A Stihl pole saw typically weighs between 11 to 13 pounds. However, the weight can vary depending on the model of Stihl pole saw. Certain features and components such as the materials used in the pole saw, the battery type, and the length of the chain, will affect the overall weight.
For the most lightweight option, look for a model that has a lightweight aluminum body or a battery-powered pole saw. These types of Stihl pole saws weigh around 11 pounds. If you are looking for a heavier-duty pole saw, a model with a heavier steel construction and a larger engine can weigh up to 13 pounds.
What is the electric pole saw to buy?
The best electric pole saw to buy depends on your personal needs and preferences. If you are looking for a lightweight saw with a long reach, the Worx WG309 10-Inch 8-Amp Electric Pole Saw is a great option.
This saw is capable of cutting branches up to 6” thick and can extend up to 8 feet in length. It has a powerful 8-amp motor and an easy-to-use chain tensioning system for improved cutting performance.
For those looking for a more professional-grade saw, the Sun Joe SWJ802E 9 FT 6.5-Amp Electric Pole Chain Saw is a great option. This saw has a cutting bar with a 9-foot reach, and it is capable of cutting branches up to 9.
5-inches thick. It is powered by a 6.5-amp motor and features an auto-oiler system to keep the bar and chain lubricated as you work.
The Remington Ranger II 10-inch Electric Pole Saw is another great saw to consider. It offers a 10” cutting bar, 8 amp motor and extends to 8 feet in length. The Ranger II also features a soft-grip handle and a low-kickback chain for reduced vibrations.
Ultimately, the best electric pole saw to buy depends on what you plan to do with it and how much you are willing to spend. Regardless of which model you choose, you will be able to easily and safely cut branches with minimal effort and in less time.
Is a pole saw worth it?
The answer to whether a pole saw is worth it depends on the individual’s needs. For those who have trees that require trimming and pruning, a pole saw proves to be an invaluable tool. It is great for removing hard to reach branches that are higher up in the tree and can also be helpful when it comes to clearing tight spaces.
Pole saws also tend to be easier to use than ladders, which can be dangerous when cutting branches. They are also generally lightweight, which makes them easier to maneuver. That being said, if the user does not own a lot of trees or does not need to trim branches that are higher up in the tree, then a pole saw might not be worth it.
Can you turn a chainsaw into a pole saw?
Yes, it is possible to convert a chainsaw into a pole saw. To do this, you will need a pole saw attachment kit, which can be purchased from a hardware store or online. The kit will include a pole saw adapter, a saw blade guard, and a pole saw handle that attaches to the chainsaw bar.
You will also need a suitable pole or extension pole that is long enough to reach whatever you need to cut. Once you have all the components, you can assemble them according to the instructions included in the kit.
After doing this, the saw blade should be extended to the desired length and the chainsaw base should be securely attached to the pole. Be sure to follow the instructions that come with your pole saw attachment kit, as well as any safety instructions for your chainsaw.
Once the attachment is attached and the chain is properly tensioned, you should be ready to use your converted pole saw.
How much are pole saws at Menards?
The cost of pole saws at Menards can vary greatly depending on the features and brand. Basic models with less features can cost around $40, while more advanced models with additional features can range from $99 to $500 or more.
Menards also offers a variety of combination kits that include saws, pruners, and other tools, which can be found for anywhere from $149 to $179.
Does Menards carry Poulan chainsaws?
Yes, Menards does carry Poulan chainsaws. They offer a wide selection of Poulan chainsaws with features such as lightweight design, tool-free chain tensioning and automatic chain oiling for improved performance.
All of the Poulan models are designed for comfort and convenience as well as providing power and strength for heavy-duty cutting tasks. There are also several accessories available such as chainsaw cases, saw chain sharpeners, bar and chain oil, and replacement chains.
Menards also has knowledgeable staff in store to help answer any questions you may have or provide advice on the best option for your needs.
What chain goes on Poulan chainsaw?
Poulan chainsaws use a variety of chains depending on the model and style of chainsaw. Along with different chain options that may be used. For example, some models may use a 0.043” pitch chain, while others may require a 0.
058” pitch chain. There may also be different chain gauges and lengths as well, depending on the model. Some Poulan chainsaws may use a Full-Complement chain, which is a chain that has no missing teeth and is designed for heavy-duty applications.
Other Poulan models may use an Low-Kick chain, which is designed for light use and may have missing teeth along the chain. Once you know the model and chain pitch size for your Poulan chainsaw, you can easily find the correct chain for your saw at most home improvement stores or online retailers.
What size chain does a Poulan Pro pr5020?
The Poulan Pro Pr5020 chainsaw uses a 20″ Oregon low-kickback bar and 3/8″ low profile chain. The bar is two-tone plated for durability and features a dual-guard design to reduce kickback. The chain features top-sharpening cutters and LubriLink tie straps that provide a smooth, accurate finish while minimizing kickback.
The guard design is also designed to reduce kickback, providing greater safety and ease of use.
Why are Stihl products not sold at Lowes or Home Depot?
Stihl products are not sold at Lowe’s or Home Depot because these retailers don’t carry a full range of Stihl products. Lowe’s and Home Depot don’t have the capacity to stock and maintain a large selection of Stihl products.
Stihl is a global leader in the outdoor power equipment industry, and their products are available in many different shapes, styles, and power levels. Stihl keeps their product lineup lean by limiting the number of models and features that they offer.
As a result, Lowe’s and Home Depot don’t have room to keep a variety of different Stihl products stocked. Additionally, Stihl products are serviced and sold exclusively by authorized Stihl dealers. Stihl further ensures the quality of their products by having trained technicians evaluating, servicing, and selling their equipment.
By requiring customers to find a local Stihl dealership in their area, Stihl can maintain the highest level of quality control. Therefore, Lowe’s and Home Depot are not authorized vendors of Stihl products, and so they do not stock them or offer them for sale.
Who makes the Troy Bilt chainsaw?
The Troy-Bilt chainsaw is a product of the MTD Products, Inc. Founded in 1932, MTD Products is a world leader in outdoor power equipment with subsidiaries, factories and distribution centers in North America and Europe.
MTD Products’ history of innovation is clouded in the iconic brands of Cub Cadet, Troy-Bilt, Remington and Yard Machines. Their Troy-Bilt chainsaws are designed with quality, durability and innovation in mind.
Troy-Bilt’s selection of chainsaws ranges from entry level to professional grade tools. Entry models are ideal for a homeowner looking to prune trees and bushes while professional models are better suited for larger tasks such as stump removal, large tree cutting and bucking.
The Troy-Bilt line of chainsaws includes plenty of features like gasoline and electric engines, extra features on mid-range models, and an array of safety features for the professional saws.
How do you sharpen a chain saw?
Sharpening a chain saw requires specific tools and knowledge. It is important to use the right tools and to follow the right steps in order to ensure the chain saw is sharpened properly. Best practice is to read the instruction manual that came with your particular chain saw model before attempting to sharpen the chain.
To sharpen your chain saw, you will need the following tools:
-A round file
-A flat file
-A file gauge
-A flat stone
-Chain saw oil
Begin by checking the chain with a file gauge to make sure the depth gauges—the teeth at the top of the cutters—are the proper height. If the gauges are too high, adjust them with a round file. Be sure to keep the file level and only file the gauges, not the cutters.
Once the depth gauges are set correctly, use a flat file to sharpen the cutters. Hold the file against the top of each cutter at the same angle as the depth gauge. Once the file reaches the depth gauge, move the file back and forth across the top of the cutter, from the inside to the outside.
Work on one cutter at a time and try to keep the file evenly flat against the whole cutter.
After filing all the cutters, use a stone to remove any burrs created by sharpening. A flat stone works best, but any stone will do. Hold the stone flat against one cutter at a time and rub it back and forth across the cutter.
Make sure you don’t miss any burrs.
Now you can use chain saw oil to lubricate the chain saw and finish sharpening the blade. Dip the chain saw blade into the oil and move it back and forth to coat it completely with oil. This will help to prevent corrosion and make it easier to sharpen the blade in the future.
It is important to remember to always wear protective gear when sharpening a chain saw. Keep your hands, eyes and face protected from the chain saw, and never try to sharpen a chain saw while it is still running.
Following these steps and using the proper tools will ensure your chain saw is sharpened safely and correctly.
How thick can a pole saw cut?
Pole saws typically have bar lengths of 6 to 10 inches, which allows them to cut through branches up to 4 to 10 inches thick. As long as the branch is within this size range, the pole saw should be able to make a clean cut.
However, some pole saws may come with different cutting lengths, so it’s important to check the specifications of the saw before using it. In addition, another factor to consider when using a pole saw is the condition of the branch; if the branch is green or spongy, then it may be more difficult to cut through, even if it’s within the recommended cutting range of the saw.
Can I cut down a tree with a pole saw?
Yes, you can cut down a tree with a pole saw. The pole saw is a versatile tool that can be used to cut down trees. It has a long saw blade attached to a pole, which allows it to reach higher branches and reach into tighter spaces, making it a great choice for small to medium-sized trees.
To use a pole saw, you need to make sure you’re wearing the proper safety gear like goggles and gloves. Additionally, you should make sure that the work area is properly cleared, and there are no people, pets, or other vehicles nearby.
To start cutting the tree, position your saw at the base of the trunk and start making long, smooth strokes until the tree starts to come down. As always, be sure to follow all safety precautions when operating a pole saw.
How do you cut a limb with a pole saw?
To use a pole saw to cut a limb, first make sure the area is clear and that you are wearing the appropriate protective gear, such as eye protection and work gloves. Stand at the base of the tree and locate the limb you wish to cut.
Extend the saw portion of the pole saw so that it is at least a few feet beyond the limb. Attach the saw to the pole and make sure it is secure. Using two hands, grip the pole saw and cut the limb from the tree trunk, keeping the saw as level as possible.
When you have gone about halfway through the limb, stop the saw and check for any sawdust buildup on the saw blade. If you find sawdust, clear it off so that it does not interfere with your cutting. Continue cutting until the limb breaks off from the tree trunk.
Can I use a pole saw like a chainsaw?
No, you cannot use a pole saw like a chainsaw. A pole saw is designed to prune trees, while a chainsaw is designed to saw through thicker and harder materials such as logs and thick branches. Whereas the chain on a pole saw is thin and weak, the chain on a chainsaw is much thicker and heavier and has greater cutting power.
Additionally, due to the limited reach and design of a pole saw, it is not generally used to saw through logs and thicker branches, whereas a chainsaw is a powerful tool specifically designed to do just that.
Are pole saws hard to use?
Pole saws are generally not hard to use. Depending on the model, most are lightweight and easy to handle. They are also typically equipped with an automatic chain oiler, which helps to ensure the chain runs smoothly and lengthens the tool’s lifespan.
When using a pole saw, it is important to wear protective gear, such as ear and eye protection and cut-resistant gloves. Additionally, make sure the pole saw is correctly assembled and the chain is properly tensioned.
When cutting, keep your balance, use a steady pace, and keep the saw in line with the cut you are making. With practice and safety precautions, pole saws are definitely easy to use.
What is the difference between a pole pruner and a pole saw?
A pole pruner and pole saw are both tools used for trimming and cutting trees and shrubs. The main difference between them is the way in which they cut. A pole pruner uses a cutting blade with a single cutting edge, often in a curved shape, to cut branches.
The cutting blade is moved up and down, by a hand crank or motor, to cut. A pole saw uses a chain-and-bar saw that is operated by a motor or by the user, who pulls on the control bar to create a cutting action similar to a chainsaw.
The pole saw is used to make larger, deeper cuts and can reach higher up branches that may be out of the reach of a pole pruner.
Can you cut wet tree branches?
Cutting wet tree branches can be tricky as wet wood is more likely to splinter or crack than dry wood. That said, if you absolutely must cut wet branches, a sharp saw that has been recently sharpened is the best tool to use.
Even still, use caution and cut slowly, applying an even and steady pressure to the saw. Be careful when cutting branches that are closer to the tree trunk as they are more likely to splinter. Additionally, it is best to only cut branches that are relatively small, as larger branches may present a safety hazard and require the use of a chainsaw.
Lastly, make sure to wear protective gear when cutting wet tree branches and avoid placing your hands in the line of the saw blade, as the wet wood may cause it to kick back.
Why is my pole saw not cutting?
Firstly, the chain may need to be sharpened, or replaced depending on the wear and tear. Additionally, the oil reservoir may need to be refilled or replaced if it’s empty. It is also possible that the chain tension is off, causing the chain to be too loose or too tight, or that the engine speed is too low or too high for effective cutting.
You can also check for debris and obstructions in the bar and chain that could be interfering with the blade’s cutting ability. Finally, make sure the chain is properly seated in the guide bar to ensure that it is aligned correctly.
If you are unable to diagnose the issue yourself, it is best to consult a professional to inspect the pole saw and make sure it is in working order.
