Skip to Content

How much does it cost to shiplap a garage?

The cost to shiplap a garage can vary significantly depending on the size of the garage, amount of shiplap needed, the tools used, and the cost of the materials. Most basic shiplap installation can range from $550 – $850 for a single car garage.

Generally, the bigger the space, the more expensive it will be – two car garages can cost upwards of $2,000.

The cost of materials needed will also affect the total price of the project. To cover a single car garage typically require 25-30 sheets of shiplap, and each sheet of shiplap can cost anywhere from $5-$25 per sheet with the average being around $14 per sheet.

The total cost of materials needed can range from $125-$750 depending on the type of shiplap you end up using.

If you have the necessary tools and experience, you could potentially save money by taking on the project yourself. However if you are hiring someone to install the shiplap, the total cost of the project will increase significantly.

A professional with the right tools can also get the project done in a much shorter amount of time.

Overall, the cost of shiplapping a garage can range from a couple hundred dollars to several thousand dollars depending on the size, tools needed, and cost of materials. It’s important to take into account all of these components when determining the total cost of the project.

Can you put shiplap over concrete?

Yes, you can put shiplap over concrete. The key is to use a moisture barrier to protect the wood from coming in contact with the concrete, which can cause damage over time. You’ll need to apply a layer of rigid foam insulation board to the concrete before attaching the shiplap.

This adds an extra layer of protection to prevent moisture from harming your shiplap over time. It’s also important to use the appropriate screws, nails, and adhesives to ensure the shiplap stays firmly in place.

While it is possible to put shiplap over concrete, it’s not recommended since it can decrease the lifespan of the shiplap due to water damage and mold growth.

What is the cheapest way to finish a garage wall?

The cheapest way to finish a garage wall is to use materials that are affordable and accessible. Depending on the size and scope of your project, there are a number of different routes you can take.

If you’re looking for a cost-effective and low-maintenance solution, drywall is a great starting point. It’s relatively inexpensive and can be painted to match the color and decor of the rest of your garage.

You may also want to consider plywood; while it may not be as durable as drywall, it’s still an affordable option for covering walls.

Another cost-effective solution for finishing a garage wall is beadboard paneling. Beadboard paneling comes in a variety of colors and styles and it’s easy to install due to its tongue and groove design.

Finally, consider adding some unique wall accents to add texture and color to the walls. Consider things like paint chips, wallpaper, tiles, or wall decals. They may be a bit more costly upfront, but they can spruce up a garage wall and make it truly unique.

Overall, the cheapest way to finish a garage wall will depend on your personal tastes, budget, and the scope of the project. However, with a bit of research, you should be able to find an inexpensive solution that meets your needs.

Do you need drywall behind shiplap?

Yes, you typically need to use drywall behind shiplap to provide support for the wall. If left alone, shiplap walls can easily become damaged, sag, or crack. Installing drywall behind shiplap helps protect the wall and create a more secure and solid construction overall.

Drywall also helps to provide insulation and minimize sound, which can be very beneficial when shiplap is used in areas such as bedrooms and bathrooms. Additionally, drywall provides an even wall surface that paints and other wall treatments adhere to more easily.

Overall, using drywall behind shiplap is an important step in ensuring that your shiplap wall looks great and remains structurally sound for years to come.

Is shiplap cheaper than drywall?

It depends. Generally speaking, shiplap is more expensive than drywall because it is more labor intensive to install and often requires more materials. The additional cost associated with shiplap is generally offset by its classic appearance and durability.

In general, purchasing the board and materials necessary to install a wall of shiplap will cost more than the equivalent drywall installation. Labor associated with either installation can also vary depending on a variety of factors, such as geographical location, contractor availability and overall complexity of the project.

Installing shiplap may also require specialized tools, such as a miter saw, that add to the cost. That said, there are cost-effective options available when it comes to shiplap, such as pre-painted boards that reduce the need for on-site painting, as well as budget-friendly plywood alternatives.

And ultimately, your budget and project goals will determine the best path for you.

How do you make homemade shiplap?

Making homemade shiplap is a great way to add a rustic, coastal charm to any space. To create your own shiplap, start by measuring your wall and deciding on the dimensions of your panels. You’ll need enough material to cover your wall area plus a couple of extra inches at each end.

Next, find a wood of your choice, like pine, whitewood, or cedar. These woods are fairly lightweight and make for easy cutting. It’s important to make sure that your wood is kiln dried to make sure there’s less chance of it cupping or warping with age.

Once you have your boards ready, use a table saw to make the necessary cuts. For a more uniform look, you can also use a router to create a groove at the edges of each board. The depth of the channel should match the thickness of your boards.

Use a set of clamps to hold the boards in place while you nail them to the wall. You’ll want to be sure to use finish nails and make sure to drive the nails deep enough so that they won’t accidentally pop out.

Once the shiplap is in place, use wood putty to fill any holes or gaps that may be present. After the putty is dried, sand the boards to give them a smooth finish. Finally, for increased protection and to create a water-resistant barrier, you may want to add a sealant to your shiplap.

With a few tools and some simple steps, you can easily create your own rustic and charming homemade shiplap!.

What can I use for faux shiplap?

There are a variety of materials you can use for faux shiplap. Plywood planks are a cost-effective choice for covering wide expanses of wall. They come in a variety of sizes, including 1/4-, 1/2-, and 3/4-inch thicknesses.

To complete the look, you can paint or stain the planks and then attach them to the wall with adhesive or nails.

Another option is to purchase pre-made shiplap boards. These boards are a bit more expensive than the plywood, but they often come pre-painted in a variety of colors and styles. They also come with a tongue-and-groove pattern that makes installation faster and easier.

You can also use other materials like PVC moldings and wall panels to achieve a shiplap look. These options are lightweight and easy to install, but they can be more expensive.

No matter which option you choose, faux shiplap is a great way to create a distinctive, eye-catching look for your home. It’s a fairly simple project that can be done in a short amount of time, and it’s sure to make a big impact.

Can you make your own shiplap?

Yes, you can make your own shiplap! It’s a great option if you have a specific look you’re after or if you’re on a budget. DIY shiplap involves taking long, thin planks of wood, such as pine or cedar, and nailing them up onto your wall.

You can paint the planks to match the decor of your space or you can leave them natural for a more rustic look. Be sure to leave equal sized gaps between each plank and use a level to ensure your shiplap is even.

For a more finished look, you can add trim around the edges. If you’re not proficient in woodworking, this project may take some time, but it is well worth the effort!.

What is the material for garage walls?

The material for garage walls typically depends on the purpose of the garage being constructed. For more basic garages, a combination of interior drywall and insulation works well to provide protection from the elements.

Using a combination of different building materials such as plywood, concrete board, and insulated panels can also provide added insulation and protection. Additionally, if high humidity is a concern, moisture-resistant wall materials such as vinyl-covered drywall should be considered.

For high-traffic garages where impact protection is important, stone, brick, or concrete blocks should be used. To help resist moisture and mold growth, seal any material that is vulnerable to water such as insulation and drywall before covering with paint or a moisture barrier such as plastic sheeting.

Is plywood good for garage walls?

Plywood can be a good option for garage walls. It is versatile, affordable, and easily accessible, making it a popular choice for many projects. Additionally, plywood is usually treated to make it moisture and rot-resistant, making it ideal for use in garages.

It is also easy to install, even for a beginner DIYer, with the proper supplies and tools. You can also add a protective finish such as paint and sealant to help make the material even more durable and resistant to moisture.

Furthermore, plywood is lightweight yet strong and provides a good amount of insulation and soundproofing. Ultimately, plywood can be a great choice for garage walls, with the right research and preparation.

What should I line my garage walls with?

When lining your garage walls, the most important factor to consider is the material you want to use. Different materials will offer different levels of protection, durability, and style. Some popular materials for lining garage walls include gypsum board, plasterboard, and metal siding.

Gypsum board, also known as drywall or sheetrock, is a relatively inexpensive material that’s easy to install. It can help protect your walls from small impacts, but won’t be too resilient against heavy items.

It’s also good at creating a separation between living areas, limiting noise and temperature levels.

Plasterboard is a more durable material that offers greater levels of protection against impacts. Additionally, it’s more fire-resistant than gypsum board, providing extra peace of mind. It’s a great material to use if you’re using your garage to store dangerous items.

Metal siding is a great material to consider if you want to create a more rugged look that blends in with the outdoors. It can offer the same level of protection as plasterboard, while having the added benefit of an aesthetic quality too.

It also offers good sound insulation from traffic on the street.

Ultimately, the material you choose will depend on the purpose of your garage as well as your budget. Installing a liner for your garage walls is an excellent way to protect your garage and maximize its usefulness, so make sure you make the correct choice!.

What can I use instead of drywall in garage?

One of the most common alternatives to drywall in a garage is plywood. Plywood is often chosen for garages because it is cost effective, easy to install, and highly durable. With a few coats of paint, it can also offer a great look, making it an ideal option for a variety of use cases.

Other alternatives to drywall include tongue and groove boards, panelling, and beadboard, each of which offer a unique look and style.

If more insulation is desired, you can install a combination of drywall and foam insulation. This method offers more insulation while also saving you on cost. The foam insulation will still offer some degree of soundproofing, as well as protection against both cold and moisture.

Another alternative is to use a drywall alternative called oriented strand board (OSB). OSB is made of multiple layers of strands of wood that are compressed and bonded together. It is more moisture resistant than traditional drywall and more cost effective as well.

Another interesting alternative to drywall is metal panels. This is a great option for a variety of uses, from basement finish outs to detached garage walls. Metal panels are long lasting, highly durable, and offer a wide range of design options.

Ultimately, the best option for a garage wall covering will depend on your needs, budget, and desired aesthetic. Each offering its own set of benefits and drawbacks. Consider looking into all of your options before making a final decision.

How do you finish an unfinished garage?

To finish an unfinished garage, there are many steps you need to take. The first step is to ensure you have the necessary permits required for making modifications to the room. The next step is to make a plan for the space you have, taking into account the size of the room, the type of activities you plan to do there, and any special needs you may have for the space.

You will also need to decide what type of products you want to use, such as insulation, flooring, and wall coverings, as well as any other necessary materials. After deciding on the materials and plan, it is time to begin the actual work.

Begin by installing the insulation and wall coverings, if needed. Choose a type of flooring that is right for the room depending on the activities you plan to do in it and the type of material you have picked out.

It is important to make sure you prepare the flooring properly before laying it down, especially with materials like concrete or wood. Once the floor is down, it is time to begin installing the wall coverings.

This could include drywall, paneling, or other materials. It is important to make sure everything is cut properly and that each piece is fitted properly.

After the walls are in place, it is time to install the lighting and any electrical components if necessary. You can also install any overhead storage shelving or cabinetry, if desired. You will then want to apply the final finishing touches, such as painting the walls and trim, installing any door trim, and applying any decorative touches.

Once all of these steps are complete, your unfinished garage should be finished and ready to use!.

How do I build a cheap shiplap wall?

Building a cheap shiplap wall can be a relatively inexpensive and easy DIY project. Here are some tips on building such a wall:

1. Gather your tools and materials. You will need a hammer or nail gun, some shiplap boards, grout or caulk, a level, and some spackle or joint compound. You may also need a saw if you are cutting the boards to fit.

2. Measure the wall you are planning to cover with shiplap. Get the exact measurements of the space you want to cover, and then take the measurements back to the store with you to ensure you purchase the correct amount of boards.

3. Cut the boards to size, if necessary. Make sure you measure twice, cut once for accuracy.

4. Begin with the bottom row on the wall. Nail each board up securely, and use a level to ensure each board is straight.

5. Move up to the next row, but make sure there is a slight gap between each board. The gap will vary depending on what type of style you are going for, but the standard is about an eighth of an inch.

6. As you move up each row, measure the gap between each board to make sure it stays consistent.

7. When you have the boards nailed up, use the grout or caulk to seal in the gaps between each board. This will provide an air-tight seal and also prevent moisture from getting behind the boards.

8. After the grout is dry, apply joint compound or spackle to the nail holes. Once the compound dries, sand it down and give the wall a light coat of paint to provide additional protection.

By following these steps, you can easily create a cheap shiplap wall to give any room in your home a fresh look. Good luck!