The cost to build a two story fireplace will vary depending on the type of fireplace you are looking to install, the size and complexity of the project, and where it is being built. Some of the costs you could expect include the cost of the materials, labor, and permits that might be required.
The type of fireplace can significantly impact the project budget, as traditional wood burning fireplaces are typically less expensive than gas burning or electric fireplaces. You may also need to consider additional features such as a chimney, brick or stone surround, and any special details you may want to add.
Labor costs for a two story fireplace installation can range from a few hundred to several thousand dollars depending on the complexity of the project. Building a two story fireplace can also require specialized permits depending on the local regulations in your area, so these costs must also be considered.
Ultimately, the cost of building a two story fireplace can range greatly depending on the specifics of the project, but it is safe to say that this project can easily cost several thousand dollars.
Can you have gas fireplace on the second floor?
Yes, you can have a gas fireplace on the second floor. However there are several important considerations to keep in mind. Depending on the situation, there may be local code requirements that must be met in terms of clearances and venting.
The fireplace would likely need to be vented through the roof in order to carry away the toxic flue gases and prevent them from entering the interior of the home. It is also important to ensure that the gas supply is accessible and that there is adequate structural support for the fireplace to ensure its safe installation on a higher floor.
Additionally, depending on the type of fireplace you select, you may need to allow for depth or height considerations when selecting or framing the unit. Finally, you may want to consider insulation to maintain the temperature of surrounding walls or to prevent unnecessary heat loss.
Taking all of these considerations into account, it is possible to install a gas fireplace on the second floor.
How many fireplaces can a house have?
It depends on the size of the house and preferences of the homeowner. Generally, a house can have anywhere from one to several fireplaces. For small homes or apartments, a single centrally located fireplace is common.
For larger homes, the sky is the limit. We have seen homes with multiple fireplaces in a single room, as well as several fireplaces throughout the house. Ultimately, it depends on how the homeowner would like to integrate a fireplace into their home design.
For example, a fireplace can be modern and used as a piece of artwork, or have a more traditional style with a decorative mantle.
Can two fireplaces share the same flue?
Yes, two fireplaces can share the same flue, but there are a number of factors to consider before attempting this. If the existing flue system is in good condition, then it is possible to use a single flue system for two fireplaces.
However, this should only be attempted with the assistance of a qualified and experienced chimney technician. They will evaluate the flue system, the volume of air necessary for proper ventilation and oxygen supply, as well as any other variables that will affect the performance of the fireplaces.
Additionally, if both fireplaces burn wood, the chimney technician may recommend that a capped-off flue liner be installed in order to improve combustion efficiency. All of these factors must be considered before attempting to share a single flue between two fireplaces.
Does adding a fireplace increase home value?
Adding a fireplace to a home can definitely increase its value. Not only is it great for the atmosphere and the comfort of the house, but it can also add a great deal of value to the home that prospective buyers or renters may be looking for.
Fireplaces tend to attract buyers because of the visual aesthetic it adds to a space as well as its energy efficiency and cozy feel. Furthermore, having a fireplace installed can also add a unique feature to a home and stand out from the pack as well as attract more potential buyers interested in a rustic, homey atmosphere.
Additionally, potential buyers may view a fireplace as a major cost savings in the long run as it helps eliminate heating expenses throughout the winter. Finally, fireplaces can also add great character and charm to an otherwise plain room.
As a result, having a fireplace installed can add both aesthetic and financial value to a home.
Can you get carbon monoxide poisoning from a fireplace?
Yes, you can get carbon monoxide poisoning from a fireplace. Carbon monoxide is an odorless, colorless gas that is produced by burning wood, coal, charcoal, and other combustible materials. When these materials do not burn completely, they can produce high levels of carbon monoxide.
If the fireplace is not properly vented or is blocked with debris or other combustible materials, the levels of carbon monoxide in the room can become dangerous. Inhalation of carbon monoxide can cause mild to severe symptoms such as headaches, dizziness, confusion, chest pain, nausea, and vomiting.
In extreme cases, it can even cause death. It is important to have your fireplace inspected and cleaned regularly by a professional to prevent the buildup of carbon monoxide. You should also have a carbon monoxide detector in the same room as the fireplace to alert you if the levels of carbon monoxide become too high.
How many wood burning fireplaces can share a single flue?
It depends on the size of the flue and the size of the fireplaces. Generally speaking, a single flue can accommodate between two and four wood burning fireplaces, as long as all of them are compatible.
When two fireplaces are connected to the same flue, they should draw equally, so both should have the same height and be constructed of the same exact parts. The size of the flue should be larger than that of either individual fireplace in order to handle the additional exhaust gases generated by both fireplaces and ensure there is sufficient draft.
Also, the size of the flue should be determined by the amount of exhaust produced by both fireplaces, since too small a flue can impair the operation of a fireplace, while too large a flue may draw too much smoke, resulting in a smoky fire.
Does each fireplace have a separate flue?
The answer to this question depends on the type of fireplace you have. If you have a masonry fireplace, then you most likely have a single, dedicated flue connected to the chimney. If you have a prefabricated or a direct-vent fireplace, then it may be equipped with two flues, one for pollutants such as smoke and carbon monoxide, and one for combustion air.
Additionally, prefabricated fireplaces may also be designed with a single flue to provide superior energy efficiency. It is best to consult with a certified chimney sweep or your local building code enforcement office to determine if your fireplace and flue combination is up to code.
Can two wood stoves share a flue?
Yes, two wood stoves can share a flue as long as it is adequately sized with two liners. It is important to size the flue according to the requirements of the two stoves, either with one double wall flue, two single wall flues, two stove blower-connected flues, or two separate masonry flues with double walls.
A flue is used to route the combustion gases from the wood burning stove or fireplace up and out of the building. It is important to have a correctly sized flue to safely remove the fumes created by burning wood.
If the flue is undersized, the fumes can build up in the house and cause a health hazard. When determining the size of the flue needed to accommodate two wood stoves, the manufacturer’s specifications should be followed and the sizing should be based on both the linear feet of piping and the inner diameter of the piping.
If the flue is not sized properly or installed correctly, it may not sufficiently remove the smoke and carbon monoxide created by burning wood, resulting in a possible dangerous build-up in the home.
Therefore, it is important to hire a certified chimney sweep or professional installer to properly size and install the flue for two wood stoves.
How do shared chimneys work?
Shared chimneys are a common practice when two, or multiple fireplaces are located adjacent to each other. This is not an ideal set up, as the shared chimney will typically require additional maintenance and cleaning protocols.
A shared chimney works by combining multiple flues into a single chimney, often located in the middle of two, or multiple fireplaces. This type of setup will typically require a masonry liner be built out of clay tile; the liner works by preventing smoke and other emissions from the other fireplaces from entering the chimney.
Once the chimney liner is in place, a two-way damper must be installed so that each fireplace can be closed independently of the others. This two-way damper allows for the fireplace to be opened or closed without disrupting the flow of air or smoke out of the other fireplaces.
The last and most important aspect of setting up a shared chimney is creating a liner that snakes through the chimney, getting as close to the firebox as possible. This liner acts as a barrier and ensures that smoke and other particles created in one fireplace do not cross over into the other.
The liner also helps to maintain the air pressure in the chimney, thus keeping the smoke and other emissions flowing out.
Having a shared chimney can both have advantages and disadvantages, as it requires more maintenance and cleaning than a single chimney. Additionally, while it can save on construction costs, there is also the potential for smoke and other particles to come out of one fireplace and enter into the other.
With proper maintenance, however, a shared chimney setup can be both effective and efficient.
What do you put on either side of fireplace?
On either side of a fireplace, you can place a variety of items to complement your decor and bring a sense of coziness to the room. Popular design elements include bookcases, paintings, and statues. You can also consider adding attractive and functional items such as built-in shelves with baskets or cubbies to store items, small cabinets to store items or knick-knacks, and television consoles with cabinets.
If you have an electric fireplace, you can add bookshelves to display your favorite books, photos, and art. Additionally, an occasional chair or two, an ottoman, or a throw rug can add to the comfort of the room.
For a more modern fireplace, you can use a mantel to highlight your decor and add texture, using accessories such as oversized house plants and candles to create a warm glow. Whatever you choose to place beside your fireplace, make sure it complements the style of your home and is functional for your needs.
How do I make my fireplace look cozy?
Making your fireplace look cozy is fairly straight forward. The first step is to add an element of warmth. This could be done by finding a piece of furniture such as an armchair or an ottoman and placing it near the fireplace.
A rug can also help add warmth to the space by softening the flooring underfoot. For an even cozier feel, you can hang blankets, pillows and throws over the furniture and around the fireplace to add an inviting feel and a layer of texture to the space.
Adding lighting with lamps or sconces can also help to create a warmer atmosphere. If there is a mantel, consider decorating it with candles and other decorative items like books and vases. You can also display family photos, artwork or vintage finds to add warmth and personality to the space.
Plants are also a great way to make your fireplace look cozier — they add color, texture and life to the space. Finally, adding a bowl of scented potpourri or diffuse an essential oil to give the space a warm and inviting scent.
Do you need tile on floor in front of fireplace?
Whether or not you need tile on the floor in front of the fireplace is really up to personal preference. The tile could make the area more aesthetically pleasing and give a nice finished look for the space, however without tile the floor can still look nice and even still be easy to clean.
A con of having tile though is that it can become extremely hot when exposed to a lot of heat, so installing tile directly in front of the fireplace is not recommended and if you choose to have tile it should be at least a few feet away from the source of the heat.
If you feel that having tile would be right for the space and you don’t mind potentially having to shell out a bit more money for the installation, then it could be a great addition!.
What is a fireplace hearth?
A fireplace hearth is a part of the fireplace that serves as a base or platform for the fire. It is typically found directly in front of the fireplace and is usually made of stone or brick. Fireplace hearths play an important role in a fireplace setup as they provide an extra layer of protection from the heat of the fire that would otherwise be felt by the person standing in front of the fire.
Some hearths have additional features, like a raised edge to contain ash, soot, and debris from falling onto the floor. Hearth designs vary based on the style of the fireplace, but all fireplace hearths play a crucial role in protecting the floor, walls, and other objects from being damaged due to the intense heat of the fire.
What is the material to surround fireplace?
The material used to surround a fireplace typically depends on the type of fireplace you have and the area in which it is located. For instance, if you have a traditional brick fireplace, you’ll likely want to go with something that complements the brick look, such as a mantel made of wood or stone.
If a fireplace is located in a more modern setting, a tile or metal surround might be a better option. Other popular materials used to surround fireplaces include marble, concrete, slate, and ceramic tile.
When deciding which material to use, you’ll want to consider factors such as the cost, maintenance needs, and aesthetics. Though often expensive, natural stone is an excellent choice because it adds a classic, timeless look to the area and is incredibly durable.
As an alternative, manufactured stone is an affordable option that offers the same look with less work. For a more modern look, consider stainless steel, glass, or stone composite panels.
When it comes to safety, you’ll also want to factor in the materials’ heat resistance. Materials that are too flammable or heat absorptive can create a fire hazard and should be avoided. Proper insulation should also be considered for fireplaces with a gas or woodburning insert since these can become very hot.
Lastly, make sure to enlist the help of a qualified professional if you plan to perform any complicated installation or repairs.
What type of fireplace is most popular?
The type of fireplace that is most popular depends on various factors such as climate, personal preference, budget, and aesthetics. In traditionally colder climates, wood burning fireplaces are the most popular type due to their warmth and efficient fire output.
For a more modern look, gas fireplaces are becoming increasingly popular as they provide convenience and energy-efficiency. Electric fireplaces are also becoming more popular due to their low cost and ease of installation as they require no venting and any existing wall outlet can be used as a power source.
Ultimately, the type of fireplace that is most popular is that which best meets the needs and personal style of the individual.
How do I choose a fireplace surround?
Choosing a fireplace surround requires careful consideration of your home décor and style. When selecting a surround, you’ll want to think about the materials, design, size, and installation of your new fireplace feature.
Materials: Fireplace surrounds can be made from various materials including wood, stone, brick, and various synthetic materials. When selecting a material, think about how it will tie into your home décor and pick something that will both look good and hold up well.
Design: Fireplace surrounds come in a variety of designs, from classic to contemporary styles. The design you choose should complement the other elements in your room, such as the window treatments, furniture, and flooring.
Size: You’ll also need to consider the size of the fireplace surround, which will depend on the size of your fireplace. Measure the dimensions of your fireplace, and then make sure to choose a surround that will fit correctly.
Installation: Make sure to think about the installation of your fireplace surround as well. Some surrounds include built-in mantels and require professional installation, while others are designed to be installed as DIY projects.
If you plan to install your surround as a DIY project, think about the tools you’ll need and if you’ll be able to complete the task before purchasing.
By considering these different factors when shopping for a fireplace surround, you can ensure the look and function of your surround suits your home décor and style.
