitching technique that is often used to finish the edges of fabric so it doesn’t fray. Tailors are experts at hemming and can easily adjust the length of curtains in order to make them the perfect fit for your windows.

The tailor can also reconfigure the edges to make the curtains look more professional, such as creating pleats or other designs. Furthermore, they will use the right thread and needles to give curtains a neat and elegant look.

With a tailor’s help, you can rest assured that your curtains will look perfectly tailored to your taste.

How much does it cost to have curtains pressed?

The cost of having curtains pressed will depend on the type of curtains you have, the size, and the material. If you have lightweight curtains that are made of cotton or polyester, it shouldn’t cost more than $1 to $3 per panel.

However, heavier curtains made of velvet or silk could cost up to $7 per panel. If you have large panels, rather than standard sizes, you’ll likely pay more. In addition, you might also have to pay a fee to have the curtains taken down and put back up after the pressing.

All in all, the cost can range from a few dollars to several hundred, so make sure to ask for a quote when contacting professional dry-cleaning services.