Skip to Content

How much does it cost to build a built in entertainment center?

The cost to build a built in entertainment center can vary greatly depending on the size, materials, and complexity of the design. For a custom, built in entertainment center in your home, you can expect to pay anywhere from $1,000 to over $20,000.

Non-custom, pre-fabricated units may cost less, starting at as low as $500 for basic models with basic materials. Generally, the cost for custom and pre-fabricated units increases with the size and complexity of the unit, and with the higher quality of material used (such as higher grade wood and trim, special hardware, and shelving accessories).

In addition, if you plan to use the services of a professional, you will also need to factor in the labor cost which can be anywhere from $50 to $150 per hour. This is why it is important to speak with a professional before deciding on a design, size, and materials.

They will be able to help you create a unit that fits your budget best.

How do you build a built in wall unit?

Building a built-in wall unit is a great way to add some stylish storage to any room in your home. To build a built-in wall unit, you will need some basic tools, including a saw, drill, level, and measuring tape.

Once you have all your materials ready, you will need to plan out your wall unit. Make sure to measure the area accurately to ensure your wall unit will fit perfectly. Once you have that figured out, you will need to begin cutting your materials for the frame and shelving.

Once your frame and shelves are cut to the desired measurements, you will need to assemble the pieces together. You will want to use screws and possibly a brad nailer to make sure your pieces are securely fastened.

Before installing onto the wall, make sure to use wood glue and clamps to bring the ends together.

Next, you will need to install your wall unit onto the wall. You may need to add some backing pieces of wood to help secure the wall unit in place. Use appropriate screws and wall anchors to make sure your wall unit is safely secured to the wall.

Once installed you can begin to add your finishes. Add some wood trim, paint, veneer, etc. to give your wall unit the desired look.

Once all the pieces are installed, you have successfully created a beautiful built in wall unit.

How do you make a floating media console?

Making a floating media console is an easy and stylish way to provide extra storage and display space for your media and electronics. To make one, you’ll need to choose a sturdy, durable wall-mounted shelf, preferably made of wood, metal, or sturdy plastic.

Make sure the shelf is wider than any device you plan on placing on it, such as a television; you don’t want to take the risk of any electronics tipping off the shelf. To begin the installation process, you’ll want to make sure you have an appropriate power source and ground fault circuit intervention (GFCI) outlet close by.

You’ll also need to purchase a low-profile mounting bracket that is compatible with your shelf.

Once you have the necessary components and all safety considerations have been taken into account, you’re ready to begin assembling your new floating media console! Begin by mounting the bracket to the wall.

Mark two studs in the wall with a pencil, then use a drill, 1/4-inch wood bit, screws, and a stud finder to secure the bracket. To be sure your bracket is mounted securely use a level to make sure the bracket is secure and level.

Next, center the shelf on the brackets and use a drill to secure the shelf in place. To give the shelf a floating effect, accessorize with wall decor and/or flowers to break up the shelf and add a cozy touch.

Finally, connect all the power and audio-visual cables to the back of the shelf and plug it into a nearby outlet. And that’s it! You’re all set to start watching, streaming, and showing off your new and improved floating media console.

How do I hide the wires from my wall mounted TV?

To hide the wires from your wall mounted TV, you will need to gather the necessary materials. These materials will include two-sided tape, zip ties, a drill and screws, and your choice of wall cord covers to hide the wires.

First, use a combination of the two-sided tape and zip ties to securely attach the cables to the back of your TV or entertainment center. This will help keep the cables from slipping out of place. Next, use the drill and screws to install the wall cord cover.

Cut the cover to fit the length of the wires and wall. Then, secure the cover to the wall using the screws provided. Finally, tuck the cords in the wall cord cover to hide them from view.

Is it safe to put TV wires behind wall?

Yes, it is generally safe to put TV wires behind a wall. However, there are some important safety considerations to keep in mind. First, use the appropriate electrical wires that are rated for the power needs of your TV.

Make sure you use the right type of wire, ensuring that the wire gauge is suitable for the power requirements of your TV. Also, make sure to secure the wiring properly in the wall, allowing for adequate slack and distance from other wiring, such as circuit cables and plumbing.

Furthermore, use tamper-resistant electrical outlets for your TV. Finally, once you have installed the wires in the walls, it is important to check your work with a multimeter to make sure that you have wired it correctly and that you have no exposed wiring.

If you have any doubts about the safety of your wiring, it is best to have an electrician evaluate your work and advise you on the safest solution for your home.

How can I hide my TV cords without cutting the wall?

One of the most effective ways to hide TV cords without cutting the wall is to use cord covers. These are usually made up of a plastic or fabric material that can easily be wrapped around the TV cords and secured with a zip tie or Velcro.

The cord covers come in various colors and sizes, so you can choose one that best matches your wall color. Another option is to use cord raceways or wiremolders. These will effectively hide the cords and also provide a nice, neat appearance.

There are also a number of wall-mounted cord organizers on the market. These are usually quite easy to install and will usually fit snugly between the wall and the TV, hiding all the cords while still leaving easy access to them.

You can also hide the cords behind furniture, such as bookcases or cabinets. This will not only hide the cords, but also make your interior look more refined and tidy.

Is it OK to put a TV above the fireplace?

Putting a TV above the fireplace can be OK, but there are certain factors to consider before doing so. One of the main considerations is heat. Putting a TV too close to the fireplace can expose the TV to excessive heat, which can damage both the TV and the fireplace, potentially resulting in a fire hazard.

Additionally, it may be difficult to find the correct angle to watch the TV comfortably because of the distance and the angle of the fireplace. To prevent TV overheating and to make sure the TV can be viewed comfortably, the TV should be securely mounted either a few inches above the mantel, or ideally further away from the fireplace on the wall at a comfortable viewing angle.

Ultimately, whether it is OK to put a TV above the fireplace will depend on the setup of the room and requires careful considerations to ensure it is done safely.

What can I use instead of an entertainment center?

You can use a variety of different furniture pieces instead of an entertainment center. For example, if you have limited floor space, you could choose a wall-mounted media console or floating shelves.

Console tables can provide additional storage and display options, while bookcases and armoires provide more space and flexibility. If you are looking for something with more of a statement, you could use an old dresser and line it with vintage items or decor.

If you want an easy, adjustable solution, an entertainment unit with built-in TV stands is also an option. Finally, if you would like to completely get rid of an entertainment center, a credenza or sideboard with a TV mounted above it can provide an eye-catching design while still providing ample storage and style.

How can I make a cheap TV stand?

Making a cheap TV stand can be an easy and budget-friendly project. All you need are some basic materials such as wood, glue, screws, and paint. Here is a step-by-step guide on how to make your own TV stand:

1. Decide what size, shape, and style of stand you would like. Measure your TV to make sure the stand will fit properly and will be able to support the weight of the TV.

2. Gather the materials you will need. You can purchase a pre-cut piece of wood from the hardware store, or you can cut your own using basic equipment like a handsaw or circular saw. You will also need a few screws, wood glue, and paint to finish the look.

3. Once you have the materials, assemble the stand. Start by attaching the sides and the top of the stand using screws and wood glue. This will help make the structure strong and secure.

4. Add vertical supports in the back for even more strength. These supports will make sure the TV stand can hold up the weight of the television.

5. Paint or stain the stand to give it a finished look. You can also choose to distress the wood and use a sealant to make it look more rustic.

Making a cheap TV stand can be a fun and easy project that is budget-friendly and rewarding. Make sure you properly measure your TV and assess the weight to make sure the stand is safe and secure. With the right materials and assembly steps, you can create a beautiful homemade TV stand.

How do you make a TV cabinet?

Making a TV cabinet is an involved process, but it can be done with some patience and the right tools. Before starting, make sure you have the supplies you’ll need, like a saw, drill, drill bits, tape measure, clamps, and L-brackets.

You’ll also need wood for the frame, shelves, and trim.

The first step is to decide on the size and style you want for the cabinet. When you know the dimensions, you can start cutting the wood for the frame. Cut two pieces for the top and two for the sides, ensuring they’ll fit together with a snug fit.

Once the pieces are cut, join them together with wood glue and L-brackets for extra stability.

Next, you’ll need to cut the shelves according to their desired dimensions. Measure their width, length, and depth before moving on. The shelves can now be attached to the frame, either with glue and nails or with pre-made shelf pins.

If you have the correct drill bit, you can also make shelves that slide in and out.

The final step is to attach trim pieces to the top, side, and front of the cabinet. You can use nails or screws to secure them, as well as more wood glue and L-brackets. With the trim in place, you can then paint or stain the cabinet with the colours or style of your choice.

Making a TV cabinet is a complicated process, but with the right tools and some patience, you can build a beautiful piece of furniture for your living space.

How do you prop a TV without a base?

You can prop a TV without a base, but you’ll need to use a stable mount device to secure the TV safely in place. You’ll also need to make sure the mounting device is secured to a wall stud or other secure surface to ensure the mount and TV are stable.

When mounting the TV to the wall, make sure to consult the manufacturer’s instructions and follow their recommended steps.

If you don’t have the correct mount or tools to mount it to the wall, you can also use furniture to prop up the TV. Sturdy furniture such as a bookshelf, sideboard, or media console can make a good base for a flat-screen TV.

Make sure to adjust the furniture height to your ideal viewing position, allowing plenty of space for the TV’s ventilation. Additionally, if you’re planning to put a soundbar or other equipment beneath the TV, you’ll need to make sure there is sufficient space between the two.

Finally, make sure to secure your TV with a strap or other safety device to the furniture to avoid falls.