Skip to Content

How much is a built in bathtub?

The cost of a built-in bathtub will depend on a number of factors, such as the size and type of material used. A basic acrylic tub can cost anywhere from $400 to $1,000, while a more sophisticated cast iron tub might cost between $1,200 and $2,000.

If you’re looking for a whirlpool tub, you can expect to pay between $2,500 and $4,500. Of course, if you’re looking for something even more luxurious, such as a combined bath and shower unit, you may be looking at an even higher cost.

In comparing with freestanding bathtubs, you’re likely to pay around 20% more for a built-in tub, as they require more material and installation work. Make sure to measure your space carefully before selecting a built-in tub, as you will need to ensure the tub fits correctly in the space.

How much does a wall in tub cost?

The cost of a wall in a tub can vary greatly depending on the type, size, materials and labor involved with the installation. For a basic, single-wall installation, the cost can range from around $200–$600 for the walls alone, not including the cost of any additional accessories.

If you are installing a multi-wall model with multiple panels, this can significantly increase the cost to around $800–$2,000 or more. Other factors that can affect the overall cost of a wall in a tub are the type of material used for the wall and the amount of labor and customization involved with the installation.

If you are having a contractor do the installation, you should also factor in additional labor costs.

How much does it cost to install a bathtub in a bathroom?

The cost to install a bathtub in a bathroom can vary significantly depending upon the type of bathtub you choose and the complexity of the installation. Generally speaking, a standard fiberglass or acrylic bathtub will cost between $300 and $1,500.

A custom-made bathtub, on the other hand, can cost between $2,000 and $4,000. The cost for installation of a bathtub could range anywhere from $1,000 to $4,000. This cost, however, would vary depending on the complexity of the installation and could include replacing existing plumbing, tiling and replacing/installing new fixtures.

Depending on the plumbing and wiring required, additional costs could incur. For instance, if you need to change the current electrical wiring to support a whirlpool, additional labor costs and permits may be necessary.

In addition to the cost of the bathtub and installation, you may need to factor in the cost of additional materials such as sealants, grout and other necessary supplies.

What is the average cost to replace a tub with a shower?

The average cost to replace a bathtub with a shower is between $1,500 and $4,000. Factors such as the quality and size of the shower, the type of fixtures, the bathroom’s configuration, the type and cost of materials, the labor involved, and whether existing plumbing needs to be replaced will all affect the overall cost.

Generally, the larger and more luxurious the shower, the higher the cost. Other features may also increase the cost, such as adding benches or seating, installing multiple shower heads and body sprays, or adding tile or other finishes.

Installing a prefabricated shower enclosure, which requires less labor, is usually much less expensive than an old-fashioned, built-in shower. Labor costs vary widely depending on the area, but in general, it’s wise to plan on spending at least a few hundred dollars for the professionals to complete the job.

What is the labor cost to install a toilet?

The labor cost to install a toilet can vary widely depending on the type of toilet being installed, the type of labor being used, and the area you live in. For example, an entry level toilet installation may cost as low as $125 for two hours of a plumber’s time, whereas a more complex, dual flush or wall-mounted option may cost around $295 for the same time.

The cost can also vary depending on additional labor being performed such as toilet flange repair, wax ring installation, mounting a new tank, etc.

Finally, the cost can also depend on the region or city you live in, as certain areas have higher costs of labor due to higher demand or cost of living. It’s best to contact a local professional and provide them with the details of the project you have in mind in order to get the most accurate cost estimate.

Can you build your own bathtub?

Yes, you can build your own bathtub, though the process can be quite overwhelming and may even require you to obtain a permit. Depending on the type of bathtub you want to build, you’ll likely need to be quite handy with woodworking and plumbing in order to do it properly.

First, you’ll need to measure the space you’ll be putting the bathtub into, and make sure the measurements are accurate. You’ll need lumber, framing materials, and any other materials depending on the style of the bathtub you would like to build.

You’ll also need to measure the area for the tub’s drain. Speak with a plumbing supply company about the best way to do this, and always make sure you are up to code. After the fittings for the plumbing have been installed, you’ll need to fill the tub with the appropriate mix of water and epoxy.

Finally, any tiles or other accents have to be laid down and you’ll need to make sure you finish with the proper sealants to ensure a waterproof and long-lasting tub. Building your own bathtub can be quite strenuous and should not be done without the proper planning and directions.

How do you build a drop in tub enclosure?

Building a drop-in tub enclosure is a project that requires careful planning and preparation in order to come out looking great. You will first need to prepare the area by making sure the walls and floor are level, inspecting the floor and wall surfaces for any leaks or damage, and making sure the walls and perimeter of the tub are lined up correctly.

Next, you will need to install the framework for the enclosure, which generally entails throwing together a few 2x4s to form the shape of the enclosure. After the frame is up, attach the panels of the enclosure to the frame and insert gaskets between the panels to provide a waterproof seal.

Many tub enclosures also require additional caulking and waterproofing before the trim and hardware can be installed. The last two steps of building a tub enclosure includes laying down tile or any other material you plan on using to finish the enclosure and installing trim to give the enclosure a neat, finished look.

How do you support a bathtub?

Supporting a bathtub is an important task, as it helps to ensure the safety of those using it. The best way to ensure adequate support for a bathtub is to use a combination of framing and decking materials.

Framing materials such as dimensional lumber or steel beams should be securely fastened to the walls to provide stability for the bathtub. Decking materials such as plywood can also be used to provide additional support.

Make sure that any materials used are adequate for the size and weight of the bathtub. If the tub is being placed on a wooden floor, additional support through joists and blocking can also be used for added stability.

For additional safety and security, a qualified professional should be consulted. Alternatively, pre-fabricated bathtub support frames are available from many home improvement stores and their installation can be completed by a professional.

Do all tubs need a mortar bed?

In most cases, it’s not clear cut whether or not a tub needs a mortar bed or not. It really depends on the type of tub and its installation. Generally, cast iron and steel tubs need a mortar bed due to their weight and size as they need a solid support to remain structurally sound.

On the other hand, acrylic and fiberglass tubs can usually be installed without a mortar bed as they are lightweight and don’t require extra support. In addition, the type of installation, the type of substrate, and the amount of weight in the tub can all have an influence on whether or not a mortar bed is necessary.

Therefore, before installation it is best to consult a professional to make sure the tub is properly supported and meets building codes.

What goes under a bath tub?

Under a bath tub, there is typically a subfloor that is in place to support the weight of the bath and anyone using it. This may include a reinforced floor or joists, or a mortared brick platform. In addition, the bathtub will typically be set on a layer of waterproof membrane, such as rubber sheet or a plastic sheet, in order to protect the underlying materials from long-term water exposure.

Underneath all of this may be a secondary layer, such as a plastic vapor barrier, a concrete slab, or a layer of insulating material, depending on the specific installation. Lastly, the pipes, drains, and other associated plumbing hardware are generally found underneath the bath tub.

Do I need to reinforce my floor for a bath?

Yes, you will need to reinforce your floor for a bath. In order for the bath to be safely and properly installed, it must be supported not only by the walls and foundation, but also with adequate support in the floor.

The exact requirements may differ depending on the size, shape and weight of the bath, and the type of floor you have. If your floor is a suspended timber platform, you may need to add additional floor joists to support it.

If it is a concrete slab, it may require larger framing members to bear the load of the bath. A professional contractor would be the best resource to determine what reinforcement, if any, is necessary in your particular situation.

Do you put cement board under bathtub?

Yes, you should put cement board under a bathtub. Cement board is a particular type of board made of Portland cement, sand, and fiberglass mesh that has excellent water-resistant properties and is ideal for use in wet areas like bathrooms and kitchens.

Installing cement board before tiling in areas like bathtubs and showers helps protect the surrounding walls and provides a solid base for the tiles and adhesive to adhere to. This prevents the tiles and grout lines from cracking or coming loose due to water saturating the underlying surfaces over time.

Installation of the cement board is straightforward and can be done by most DIY enthusiasts. It should be cut to size and installed flat against the wall surface followed by taping of the seams and corners using an alkali-resistant mesh tape.

After taping, the seams should be covered with a thin layer of thinset mortar and dried before beginning the tile installation.

Is a shower tub combo a good idea?

Whether or not a shower-tub combo is a good idea depends on a number of things. First, consider the size of your bathroom. If you have a smaller bathroom, a shower-tub combo might be a great way to maximize space.

Shower-tub combos come in all shapes and sizes so you’re sure to find one that fits your space. Second, consider how often you use the bath and shower. If you rarely take baths, an all-in-one shower-tub combo might make more sense than installing a separate bath and shower.

Additionally, if you have small children, a shower-tub combo might be a great choice so you can bathe them more easily. Finally, consider your budget. As long as you invest in a high-quality unit, a shower-tub combo can be a cost-effective way to use the space in your bathroom.

Ultimately, the decision to purchase a shower-tub combo or separate bath and shower should depend on your budget, needs, and the size of your bathroom.

When should you use a drop in tub?

Drop in tubs, also known as platform or skirted tubs, are an attractive addition to any bathroom, as they can give a room a streamlined, modern look. When deciding whether or not to use a drop in tub in a bathroom remodel, there are some factors to consider.

The primary factor to consider is the shape and size of the desired tub. Some drop in tubs are designed to fit square and rectangular opening, while others are designed for a curved opening. There are also a variety of sizes available, ranging from extra small to large, walk-in tubs.

In addition to shape and size, you will also need to consider the space available for installation. If you have limited space in your bathroom, a drop in tub may take up too much of the available floor area, making it difficult to move around.

Furthermore, you should also consider the cost of any fixtures or accessories you will need to purchase for a drop in tub. As well as steps and other items that can be added to make using the tub safer and easier.

Finally, you should consider how easy the tub will be to maintain. Drop in tubs can be cleaned easily and may often need less exacting maintenance than other tubs.

Ultimately, whether or not to use a drop in tub in a bathroom remodel will depend on the shape and size of the desired tub, the available space and the cost of any accessories, as well as how easy the tub is to maintain.

If all factors are considered and these criteria are met, a drop in tub can be an attractive addition to any bathroom.

What is the difference between an alcove tub and a drop in tub?

The main difference between an alcove tub and a drop in tub is their installation style. An alcove tub is designed to fit into a three-walled alcove, or alcove shower, with one side of the tub sitting against the wall and the other two sides of the tub surrounded by walls.

A drop in tub, on the other hand, sits on top of the floor, commonly surrounded by a decorative trim, and does not need three walls to be installed. Drop-in tubs are usually freestanding and may be installed in a variety of different settings, including niches and platforms.

In terms of size, alcove tubs tend to be shorter, while drop in tubs may be deeper or wider to fit the size of the bathroom. Another difference between the two types of tubs is their drainage and water supplying options.

Alcove tubs typically draw water from the wall, while drop in tubs may draw water from the floor. Additionally, drop in tubs may have a variety of add-on features, such as jets and lighting.

Why are drop in tubs more expensive?

Drop in tubs are more expensive because they offer a unique look and design that regular tubs do not. Unlike a regular soaker or whirlpool tub, a drop-in tub is designed to be inserted into the floor, with a surrounding deck or frame being built around it, creating a seamless look.

This requires more construction materials, and often a higher cost of installation. Additionally, certain drop in tubs may offer extra features such as built-in jets, which make them more expensive than their regular counterparts.

Can you put a freestanding tub in a shower?

Yes, you can put a freestanding tub in a shower, but it is not an easy task. Depending on the size of your bathroom and the positioning of the tub, it may require renovation work that includes things such as plumbing and electricity.

For example, you may have to move walls, fixtures, and other elements in order to make room for the freestanding tub. You may also need to reinforce the floor to ensure it can support the weight of the tub and the water you’ll be filling it with.

Additionally, you will likely need to install a new shower pan, liner, and a drain to make the tub work. Once you have the plumbing and installation taken care of, you’ll need to select appropriate tiles, grout and shower curtains, doors, and hardware to complete the look.

It is important to note that because freestanding tubs have more exposed plumbing, it is important to choose high quality materials to protect them from corrosion. Overall, it is possible to put a freestanding tub in a shower, but it requires careful planning and preparation.

What is a alcove tub?

An alcove tub is a type of bathtub that sits three of four walls and features a rear wall. It is built so that it fits snugly into a three-sided “alcove” or alcove-shaped space. Alcove tubs are commonly found in bathrooms or powder rooms because they can be placed against a wall, saving space.

The rear wall of the alcove tub is designed to hold the extra weight of the bathwater and can have a tile or ceramic finish. Additionally, alcove tubs usually include a shower curtain and a faucet at their head ends for bathing.

As alcove tubs are self-contained and shared between adjacent bathroom walls, they often make for easy installation. They provide an attractive and convenient bath/shower combination for homeowners, making them a popular choice for people seeking to conserve space within the bathroom.