The cost of building a deck around an above ground pool can vary depending on the materials used, size of the deck and labor costs. Generally, pressure treated wood or composite material are the two most popular materials used for decks around an above ground pool.
Pressure treated wood is typically the most affordable material but will require more upkeep due to it being susceptible to moisture and temperature fluctuations. Composite material is more costly but requires less maintenance and will last longer.
The size of the deck around the above ground pool can influence the cost as well. Typically, a deck size of 8’x10′ or less will range from $700 to $1,400 depending on the material used. Decks larger than 8’x10′ may cost upwards of $3,000 or more, depending on the size, materials used, and complexity of the design.
Labor costs can also have an effect on the total cost of building a deck around an above ground pool, as labor typically costs an average of $50-$70 per hour, with a minimum of four hours. This can increase the total cost to upwards of $2,000 or more depending on the size and complexity of the job.
In summary, the total cost of building a deck around an above ground pool can range from $700-$5,000 or more depending on the materials used, the size of the deck, and labor costs.
Can you put an above ground pool on a wood platform?
Yes, you can put an above ground pool on a wood platform. Platforms can be built out of wood to provide additional space around the pool or to raise it to the desired height. When constructing a wooden platform for an above ground pool, make sure to use pressure-treated wood, as it is both durable and resistant to insects and water damage.
Be sure to use concrete blocks or wood stakes along the base of the platform for extra support and stability. Furthermore, the size of the platform should be able to support the size and weight of the pool.
Also, be sure to anchor the platform to the ground to ensure it remains in place. Finally, make sure the platform is level, so the pool is installed correctly, as any unevenness can cause issues with the installation of the pool and may cause premature damage to the structure of the pool.
Can you put a pool on concrete?
Yes, it is possible to put a pool on concrete. This is a common installation method, especially if the pool is going to be above-ground. Before installing a pool on concrete, it is important to ensure that the concrete is of appropriate thickness and strength.
The concrete should be at least 4 inches thick and made with a minimum 24Mpa strength concrete mix. It is also important to consider concrete drainage and the water table when determining the most appropriate installation method.
If the ground water is too high, the pool should not be installed on concrete, as this could lead to structural issues. Professional installation is essential when installing a pool on concrete and regular maintenance is needed to ensure that the concrete remains strong and impermeable.
How do you build a simple above-ground pool deck?
Building a simple above-ground pool deck is a great way to increase the usable space around your pool and enhance the look of your backyard. A deck also provides a safe place for you and your family to relax on hot summer days.
The first step for building a simple above-ground pool deck is to choose the right materials. Pressure-treated wood and composite decking are two popular types of decking materials available at most home improvement stores.
Pressure-treated wood is more affordable and easy to maintain, while composite decking is more expensive but less likely to rot or fade over time.
The next step is to measure and mark the deck area around your pool. Using a string line, make sure that your deck area is level and measure the area to ensure that the deck you’re about to build is the correct size.
Once you have the area measured, you’ll be ready to start building your pool deck. Using pressure-treated lumber, dig a 7-inch deep hole in the ground and place concrete footings every 10 -12 feet to form the pool deck’s foundation.
Place the deck posts into the footings and secure with concrete.
Using joists, quarter-inch plywood, and screws, build the frame for the deck. Cut the joists and plywood to the length and width of your pool deck and make sure that they are level. Secure the joists to the deck posts with metal joist hangers, and then use galvanized screws to secure the plywood to the joists.
Now you’re ready to lay the decking. Secure the pressure-treated or composite decking boards to the frame with galvanized screws or nails. If using composite decking, be sure to pre-drill the boards to prevent splintering and splitting of the wood.
Finally, add finishing touches to the deck. Security railing, furniture, and plants are all great options for decorating your pool deck. Once you’re finished, all that’s left to do is invite friends and family to come relax and enjoy the new addition to your backyard.
What is the cheapest way to build a deck?
The cheapest way to build a deck is by doing it yourself. First, you will need to decide what type of deck you want and then purchase the materials. This can include lumber, screws, nails, waterproofing sealant, and other necessary materials.
If you don’t have the tools to build the deck yourself, you can rent the necessary tools from a local hardware store. Once all the materials have been purchased, the deck can be assembled. Depending on the size of the deck and the complexity of the design, this may require multiple days of work.
Some important steps to building a deck include:
─ Set the deck’s perimeter using posts.
─ Set concrete footings for the posts.
─ Attach the joists for the deck’s framing.
─ Secure the deck boards to the joists.
─ Attach the railing posts and handrails.
─ Seal and paint the deck.
In addition to being more cost-effective, doing it yourself can provide a great sense of accomplishment. With careful planning and mindful construction, you can build an attractive and reliable deck!
Do it yourself pool deck?
Yes, you can build a do it yourself pool deck! To do this, you’ll first need to decide on the size and shape of your pool deck. You’ll then need to choose the best materials for your deck and make sure you have all of the necessary tools and supplies.
Next, you’ll need to plan the layout of the deck to ensure it meets codes and regulations for building a deck. After this, you’ll need to prepare the area by marking out where the deck will go, excavating for footings, and setting posts for the foundation.
Once the foundation is in place, the actual building of the deck can begin. You’ll need to build the deck frame, install the decking boards and railings, and finish with the steps. Finally, you’ll want to add finishing touches such as lighting, furniture, and decorative accents.
Doing a do it yourself pool deck can be a rewarding experience, as long as you take the time to do your research, plan ahead, and make sure to properly build the deck according to codes and regulations.
How do you build a deck for dummies?
Building a deck for dummies sounds intimidating, but it doesn’t have to be. Here are a few tips to help make your deck-building journey a success:
1. Get the right materials. Before starting, you’ll need to gather the right materials and tools. Depending on your skill level, you might want to consider buying pre-fabricated materials, like decking boards and posts, balusters and railings, along with hardware.
Additionally, you’ll need basic tools like a tape measure, drill, and saw.
2. Start by forming a frame. This is the most important part of the deck and will provide a solid base for the rest of it. Begin by setting four or six posts into the ground in a square or rectangular shape, depending on the shape and size of the deck you’re building.
3. Add the decking boards. Now it’s time to attach the decking boards. Using a drill and the screws you bought, attach the decking boards to your frame. Try not to over-tighten the screws; it could damage the boards and you need to leave enough room for expansion.
4. Add railing and balusters. If you are using pre-fabricated materials for the railings, install these now. Secure the railings to your posts with more screws. Then use the balusters to fill any gaps between the posts.
5. Staircase (if applicable). If the deck is elevated off the ground, you’ll need to build a staircase. Measure the height of the deck and create the steps to match. You’ll need to use stringers, risers, and treads to achieve the right shape and angle of your stairs.
6. Finishing touches. You’re almost done! Give your deck a good clean, remove any excess debris, and then it’s time to decorate and enjoy! If you’re feeling creative, consider adding plants, furniture, a pergola, and other features to enhance the space.
Following these steps will help you to build a strong and solid deck with very little stress. With careful planning and quality materials, you’ll be able to create a deck you can be proud of for years to come.
Good luck!.
How do you build a pool deck step by step?
Building a pool deck step-by-step requires a few basic tools and materials such as a power saw, circular saw, drill, concrete, rebar, gravel, pressure-treated lumber, and a selection of pool deck materials.
Step 1: Establish boundaries. Determine the shape and size of your pool deck and sketch out your design.
Step 2: Excavate the area. Research local building codes and excavation requirements to ensure your pool deck is compliant. Make sure to consider the size of your pool and the depth of the excavation area.
Step 3: Lay down gravel and sand. Gravel helps to ensure the underlying support structure is stable, while sand provides a cushion.
Step 4: Install steel forms. Install steel forms around the perimeter of the pool. This will serve as the foundation of your pool deck and make the construction process easier.
Step 5: Install rebar. Install rebar in the steel forms to reinforce the pool deck. Make sure to stagger and overlap the rebar for maximum strength.
Step 6: Pour the concrete. Pour the concrete into the steel forms and allow it to set for 48 hours.
Step 7: Install pressure-treated lumber. Begin installing pressure-treated framing lumber around the perimeter of the pool. Make sure that the top of the lumber is flush with the top of the concrete.
Step 8: Install deck materials. Install the deck materials of your choice. Popular pool deck materials include composite decking, wood, brick, stone, and more. Make sure to seal the pool deck material with a waterproof sealant.
Step 9: Install railings and furniture. Finally, complete the pool deck by adding railings around the pool and outdoor furniture.
How do you make a DIY deck?
Making a DIY deck is a great way to increase the value of your home and improve your outdoor space. It takes a bit of planning and hard work, but can be a fun and satisfying home improvement project.
Here’s what you need to do to make your own DIY deck:
1. Choose an ideal location for your deck and decide on the size. Take into account factors such as the space available, the type of foundation you will need, the amount of shade available, and any other convenience factors.
2. Gather the supplies you will need. You will need the right type of lumber, pressure-treated boards, decking screws, treated joists and posts, galvanized nails, and any additional materials like concrete mix.
3. Make a plan. Take the time to draw out your deck carefully. When drawing it, be sure to mark out any posts and footing locations.
4. Dig the footings. You will need to dig 10-inch diameter holes 24 inches deep to support your structure.
5. Pour the concrete and install the posts. While the concrete is still wet, place the posts into the cubes and fill to the top with concrete.
6. Attach the joists and secure them between the posts. Drill holes 4 inches from the outside edge of the joists and attach them to the posts using galvanized nails.
7. Lay the decking boards. Arrange the boards so that the seams are staggered and the joints are staggered alternatively. Secure the boards with screws, making sure to pre-drill the holes before driving the screws in.
8. Add any extras you want, such as stairs, railings, benches, or dedicated seating areas.
By following these steps, you’ll have a DIY deck that you can enjoy for years to come.
How do you make a pool deck out of pallets?
Making a pool deck out of pallets is an easy and cost-effective way to create an outdoor entertaining area. To get started, you’ll need to assemble several pallets to create the base of the pool deck.
You can connect several pallets together in an interlocking pattern using screws and sand down any rough spots.
Once the base is assembled, you can create the deck flooring by laying down a layer of treated wood pallets on top of the frame. You can either use individual boards that are cut to fit the frame or pre-made pallet flooring options.
Secure the boards to the frame with screws and apply a waterproof sealant to keep the deck safe from moisture and wear and tear.
Finally, you’ll need to furnish your pool deck with deck chairs and tables, string lighting, and other furniture to finish the look. With a few simple steps and a little bit of elbow grease, you can create a pool deck out of pallets that will make a great outdoor entertaining space.
Can Kool deck be applied to existing concrete?
Yes, Kool deck can be applied to existing concrete. Kool deck is a type of textured coating that can be applied to both new and existing concrete. When applying it to existing concrete, the surface must be properly cleaned and prepared before application.
This includes power washing the surface, repairing any cracks and unsealed areas, and coating the concrete with a bonding agent. Once the surface is prepared and the bonding agent has dried, Kool deck can be applied with a roller or sprayed using a hopper gun.
After the material has dried, it should be sealed to protect it from water and other elements. Taking the time to properly clean and prepare the surface is essential for ensuring a successful and lasting application.
What is the cheapest surround for a pool?
The cheapest surround for a pool depends on the size and shape of the pool, as well as your desired aesthetic. It’s possible to find attractive and safe surrounds that fit any budget.
For those looking for the cheapest option, pavers are often the least expensive choice. Pavers come in a wide range of colors and styles, and because they’re relatively thin, they make a pool look larger than it is.
Concrete pavers are often the cheapest, but can be difficult to clean and maintain. Clay pavers are slightly more expensive, but are much easier to maintain.
Another popular and affordable option is vinyl pool liner. Vinyl liners are easy to install, durable, and come in a variety of colors, textures, and patterns. They’re relatively cheap to install and can last for many years with minimal care or upkeep.
Finally, a popular and affordable solution is artificial grass. Artificial turf is increasingly realistic and comes in a variety of colors, textures, and patterns. It’s usually fairly cheap to install, and is low maintenance.
Plus, it provides a comfortable surface to walk on and also helps keep kids and pets safe.
What is the coolest pool deck surface?
The coolest pool deck surface depends on your individual preferences and needs. In general, materials that reflect the sun’s heat rather than absorb it are a great choice for hot climates. These include materials such as slate, travertine, and quartzite pavers.
While these materials offer a cool feel for bare feet, they are also extremely durable and slip-resistant. Other popular surfaces for pool decks include epoxy and rubber flooring. Epoxy is extremely durable, slip-resistant, and can be colored and patterned to your preference.
Rubber flooring is also durable and slip-resistant, but rather than providing a cool feel to the touch it adds to the playfulness and comfort of the deck. To cool down your deck, you can also opt for a shade structure such as a pergola, gazebo, or umbrella.
Whatever surface you choose, make sure you install a UV resistant coating for best results.
How much does rubber pool decking cost?
The cost of rubber pool decking varies depending on the size, type, and installation services, but you can expect to pay an average of $2 to $10 per square foot. For a full installation of rubber pool decking, you should also factor in labor costs which can range from $800 to $2,000 depending on the complexity of the project.
When considering rubber pool decking costs, it is also important to factor in the cost of sustaining and maintaining the decking in the future, as rubber needs to be regularly treated with a UV protectant to maintain it’s lifespan.
How much does it cost for a 20×20 deck?
The cost of a 20×20 deck can vary drastically, depending on the type of materials and features included. A basic, pressure-treated 20×20 deck with no railing or benches can start at around $3,000, while a premium composite or hardwood deck can easily reach upwards of $10,000.
Factors like deck accessories such as benches, railings, decking material, and labor can all affect the total cost of your 20×20 deck. Additionally, costs can vary depending on the complexity of the deck’s design, the geographical location of the project, and the professional’s expertise.
Ultimately, the best way to get an accurate estimate for your 20×20 deck is to consult with a local deck builder to discuss your project.