Skip to Content

How much does it cost to replace kitchen drawers?

The cost to replace kitchen drawers can vary depending on the size, type, and material of the drawers being replaced. The most economical option is to purchase ready-to-assemble kitchen drawers, which can be found at most hardware stores and home improvement stores.

The cost of ready-to-assemble drawers typically range from $150 to $400 depending on the size and style, although more expensive options are available. Pre-assembled kitchen drawers can cost anywhere from $500 to $4,000, depending on the size and quality of the drawers.

Additionally, custom made drawers can range from $350 to $2,500 plus the cost of installation. For those looking to update their kitchen without spending a fortune, purchasing updated drawer handles and drawer knobs can be an inexpensive way to give an existing set of drawers an entirely new look.

Can I replace my kitchen cabinet drawers?

Yes, you can replace the kitchen cabinet drawers. Depending on what type of drawers you currently have, and the size of the drawers, this may require some professional help. If the drawers are standard sizes, you can typically purchase new drawers and install them yourself.

Ensure you measure the drawers accurately, and check measurements against the replacement drawer sizes available. Check that the drawers you purchase match up with your current cabinet design, material and finish color.

When purchasing, consider replaceable parts or soft-close mechanisms. Before attempting to replace your kitchen cabinet drawers, it’s best to check with a professional for advice and assistance, especially if you are unsure about any measurements or installation steps.

Can you replace drawer slides on old cabinets?

Yes, you can replace drawer slides on old cabinets. However, it’s important to make sure that you are replacing the slides with the same type and style of slides as the original set, or the drawer may not fit properly.

Additionally, it is good practice to measure the original slides before going to the store in order to make sure you get the right size and that the slides will fit into the existing tracks in your cabinet.

Depending on the type of slides you have, you may need to remove the entire drawer before you can remove the slides and replace them. Once the slides are removed, you can mount the new slides into the tracks on the cabinet frame.

Finally, be sure to check that the drawer fits snugly into the new slides before securing them.

How do I find a replacement drawer?

Finding a replacement drawer can be a relatively simple task, depending on the type of drawer you need. If you are looking to replace a standard drawer, then it is generally quite easy to do. The simplest way is to visit a local hardware store or home improvement store and purchase the appropriate size and type of drawer.

If the drawer you need is a specific size, it may require some research to find an exact match.

You may also try online, as there are many retailers who specialise in replacement drawers. Websites such as Amazon, Wayfair and Overstock may be good places to start. Online retailers often have a wider selection of drawers, so it may be easier to find exactly what you need.

If you know the manufacturer and model of the drawer, you may be able to get a specific match from the manufacturer itself.

In the case of antique furniture, it can be more difficult to find the exact match for a drawer, as they are often made with unique designs. Here, you may need to contact a specialist, or search through antique furniture stores and websites.

They may be able to source a specific turnover drawer, or a specialist restorer may be able to replicate the existing piece.

What are the different types of drawer slides?

Drawer slides are essential hardware pieces used to open and close drawers or drawers while providing cushioning, load support, and stability. There are three types of drawer slides: ball bearing slides, roller bearing slides, and the soft-close slides.

Ball bearing slides are characterized by two rows of ball bearings integrated into the slide, providing it with superior extension and easy opening and closing ability. Ball bearing slides are particularly effective for broader drawers as they provide plenty of support for heavier items.

Roller bearing slides, also known as telescopic slides, feature several roller bearings along the length of the slide, creating a stable environment and allowing for greater weight capacity. Roller bearing slides are usually thicker than ball bearing slides and can support a wider drawer base.

The last type of drawer slides available is soft-close slides. A damping mechanism is utilized to avoid slamming drawers shut and make their use quieter. A great benefit of using these slides is that they are suitable for both lightweight and heavyweight drawers.

In conclusion, the three types of drawer slides available are ball bearing, roller bearing, and soft-close slides. Each type of slide provides different features and allows for various capacity and stability levels.

Knowing the differences between each type of drawer slide is essential for picking the one that best suits your project.

What is the cheapest way to do kitchen cabinets?

The cheapest way to do kitchen cabinets depends on a variety of factors, such as the type of cabinet you want and the materials used. For instance, if you opt for a DIY route, then MDF (Medium Density Fibreboard) is a relatively cheap material that can be used for cabinet doors, frames and boxes.

This can be more cost effective than solid wood, which can be expensive. Alternatively, you could check out budget-friendly suppliers such as IKEA, B&Q or Argos, who offer ranges of ready-assembled cabinetry in different finishes.

If you’re confident in your DIY skills, then you could buy flat pack cabinets and assemble them yourself. You should also check sellers who specialise in second-hand liveks, as there may be bargains to be had.

Finally, use a cost-comparison website to compare the different cabinets and explore bulk discounts wherever you can.

Are custom built cabinets more expensive?

Custom built cabinets are typically more expensive than standard cabinet options that are available for sale at home improvement stores, as they provide a higher level of quality, durability and customization.

Custom cabinets are crafted to the exact size and style that you want, which typically requires a higher level of craftsmanship and materials than a standard pre-built model. Depending on the size, species, and style of the cabinets, materials and labor can range from moderate to expensive.

Custom cabinets may include additional features that are not typical of standard pre-built models, such as larger drawers, special drawer organizers, and doors with raised panels. Additionally, custom cabinets may come with a variety of finishes that must be applied correctly, which can add a level of cost and time.

Custom cabinetmakers may also charge a fee for design, while a pre-built cabinet generally comes pre-designed and ready to be installed in the kitchen.

How can I save money on custom cabinets?

First, you should shop around and compare prices. It’s a good idea to compare quotes from several different companies to find the best price. You should also consider doing some of the work yourself as some vendors may offer a discounted rate if you are willing to assist with the installation.

You can also look for sales and special offers or try to catch a deal during non-peak times when demand is lower. Another way to save money on custom cabinets is to only purchase the bare necessities.

Cabinets are typically sold in standard sizes, so buying custom cabinets only for those areas where you need something unique can help you save money. Additionally, shopping online and buying from a wholesaler can help you reduce costs.

Lastly, you can use salvaged cabinets or stock cabinets for parts of the kitchen to help keep costs down.

What’s the wood to make cabinets out of?

Most commonly, hardwoods such as maple, cherry, oak, birch, hickory, and walnut are used for the construction of kitchen and bathroom cabinets. Softwoods such as pine, cedar, and fir are also occasionally used, but tend to be much less durable than hardwoods and are often used only for decorative purposes.

Many companies also create cabinets with engineered wood, such as mdf, particle board, and plywood. They can be more affordable than all-wood cabinets, while still providing good strength and decent longevity.

When it comes to cabinet construction, however, the contemporary trend is moving away from all-wood cabinets and towards a combination of different materials, such as metal, glass, and plastic. There are a wide variety of options available, so research your options and decide based on the look you’re trying to achieve, budget, and the overall level of durability you want.

What are cheap kitchen cabinets made of?

Cheap kitchen cabinets are often made of engineered wood products such as particle board, plywood, medium density fiberboard (MDF), and laminate. These materials are less expensive to manufacture and have the advantage of being lightweight and easy to install.

However, they do not have the same structural integrity or longevity as traditional hardwood cabinets. Engineered wood products are prone to warping and chipping, and they require careful maintenance to extend their lifespan.

For instance, they should be regularly sealed with a waterproof finish to prevent moisture damage. Additionally, they may be susceptible to warping or crushing if they are not well-supported.

Is plywood better than solid wood for cabinets?

The choice really depends on your individual needs and preferences.

Solid wood offers a beautiful, natural look that can last for many years if it is properly cared for. It is typically more expensive than plywood, but its durability and luxurious look often make up for the cost.

Plywood is also a good option for cabinets, as it is often less expensive and very strong. However, it is less durable than solid wood and may not last as long. It also may not look as attractive.

In the end, the best material for your cabinets depends on a variety of factors, such as your budget, the style you want, and the level of care that you are willing to put into them. If you want something more affordable and sturdy, then plywood may be the best option.

If, however, you are willing to pay a bit more for something that is more attractive and of higher quality, then solid wood may be the better option.

Which brand cabinet is best?

It really depends on what type of cabinets you’re looking for and what factors are most important to you. If you’re looking for the most durable cabinets, then brands like KraftMaid and Wellborn offer some of the best quality construction with solid wood and durable finishes.

If price is the most important factor, then brands like Home Depot and Lowes offer lower cost options with fewer customization capabilities. If you want to customize your cabinets, then brands like IKEA and Cymax offer hundreds of style and color options to choose from.

Ultimately, the best cabinet brand for you depends on your budget, style preferences, and needs.

What type of wood is cheaper for cabinets?

For most projects, plywood is cheaper than solid wood when it comes to cabinets. Plywood is made with thin sheets of wood veneer glued together to form a sturdy material. It is usually less expensive than solid wood due to the fact that it requires less labor and material to produce.

Plywood also tends to be more stable than solid wood, which can be beneficial in a high humidity environment such as a kitchen. Additionally, plywood is available in a variety of different finishes and thicknesses, allowing you to choose the right type for your project at a more affordable price.

Can drawer fronts be replaced?

Yes, drawer fronts can be replaced. This is a cost-effective solution for getting a fresh look for your kitchen or bathroom. Replacing just the drawer fronts is typically much less expensive than replacing the entire cabinet, as drawer fronts are relatively easy to remove and replace.

With some guidance and a bit of patience, replacing the fronts of your drawers is a job that most people can do themselves. First, the old drawer fronts need to be removed, either by unscrewing them from the face frame or simply prying them off.

Measurements should be taken to be sure that the new drawer fronts fit properly and are level when they are replaced. Installation of the new drawer fronts is as simple as screwing or nailing them into place.

In some cases, holes have to be drilled to account for differences in the style or thickness of the new door. Finally, the drawer fronts should be sanded and stained or painted to match the rest of the cabinetry.

Can you just buy cabinet fronts?

Yes, you can just buy cabinet fronts if you only need to replace the front of your cabinets. This is a popular option if you are looking to upgrade the look of your kitchen without having to replace the entire cabinet.

There are a wide range of cabinet front styles, colors and materials to choose from. When purchasing cabinet fronts, you need to measure them to make sure they will fit your cabinets and you also need to decide on the type of material you prefer for your cabinet fronts.

Additionally, there are some companies that also provide matching side and/or end panels so you can create a complete look for your kitchen. If you are looking to save on cost, you can install the cabinet fronts yourself.

However, if you are not comfortable doing this, you can also hire a professional to install them for you.