Skip to Content

How much staple is in a strip?

The amount of staples that are in a strip may depend on the size and type of the staple. For example, a full strip of standard-sized staples typically contains 210 staples, while a thin strip of standard-sized staples may contain up to 105 staples.

However, there are also many types of specialty staples like longer leg staples and heavy-duty staples that have fewer staples in a strip. For instance, thin long leg staples may contain only 80 staples per strip, while a small strip of heavy-duty staples may contain just 80 staples.

How long is a standard staple?

The size of a standard staple generally ranges from 6 to 8 millimeters in length. However, this length can vary depending on the type or model of stapler being used. For example, some heavy-duty staplers may have staples that measure up to 12 millimeters in length.

In addition, the width of a standard staple is typically 1.8 millimeters, with some being slightly thinner or thicker depending on the stapler’s design.

How many staples come in a standard box?

The number of staples in a standard box varies depending on the size of staple and type of staple, but typically a standard box of staples contains between 1000-5000 staples. For example, a standard 1/4″ staple box contains 5,000 individual staples while a box of 3/8″ staples contains 1000 staples.

The number of staples in a box also depends on the manufacturer and how they package the staples. It is important to check the packaging or label to find out the exact number of staples included.

What size are Swingline standard staples?

Swingline standard staples have a staple width of 6.3 millimeters (0.24 inches). They are designed to fit Swingline, Bostitch, and other standard full-strip staplers. These standard staples work best with lighter weight paper and can bind up to 20 sheets of paper.

They feature a chisel point for improved sharpness, penetration, and clean staple lines. Swingline standard staples come in a range of colors, including silver, gold, and black, and are sold in strips of 210 staples.

What is half strip stapler?

A half strip stapler is a type of paper stapler, designed for attaching paper with a staple. This stapler is generally much smaller than a standard full-size stapler, and holds half of the amount of staples.

Half strip staplers come in different sizes, usually ranging from a mini stapler or a “toy” stapler, which holds only a few staples, to one that is large enough to hold up to 50 staples. Many half strip staplers feature adjustable throats, allowing the user to adjust the depth at which the stapler will penetrate the paper.

They are great for small amounts of paper, such as closing the end of a booklet, small envelopes, attaching photos, or labeling small packets of paperwork. Half strip staplers are a convenient and easy way to secure stacks of paper.

What staples fit in Swingline heavy duty stapler?

The Swingline Heavy Duty Stapler is an affordable and dependable stapler that is capable of stapling up to 130 sheets of 20-pound paper at once. It’s strong, durable construction and jam-free design make it the ideal choice for busy offices and classrooms.

The Swingline Heavy Duty Stapler can accommodate standard size staples in 23/6 and 23/8 sizes. It can handle an impressive 1/4 inch strip of 210 staples, perfect for every type of stapling from large stacks of paper to more delicate projects in the craft room.

Standard 23/6 staples measure 0.25 inches long and have a 1/4 inch reach. These staples work with Swingline Heavy Duty Staplers and many other models. For 23/8 staples, they measure 0.31 inches long and have a 5/16 inch reach.

23/8 staples can also be used in your Swingline Heavy Duty Stapler. In addition to standard staples, Swingline Heavy Duty Stapler is capable of using prong paper fasteners as well. These fasteners have two or three prongs made of metal and can be used to bind together up to 50 sheets of standard paper securely.

Will Arrow staples work in a Swingline 800 staple gun?

No, Arrow staples are not compatible with a Swingline 800 staple gun. The Swingline 800 is designed for use with standard, extra-strength or heavy-duty standard staples of a 23/13 (leg length) size. Therefore, any staples that are suitable for a Swingline 800 staple gun must have the same 23/13 (leg length) size.

Arrow staples are not made in such a size and therefore, they are not compatible with the Swingline 800 staple gun.

What size staples does a Swingline 101 Tacker use?

The Swingline 101 Tacker uses 1/4″ standard staples. Specifically, the model is designed for Swingline S. F. 4 Premium Staples which has a 1/4″ leg length. It has a 70 sheet capacity and a jam-clearing mechanism to quickly resolve any paper stuck in the stapler.

The Swingline 101 Tacker is a lightweight and durable stapler, making it an ideal choice for both home and office use.

How many pages can a staple hold?

The number of pages a staple can hold will depend on the type of staple used and the thickness of the paper being stapled. A standard single staple can generally hold up to 10 sheets of normal 20-pound paper, although this can vary slightly depending on the type of staple used.

Heavy-duty staples can generally hold up to 20 or 30 sheets of paper easily. However, if the paper is heavier than standard 20-pound weight paper (such as card stock), a single staple may only be able to hold 5 or 6 sheets.

It is best to experiment with both paper weights and staple sizes in order to determine the best staple for any particular job.

Why do staples have 2 settings?

Staples have two settings because they are designed to be versatile. Depending on the type of material you are trying to secure, you may need to adjust the stapler’s setting. The upper setting requires less pressure and is intended for thinner papers, whereas the lower setting requires more force and is better suited for stapling heavier objects, like stacks of paper or thicker materials.

Additionally, different sized staples have different optimal settings. When using different sizes of staples, you will need to adjust the gap at the bottom of the stapler to the appropriate setting using the provided lever.

While this means it takes some time to change the setting and optimizing the stapler for the size of the staple you need, it also ensures that you get the perfect amount of pressure for your job.

How do you calculate staples size?

Staple size is usually determined by the gauge of the wire used to make the staple, which is usually measured in either thickness or width. To calculate the size of a staple, first measure the thickness (gauge) of the staple using a ruler, as this will give you the gauge value.

Then, using the gauge value, look up the corresponding measurements for length and width on a conversion chart. Alternatively, if you know the length and width of the staple, you can figure out what gauge it is.

To do this, calculate the square root of the length and width, and then find the value in the conversion chart.

Are T50 and 140 staples the same?

No, T50 and 140 staples are not the same. T50 staples are typically used for lighter duty jobs and are smaller in size, measuring 3/8” in length. On the other hand, 140 staples are longer and thicker, measuring 1/2” in length and are generally used for heavy duty stapling jobs.

The extra length and thickness of a 140 staple makes it capable of penetrating and stapling through tougher materials.

What size staples do I need to reupholster a chair?

The size of staples you will need to reupholster a chair depends on the size of the material you are working with. Generally, small staples (1/4 to 5/16 of an inch) are used for lightweight materials such as foam and burlap, while larger staples (5/16 to 1/2 of an inch) are generally used for heavier materials such as vinyl, leather and canvas.

Additionally, you may need longer staples if you are reupholstering thicker seat cushions. It may also be useful to invest in an adjustable staple size remover which will allow you to quickly and easily remove and replace staples from the chair material.

What is the difference between half strip and full strip staplers?

Half strip and full strip staplers are both desktop staplers that can be used for mundane office tasks like stapling papers together for reports and presentations. The main difference between the two is the size of the staple they are able to accommodate.

Half strip staplers are equipped to accept staples that are 1/2 inch in length while full strip staplers can accept staples that are up to 1 inch in length. Half strip staplers typically have a lower stapling capacity and they require the staples to be reloaded more often than the full strip staplers.

The half strip staplers are more commonly used for smaller office tasks such as stapling single sheets of paper together while the full strip staplers are great for larger jobs, like binding booklets.

Additionally, full strip staplers can usually staple more pages together at once than the half strip staplers.

What are the different types of staples?

The different types of staples can vary greatly depending on the type of project for which they are being used. The most common types of staples used in everyday life are those found in office staplers, such as standard flat clinch staples, heavy-duty staples (both flat clinch and saddle), and linear staples (used for binding documents).

Popular industrial-grade staples include upholstery, carpet, and drywall staples, all of which are designed specifically with certain materials in mind. There are also specialized types of staples available for specific tasks, such as specialty flat clinch staples, barbed staples, shingle staples, and flooring staples.

Finally, staples for use in carpentry and construction come in a wide variety of shapes and sizes, from small crown staples to clamshell staples to roofing staples. In fact, there are even particular staples designed for use in wallpaper, insulation, and masonry.

How do I choose a stapler?

When choosing a stapler, you should consider what you are using it for and how often you plan to use it. For example, if you are using it in a home office occasionally and only for a small amount of pages, a regular single stapler should do the trick.

However, if you are using it for a large scale project in a high-volume office environment, then you would want to look for a heavy duty model.

In addition to the type of stapler, you should also consider how easy it is to use. If you are new to staplers, look for one that has an adjustable throat depth so you can customize the size of the staples for the job you are working on.

You should also look for a stapler with a handle that is comfortable to hold and can maintain a steady pressure as you work in order to make sure each staple is properly compressed.

It is also important to make sure that you have the right staples to use with your stapler. The gauge of the staples should be compatible with the size of the stapler and the job you are tackling. Offices typically use standard staples, but if you have heavier paper or thicker material you will need longer staples.

It is best to buy the staples that are specifically designed to work with your model of stapler in order to prevent jamming and other issues.

Overall, when choosing a stapler you should make sure it is compatible with the type of job you are doing, that it is comfortable and easy to use, and that it comes with the right staples to get the job done.

With these factors in mind, you should be able to find a stapler that fits your needs.