Skip to Content

How high should I hang Rubbermaid FastTrack?

For the best results, it’s generally recommended to hang Rubbermaid FastTrack shelves and accessories on the wall at a height of at least 16 inches. This will ensure that your items are easily accessible, while still providing enough space between the shelves and the floor or workspace below.

If it helps, you can measure 16 inches using a level or yardstick and mark a guideline on the wall before hanging the shelves and accessories. Additionally, many people hang their Rubbermaid FastTrack closer to the ceiling, usually around 30 to 50 inches, depending on the space and the desired look, but this is not required.

Can fast track rails be cut?

Yes, fast track rails can be cut depending on the material they are made from. For example, if the rails are made from a softer metal such as aluminum, they can be cut with a hacksaw. If the rails are made from a harder metal like steel, they can be cut with a metal-cutting saw or even an angle grinder.

In order to avoid damaging the rail, it’s important to make sure that the cutting blade is adequately cooled to prevent overheating. Additionally, it may be necessary to clamp the rail in place to keep it from shifting while cutting.

Can you cut Rubbermaid FastTrack wall panel?

Yes, you can cut the Rubbermaid FastTrack wall panel. The panels are made from a durable steel that is designed to be easy to cut. You will need to use a hacksaw and make sure to wear safety goggles, as the process will produce small chips and particles.

When cutting the panel, make sure to mark your cut line with a pen and use masking tape to ensure an even cut. After making your cut, use a metal file to smooth any jagged edges.

Are fast track and configurations compatible?

Yes, fast track and configurations are compatible. Fast track is a framework that allows the rapid and automated development of enterprise-level applications. It uses a range of tools, processes, and frameworks that enable developers to quickly create and deploy applications.

Configurations, on the other hand, are the sets of resources, settings, and options that are deployed when creating an application. Through configuration, developers can define how an application behaves, as well as what components are used to build and maintain the application.

Both fast track and configuration can be used together to quickly develop and deploy applications. Fast track provides the speedy framework for automating and streamlining the development process, while configuration provides developers with the ability to define the specific details about how their applications will behave.

Together, fast track and configuration make for a powerful and efficient development process that helps to ensure the success of the application.

What is the difference between Rubbermaid FastTrack and configurations?

Rubbermaid FastTrack is a garage organization system that provides an easy to install and flexible option for storing items in the home or garage. It consist of a steel rail system that allows of different components to be mounted, offering a variety of options for organizing items such as tools and sports equipment.

The availability of different components such as shelves, baskets, hooks, and accessories makes it possible to customize a FastTrack solution that fits whatever specific storage needs a homeowner may have.

Rubbermaid Configurations is a closet organization system that allows homeowners to customize their closets and organize their possessions. This system uses a unique hanging bar design that uses separate components to create individual and flexible solutions for organizing any type of closet, from a child’s room to an adult’s.

Customizable components such as shelving, baskets, and double hangers offer different types of organization and can be used to sort clothes, shoes, and belongings while maximizing closet space.

Is Rubbermaid and Closetmaid interchangeable?

No, Rubbermaid and Closetmaid are not interchangeable. While both companies offer a wide variety of products for home organization and storage, the Rubbermaid brand focuses on items for outdoor and kitchen use such as storage sheds, coolers and shelving units, while Closetmaid specializes specifically in closet organization systems.

Additionally, each brand has different features and benefits associated with their products, prices and materials used, so it’s best to assess your specific needs and research each company before making a purchasing decision.

What is the purpose of a hang track?

The purpose of a hang track is to create an additional point of support for a gypsum wallboard system. Generally, it is an inverted steel angle bar mounted to the back of the gypsum wall board before it is fastened to the wall or ceiling surface.

It is used to help support the gypsum wallboard and provide additional strength against shear forces, as well as overcomes problems such as shifting carpentry and wood framing members. This helps to ensure that the finished walls and/or ceilings give a higher level of strength and longevity to the overall completed wall and ceiling system.

Hang tracks also can help to reduce deflection when used in combination with other components such as wall anchors, top-tracks, and adhesive. They may also be used to hang other items such as pictures, mirrors, cabinets, and shelves.

How far apart should Closetmaid brackets be?

Closetmaid brackets should typically be spaced 16 inches apart for a standard closet configuration. However, this may vary based on specific requirements, such as shelving length or closet footprint.

If you are using a wide shelf panel, it may be necessary to move the brackets closer together than 16 inches. If the closet is larger than normal or the shelves very long, the brackets may need to be spaced further apart.

Before installing your Closetmaid brackets, consult the installation manual for the brackets to ensure you are following the proper spacing guidelines.

How do you hang wire shelves without brackets?

Hanging wire shelves without brackets is possible with a few simple tools and supplies. You will need a drill, screws, a hammer, a level, a stud finder, wire shelves, and wall anchors if your walls are not made of solid material like wood.

First, you will use the stud finder to locate where the studs are in the wall. Note that there should be at least one stud between each shelf. You will then measure and mark on the wall where you plan to hang the shelves.

Next, use the hammer and drill to pre-drill holes into the wall. Use wall anchors if your walls do not contain studs. Then, use the screws to secure the wire shelves to the walls. Using a level, make sure that the shelves are level.

And finally, if you wish to make sure the shelves are extra secure, you can use metal L-brackets to reinforce the connection between the shelves and wall. Once completed, you can enjoy wire shelves without brackets!.

What is required when installing a Shelftrack?

When installing a Shelftrack, the following is required: tools, shelving brackets, mounting hardware, track, and shelf clips. Tools, such as a tape measure, power drill, level, and stud finder are essential for installation.

The shelving brackets and hardware are needed to secure the track to the wall and the shelf clips are used to attach the shelves to the track. In most installations, the tracks should be installed on studs for maximum support; using a stud finder to locate these is strongly recommended.

If drilling into concrete or brick, a masonry drill bit will be required. Once the track has been secured to the wall, the shelf clips and shelves can be installed and adjusted to the desired height.

A level should be used to ensure the shelves are properly aligned. Finally, take a step back and admire your newly installed shelftrack!.

How do you cut a fast track rail?

Cutting a fast track rail can be a difficult process as it is designed to handle high speeds and a lot of weight. First you will need to ensure you have the right equipment to safely do the work. This includes a hacksaw or other suitable saw, a hacksaw blade with at least 24 teeth per inch, protective eye wear and gloves.

Begin by marking the cut line with a felt-tipped pen. Depending on the track design, it might be necessary to grind away some of the tread first. Place the rail in a secure vise and, if necessary, secure the sides to prevent movement.

Once in place, use the hacksaw to begin the cut. If a hacksaw blade is too large, use a smaller saw to make a small, shallow grove in the rail. This will act as a guide for the larger blade. Apply equal and steady pressure as you work your way along, avoiding the temptation to rock the blade or rush the cut.

Continue cutting until you reach the other end of the groove and clean up the sides with a file if necessary.

Once the rail is cut, you will need to remove any burrs and refine the surface using a sander or deburring tools. Follow safety protocols throughout the process and make sure all tools are in good working order.

After finishing the cut and deburring, the fast track rail is ready for further installation and use.

How do I install fasttrack closet?

Installing a fasttrack closet is relatively straightforward. The first step is to decide what type of fasttrack system you would like to use and gather the necessary pieces for installation. Once you have the track and accessories, use a level to ensure the track is straight when you install it on the wall.

Secure the track in place with the provided screws. Then, install the accessories such as hang rods and shelves onto the track. Once all the pieces have been installed, adjust them to your desired height and placement.

Finally, use the provided hooks to hang clothing or other items as desired. With a little time and patience, you will have a fasttrack closet system installed in no time.