Skip to Content

How many HP is DW735?

The DW735 13″ Heavy Duty Thickness Planer from DeWalt has a 10 amp, 20,000 RPM motor that provides plenty of power to the two-speed gearbox, to which is connected a pair of spiral cutters in the cutterhead.

The two when combined allow for a maximum cut depth of 1/8″ and a maximum cut width of 13″. The full motor power translates to 15 HP, making the DW735 one of the most powerful thickness planers available on the market today.

Does DW735 come with blades?

The DeWalt DW735 heavy-duty 13” three-knife, two-speed thickness planer comes with a set of three reversible knives that are made of German carbide steel. The knife set comes in a handy plastic storage case and fits neatly into the knife storage compartment at the front of the planer.

The knives are designed to last up to four times longer than traditional HSS knives, and the reversible design of the knives makes it easy to switch them out when they do need replacing. The DW735 also includes an extra four-sided disposable carbide-tipped cutter head for those tough tasks.

The cutter head is replaceable, so you can easily switch it out for faster, easier planing. It’s a great feature to have, and it ensures your DW735 planer won’t be put to rest anytime soon.

Is Dewalt 735 worth it?

Whether or not the Dewalt 735 is worth it depends on your needs. This planer is a great choice for both hobbyists and professionals. It features a powerful 15 Amp motor, so it can easily handle tough jobs, and has an impressive 15,000 RPM speed.

The two-speed gearbox and the three knife cutterhead make this a versatile tool for just about any job. The thickness range of 6-1/8 inch is more than enough for most projects, and the depth of cut is adjustable down to 1/8 inch.

With its robust design and cast iron base, this planer is made to last.

Overall, if you’re looking for a reliable and accurate planer for your workshop, the Dewalt 735 is a great choice. Its powerful motor, adjustable depth of cut, two-speed gearbox, and three knife cutterhead make it ideal for both beginners and pros alike.

However, it may not be the right choice for everyone, so make sure to do your research and find the planer that is best suited to your needs.

How do you use a Dewalt DW735X?

The Dewalt DW735X is a two-speed planer that offers an impressive array of features. It boasts a 15-amp motor that operates at up to 10,000 RPM and has a maximum depth capacity of 8-1/4 inches for tackling wide boards.

To use the DW735X, you’ll want to start by reading the instruction manual. Once you have done so and your workpiece is securely clamped down, the machine is simple to use.

Begin by setting the correct cutting depth. The DW735X has a series of eight numbered tabs that can help you easily adjust the cutting depth. After setting the correct depth, you’ll want to make sure the knife is properly positioned.

The DW735X features a patented material removal system that allows you to adjust the blades in three different positions. Once you’ve set the correct blade position, it’s time to turn on the planer. After pressing the power button, you can use the left handle to raise or lower the table.

It’s important to note that the DW735X has a two-speed gearbox. To switch between the two speeds, you’ll want to use the switch located on the top of the machine’s frame. When setting the higher speed, make sure you’re using light to moderate pressure when pushing the board.

When you’ve reached the right depth and the board is finished, you can turn off the planer and unclamp the board to finish the job.

What is the dial on the side of a Dewalt planer for?

The dial on the side of a Dewalt planer is used to adjust the depth of the planer’s cut. This means it’s used to determine the size of the material that the planer is taking off when it passes over a piece of wood.

When you turn the dial on the side of the planer, it moves a ramp inside the tool that adjusts the depth of the cut, allowing you to achieve the desired depth with each pass. This is especially helpful when you are trying to shave off pieces of wood that are too large for the normal planer blade to safely handle.

With the dial on the side of the planer, you can accurately adjust the depth down to a fraction of an inch and get the perfect finish on your woodworking project.

Can a planer work as a jointer?

No, a planer cannot effectively work as a jointer. While it could theoretically be used to joint boards, a planer is designed to remove material from the face of boards to create a smooth finish. A jointer is used to create consistent and even edges, which is a different function that requires a different type of machinery.

The size and shape of blades on a jointer are designed to cut straight edges and can often cut deeper than a planer to ensure an even surface. Additionally, jointers often have a longer working surface compared to a planer which allows larger board to be jointed correctly.

A planer cannot achieve this level of accuracy and consistency that a jointer can, so it should not be used to joint boards.

How do you use a Dewalt electric hand planer?

Using a Dewalt electric hand planer is relatively straightforward, especially for those with experience using power tools. To start, make sure the planer is correctly plugged in and the power switch is turned off.

Next, adjust the depth setting by sliding the knob on the top of the planer. Depending upon the type of material you are planning, you may want to adjust the knurled wheel located on either side of the planer.

This wheel adjusts the amount of material that can be removed in a single pass.

Once the settings are adjusted, hold the planer firmly with both hands and turn the power switch on. While running the planer, keep the front of the planer slightly raised to prevent it from digging too deep.

Move the planer steadily across the surface of the material you wish to plane, allowing a few seconds for the cutting edge(s) to begin cutting. Make sure to keep the planer level during use.

When finished, turn the planer off and allow the cutting edges to come to a complete stop. Unplug the planer from the power source and clean up the debris from your project. After each use, remember to check the planer for debris and dirt which could interfere with its effectiveness.

How do you install a Dewalt Thicknesser?

Installing a Dewalt Thicknesser requires a few basic tools, such as a wrench and Phillips screwdriver. Start by making sure the Thicknesser is properly unboxed and all of the parts and pieces are accounted for.

Once you have confirmed all of the pieces are present, begin by attaching the base to the Thicknesser. Take the base plate and position it against the bottom of the Thicknesser. Secure the bolts with a wrench, taking care to tighten them properly but not overly tight.

Once the base is securely fastened, it’s time to attach the blade guard to the saw table. Align the guard to the slot on the table and secure it with screws tight enough to prevent shifting, but not so tight as to damage the components.

Attach the handle to the top of the saw table and secure it with the two Phillips screws. With the handle attached, you can now raise and lower the blade guard. Finally, plug in the Thicknesser to a wall outlet and switch it on to make sure it’s functioning correctly.

How many amps does Dewalt 735 planer use?

The Dewalt 735 planer uses a 15-amp motor for maximum power and efficiency in its operations. The motor is engineered to provide power for smooth cutting and finish planing even in the most demanding applications.

It also has a soft start feature that helps reduce the initial startups, allowing you to progress from start to finish much more quickly. The planer also features an integrated fan-assisted chip ejection system that helps remove chips and debris from the cutter head and exhaust port.

This allows the planer to run cooler and more efficiently, leading to a longer tool life.

How do you stop snipe on a DeWalt planer?

To stop snipe on a DeWalt planer, there are a few steps you can take to help reduce the frequency of snipe occurring.

First, make sure your blades are sharp and balanced. Dull and misaligned blades will cause the router to cause a more noticeable snipe in the work piece. Additionally, be sure the base of the router is mounted securely and is parallel to the work piece.

If the router is not mounted properly, a snipe can occur.

Then, decrease the depth of cut when possible to reduce the risk of sniping. You can also try raising the base or router shims to narrow the cut.

Finally, you can also extend the workpiece past the edge of the table. When the edge of the router bit is exposed, a snipe can form easily so this will reduce the risk of snipe occurring. Be sure to securely anchor the workpiece and use support blocks.

By taking these steps you should be able to improve the issue of snipe occurring on your DeWalt planer.

What causes snipe on a thickness planer?

Snipe on a thickness planer is caused by the workpiece dropping too quickly on the outfeed side, leading to burning or excessive tear out. This can happen due to a misalignment of the planer knives and the bed.

The knives should be aligned properly to minimize snipe. Other common causes include not having the proper amount of blade projection, using dull knives, or using a planer with insufficient power. Poor feed alignment can also be a factor, as uneven board edges can cause the wood to catch and drop.

Additionally, trying to feed too many boards at once can cause snipe, as the boards can either jump or the pressure can cause the boards to drop too quickly. Lastly, snipe may be caused by filing uneven from one side of the board to the other, creating an uneven cut.

What is planer sniping?

Planer sniping is a type of sniping in video games where the player makes use of a plane or other aircraft in order to gain a tactical advantage. This tactic can be used to stay out of the direct line of sight of enemies and gain a better view of the map or battlefield.

Planer sniping is becoming increasingly popular in modern video games due to the larger maps that allow for more strategic planning and the integration of aerial vehicles. By taking to the sky and gaining a higher view of the map, a player can use this knowledge to pick off enemies from further away and usually more safely than on foot.

This allows players to be more strategic and take control of a match without having to constantly battle it out with others on the ground.

What angle do you sharpen Dewalt planer blades?

Dewalt planer blades should be sharpened to an angle of 30°. It is important to use a sharpening jig that ensures that all blades are sharpened to the same angle, as variations in angle can prevent the blades from cutting correctly.

To sharpen the blades, use a standard file or grinder to remove any dings and nicks, then hone the blades to the desired angle. Be sure to be careful and follow safety guidelines when sharpening blades.

Additionally, it is important to inspect the blades before and after sharpening to ensure they are free from damage and sharpened properly to ensure the best performance of the planer blade.

What angle should planer blades be sharpened at?

The angle that planer blades should be sharpened at depends on the particular blade being sharpened and the intended use for it. Generally speaking, planer blades should be sharpened to an angle of 20-30 degrees.

The best advice is to use the angle recommended by the manufacturer, as that is typically the angle that is optimized for the blade. Additionally, a blade should be sharpened in the same direction for each side for best results.

This can be determined by looking for the original factory grind angle. If it is not visible, sharpen each side at the same angle to ensure an even cut. It is also important to make sure the blades are properly honed and balanced so that they are evenly sharpened and don’t vibrate while in use.

Is it possible to sharpen planer blades?

Yes, it is possible to sharpen planer blades. To do so, you will need some specific materials and tools. First, you will need a flat sharpening stone, a surface plate, oilstones, coarse and fine abrasive stones, as well as a jig to hold the blades in place.

You should start by cleaning off any debris or rust from the blades. Then use the surface plate to ensure that the blades are flat. Once the blade is flat, you can begin using the stones to sharpen the blade.

Start with the coarse stone, working across the blade in the same direction for several passes. Then move to the finer stone and repeat the same process. You should finish off with an oilstone for an even sharper edge.

Be sure to follow all safety instructions carefully when sharpening blades and take plenty of breaks to avoid overworking yourself.

Are DeWalt planer blades reversible?

Yes, DeWalt planer blades are reversible. DeWalt planers are designed with a reversible blade feature, allowing you to quickly and easily switch from one blade to the other. This is done by simply loosening the blade screws and flipping the blades.

By doing this, you get twice the life out of your DeWalt planer blades, as you can use each side before needing to replace them. Additionally, when one side of the blade begins to dull you are able to rotate it and get a fresh, sharp cutting edge.

Before reversing the blades, it is important to make sure they are properly aligned with each other, as this will ensure the best results. With an easy and efficient reversible blade feature, DeWalt planer blades are perfect for any job.

What is the angle on planer blades?

The angle on planer blades will vary depending on what type of planer is being used and the type of material being worked with. Generally, planers have fixed or adjustable blades. Fixed blades, also known as standard blades or neutral blades, are typically set at a 90-degree angle and are most commonly used for wood and softer materials.

A planer with adjustable blades allows you to create a customized angle based on the material being cut. When cutting harder materials, such as hardboard or metals, the angle should be adjusted in order to extend the life of the blade.

Generally, the optimum angle for cutting harder materials is 45 degrees or less. It is important to take into consideration the type of material and the size of the job when selecting the proper angle for a planer blade.

How do I know if my planer knife is dull?

When it comes to knowing if your planer knife is dull, there are several indicators you can look out for. First, you’ll want to inspect the condition of the planer knife itself. If it has visible chips or has lost its sharpness, that’s a good sign the knife is dull.

Additionally, if the planer produces slightly torn or ragged edges on the work piece, that is also a telltale sign that the knife is beyond its prime. If the planer is creating too much tear out in the wood, a dull blade is likely the culprit.

Lastly, if the planer is moving too slowly through the piece, making loud groaning or screeching noises, it’s a safe bet you will need to sharpen or replace your planer knife to ensure a quality cut.

Are planer blades worth sharpening?

Yes, planer blades are absolutely worth sharpening. Sharpening planer blades is an important part of properly caring for them, and it can extend the life of a planer blade significantly. When a planer blade is sharpened, it not only allows you to cut more efficiently, but it will also reduce the amount of tear out in your finished pieces, which can be especially important for projects that require a smoother, better-looking finish.

Additionally, sharp planer blades will significantly reduce the amount of time it takes for you to make a cut, since they will produce a cleaner, faster cut. In short, having sharp planer blades is essential for getting the most from your planer and properly caring for your blades.

What dulls a knife the fastest?

A dull knife can occur due to overuse, improper care, or improper sharpening. The most common cause of a dull knife is overuse. Using a knife to cut tough materials such as bones or hard plastics can cause the blade to become dull quickly.

Not regularly sharpening the knife can also lead to a dull blade. With each cut, small pieces of metal are removed from the blade, and if not regularly addressed, the blade will eventually become blunt.

Improper sharpening can also be the cause of a dull knife if done incorrectly. Dulling the knife too much or using the wrong stone or sharpening angle can also wear out the blade, making it dull faster.

To help keep your knife sharp, it is important to sharpen it regularly, and also avoid using it to cut hard materials such as plastic, bone, and rubber.