You can find curtain rods in various lengths depending on your preference and the size of your window or doorway. Standard sizes are 28-48 inches, 48-88 inches, 66-120 inches, and 88-144 inches, however they are also offered in custom sizes.
The length of your curtain rod will be determined by the size of your window and the type of curtains or other window treatments that you are using. Some curtains may need to hang outside of the window frame and will require a longer curtain rod.
When considering the size of the rod, remember to leave an additional 3-6 inches on either side of the window for proper installation.
How do you install a 120 inch curtain rod?
Installing a 120 inch curtain rod is a fairly straightforward process, although there may be some minor variations depending on the type of curtain rod you’re using. Generally, these are the steps required to get a 120 inch curtain rod installed:
1. Decide the appropriate height at which to mount the curtain rod. Typically, the rod should be installed between 4-6 inches above the window frame or the top of the window opening.
2. Estimate the necessary width for mounting brackets, based on the diameter of your curtain rod. Most curtain rods are sold with mounting brackets included, but you may need to purchase additional brackets to fit a 120 inch length.
3. Mark the spots where the mounting brackets will go using a measuring tape and a pencil. To ensure the brackets will fit the length of your curtain rod, measure from the desired mounting height to the bottom of the window frame, divide this number by two, and then subtract the diameter of the rod from the number.
For example, if the distance from the desired mounting height to the bottom of the window frame is 96 inches, subtract four inches to account for the rod’s diameter (96 inches – 4 inches = 92 inches).
Divide this number by two, giving you 46 inches, which is the distance away from the desired mounting height at which you will place each bracket.
4. Measure and mark the spots where the drill holes will go for each bracket. Most curtain rods are sold with included screws, but make sure you have the appropriate drill bit for its size.
5. Pre-drill the holes for each bracket using the appropriate-sized drill bit.
6. Put the bracket into the pre-drilled holes and secure the brackets to the wall.
7. Insert the curtain rod into the brackets and tighten the bracket screws to secure the rod in place.
8. Hang the curtains and enjoy!
How far should a curtain rod extend past window?
When it comes to the correct positioning of your curtain rod, the ideal length of the rod should extend approximately 6” – 8” either side of the window frame. This allows the curtains to fully cover the window when they are closed, while also allowing the curtains to stack back far enough when they are open to give an unobstructed view of the window.
When measuring for a curtain rod, ensure that you measure the complete window recess width and then add the extra 6” – 8” of rod. The distance of the rod from the window will determine the overlap amount that is required for the curtains to provide a complete look for the window.
If the curtains are to be hung from ceiling to floor, the overall length of the rod should be extended by at least 15” from both sides of the window to ensure adequate stacking.
Can you join curtain rods together?
Yes, you can join curtain rods together. In fact, there are many ways to do so depending on your specific needs. If you have two of the same rods, you can create a long, seamless curtain rod using the 3-piece coupling connector.
This connector is designed specifically to hold the two pieces in place and allow them to be joined at the center. If you have two different curtain rods, you can use an adjustable joint connector. This connector slides along the rods, allowing them to be placed next to each other.
You can also use curtain rings to join, allowing you to easily move the end of one rod to the other. Finally, if you have two similar but different sizes of curtain rods, you can use an adjustable bridge connector.
This connector allows the two rods to overlap in the middle and be held in place. Each of these solutions will allow you to join the two curtain rods together.
Do curtains have to touch the floor?
No, curtains do not have to touch the floor. The length of the curtains is up to personal preference and the overall design of the room. Short curtains can add a modern look to a room, while longer curtains can add a classic look.
The amount of fabric that hangs past the window can depend on various factors, such as if the window is next to a heat source or if the window is covered with shades or blinds. The ideal length of curtains is up to the preference of the person placing them.
How do you hang curtains when the window is at the top of the wall?
Hanging curtains on a window placed at the top of a wall can be a tricky task. The first step is to measure the window and decide how far down you want your curtains to hang. Along with needing a measuring tape and a pencil, you should also have either a drill or screwdriver and the appropriate hardware (screws, anchors, brackets, etc).
Once you have all the necessary supplies, you can begin by installing your mounting hardware. Start by making reference marks that indicate the exact location the mounting hardware should be affixed to the wall.
If your mounting hardware contains screws, it may be helpful to pre-drill the holes. Once you have pre-drilled the holes, use an anchor to screw the hardware into the wall.
Next, attach the drapery hooks to the curtain rod. Depending on the type of curtain rod you purchased, there may be a different method for attaching the hooks. Refer to the manufacturer’s instructions for the proper technique.
Finally, hold the curtain rod up to the wall and attach it to the hardware you installed earlier. Once the rod is secure, you can attach the curtains to the drapery hooks. Attach the top of the curtain to the hooks at the top of the wall and then drape the curtains.
You should also adjust the curtains at the bottom to give the desired look and fit.
Once the curtains are secured, you have successfully completed the task of hanging curtains on a window at the top of a wall!
How do you support the middle of a curtain rod?
To support the middle of a curtain rod, you might need to use a center bracket. This will help the rod to stay properly aligned and it will also keep it from sagging in the middle. When you install a center bracket, make sure to measure the length of the rod to ensure a proper fit.
Once it is attached, use a level to make sure it is level before you hang the curtains. If the rod does not have a center support bracket built in, you can also use a double bracket to create an even stronger center support.
With the double bracket in place, make sure your curtain rod is securely fastened with screws or wall anchors. This will ensure your curtains hang evenly and securely.
What is the maximum curtain rod length?
The maximum curtain rod length will depend on several factors, including the size of the window, the weight of the curtains, and the application. Generally, a heavy-duty curtain rod should be able to hold up to 25 pounds of curtains, whether mounted inside the window frame or outside.
If the window is wider than 80 inches, a longer curtain rod may be necessary. One option would be to use two shorter rods, meeting at the center, or use an extra long curtain rod that can accommodate a single rod of up to 200 inches.
In the case of an energy-efficient window treatment, the manufacturer’s directions should be consulted.
Can a curtain rod be too long?
Yes, a curtain rod can be too long. If the rod is too long for the window, the curtains won’t open or close properly. For example, if the rod is too long, the curtains won’t be able to fully open, and they may hang in a way that blocks the light.
It’s also possible for too-long rods to sag if they can’t be properly supported. To make sure the rod is the right size, measure the width of your window frame and add 8-10 inches on either side. This will ensure that the curtains can open and close without any problems.
How long should curtain rod be for 72 inch window?
The appropriate length of a curtain rod for a 72 inch window depends on two things: how far away from the window you want the curtains to hang and the size of the drapery panels you are using. If you want the curtains to extend 6 inches away from the window frame on either side, measure 144 inches from one side of the window frame to the other, and then subtract 12 inches from this measurement to account for the drapery panels overlapping in the center.
This leaves you with a theoretical curtain rod length of 132 inches for a 72 inch window.
However, if you can go beyond the traditional 6 inch overlap and opt for a larger overlap – such as 10 or 12 inches on each side – you should add the difference to the 144 inch window measurement to account for the extra space.
Additionally, if you want to hang an additional window treatment in front of the curtain panels (such as a decorative valance or swag), you should measure the total length of the valance or swag and add this measurement to the theoretical curtain rod length to get the correct measurement.
Also, remember that curtain rods come in a variety of sizes, so it’s important to measure both the window and the drapery panels to determine the correct length of your curtain rod. It’s best to have a few inches of extra length on either side of the rod for adjustability.
What is the standard length of a rod?
The standard length of a rod varies depending on its purpose. General purpose rods for basic household tasks typically measure 3 feet or 36 inches. However, rods used for industrial and commercial purposes, such as bolts and tension rods, are often made in lengths of 4, 6, 8, and 10 feet.
The size of a rod may also be based on the length of a particular project; for example, curtain rods, carpentry, and plumbing jobs may require a specific size rod based on the dimensions of the room or the size of the fixture being installed.
Additionally, custom designs can be ordered with a specified length.
What does 20 rod mean in length?
20 rod is a unit of length measurement that is equal to 16.5 feet (5.066 meters). It was traditionally used in areas of England, mainly in Norfolk and Suffolk, but is rarely used anymore. The term rod comes from the Old English rodd and originally referred to a fishing rod or line.
In measurements of length, a rod is equal to 16.5 feet, or 1/320th of a mile, and is divided into 16.5 feet-long sections or ‘rods’. A 20-rod measurement would therefore be equal to a total of 330 feet or 100.584 meters.
What is medium/heavy rod good for?
Medium/heavy rods are commonly used for outdoor fishing in various bodies of water. They are typically best suited for catching larger fish, and can handle more weight than lighter rods. With a medium/heavy rod, an angler can cast farther out, and also use more sophisticated techniques like bottom fishing and troll fishing.
These rods are also ideal for heavy cover, such as weeds, lily pads, and reeds, and can handle heavier lures. The heavier rod also provides more power when reeling in, allowing the angler to pull in larger fish.
Other applications include deep water fishing and cover-rich stuctures, such as docks and drop-offs.
