Blinds need to be cleaned regularly, depending on the type of blinds and their location. The general rule of thumb is to clean them at least once every two to three months. It is especially important to clean blinds in locations that are exposed to direct sunlight, dust and humidity, such as windows that face the street.
For these blinds, it is recommended that you clean them at least once a month. If you live in a coastal area, you may require more frequent cleaning.
To clean blinds, dust the slats using either a feather duster or a microfiber cleaning cloth. Then use a damp cloth to wipe down each slat. After cleaning, use a dry cloth to wipe the slats again to avoid any moisture build-up.
If you have wooden or faux wood blinds, you can use a cleaning solution specifically made for blinds or use a mild soap and water mixture. Cleaning plastic or metal blinds is often easier and requires only a damp cloth and mild detergent.
Oil-based cleaners should never be used on wooden or faux wood blinds.
How do you clean blinds like a professional?
Cleaning blinds like a professional requires a few steps. Start by wiping down the slats with a damp cloth to remove any surface dirt or dust. Take a soft brush and vacuum each individual slat, using the brush attachment of the vacuum or a handheld vacuum if available.
This will remove any finer particles of dust. If the blinds are very dirty, mix a solution of warm water and dish soap and use a sponge to wipe down the slats. Be sure to rinse the blinds thoroughly with warm water to remove any excess soap.
After cleaning, dry the blinds with a clean, dry cloth. Finally, consider a blind lubricant spray to help keep them dust free, and this will also help with their operation.
What is the fastest way to clean window blinds?
The fastest way to clean window blinds is to remove them from the window and soak them in warm, soapy water for 15 minutes. After soaking, rinse them off with plain water and use an old toothbrush or soft sponge to scrub away any dirt or dust stuck in the slats.
Rinse again with plain water and then let them air-dry. To speed up the process, use a squeegee to remove excess water quickly. Next, use a vacuum cleaner with a brush attachment to loosen any dirt, dust, and cobwebs.
Lastly, use a dry cloth to wipe down each slat to restore their shine.
How do I clean my blinds without taking them down?
Cleaning your blinds without taking them down is a relatively easy and low-maintenance task which, if done frequently, will greatly reduce dirt build-up and keep your blinds looking their best. Here are some tips on how to clean your blinds without taking them down:
1. Use a vacuum cleaner with its brush attachment to lightly brush over dirt and dust on the blinds. Be sure to brush both the slats and the cords if they are present.
2. Use soapy water to wipe down the blinds. You can use a damp cloth with mild dish soap, or try a microfiber cloth dipped in a solution of warm water and white vinegar.
3. Rinse off the soapy water using warm water and a clean cloth.
4. Dry off the blinds using a towel.
5. Polish the slats of the blinds using a small amount of oil-free furniture polish.
6. To keep the cords of your blinds looking and working their best, you can use light lubricant oil such as WD-40.
7. Finally, use a damp cloth to clean the edges of your blinds, as well as the window frame they are mounted to.
If you perform these steps regularly, your blinds will remain clean, free of dust, and looking like new.
Can you wash blinds in the bathtub?
Yes, you can wash blinds in the bathtub. The best way to do this is to fill the tub with warm water and a mild detergent. Place the blinds in the tub and use a soft brush to lightly scrub each slat. Rinse the blinds with a soft cloth or handheld shower head and hang them up to dry.
If the blinds are too large to fit in the bathtub, you can also fill a large basin or bucket with soapy water and use the same method to clean one side of the blinds at a time. Make sure to lay something down on the ground or cover the surface before you start to protect your floor from water damage.
What is the way to dust a blind?
The best way to dust a blind is to use a soft lint-free cloth and a mild cleaner. Start at the top of the blind and move the cloth in an up and down motion, using a gentle pressure. Make sure you are careful not to pull the strands of the blind too hard.
To ensure the cloth picks up as much dust as possible, you may need to use a static duster. After using the cloth, go over the blind again with a static duster as this will help remove any dust that has been left behind.
Finally, check to make sure you have cleaned all of the dirt and dust from the blinds, and use a vacuum with a soft brush attachment to remove any remaining dust particles.
How do you clean slatted blinds?
Cleaning slatted blinds can be tricky, but the job can be made much easier with a few simple tips. The easiest way to clean slatted blinds is to first use a duster or microfiber cloth to remove dust and dirt from the top surface and in between the blinds.
This should be done at least once every two weeks. Secondly, for a deeper clean, you can use a vacuum cleaner with its short bristle brush attachment to help dislodge any stubborn dirt. To clean the build up of dirt and oils from the blinds, you can use a mild detergent or all-purpose cleaner in lukewarm water.
Soak a soft cloth in the solution and gently rub both sides of each slatted blind. Make sure to do the same for the strings and dowels running across the slats. After wiping, immediately rinse the dirty cloth with clean water and wipe off the detergent, taking care to not leave any soap residue that could damage the finish.
Finally, you can use a dry cloth or duster to ensure the blinds are completely dried. If you have wooden slats, be sure to condition them regularly with a soft cloth or brush.
Can I use a steamer to clean my blinds?
Yes, you can use a steamer to clean your blinds. For best results, you should make sure that the steamer is set to the appropriate temperature and is compatible with the material your blinds are made of.
You should then go over each blind thoroughly with the steamer. This will remove dust, dirt, and other particles from the blinds. You may additionally want to wipe them down with a damp cloth after steaming for a more comprehensive cleaning.
Additionally, keep in mind that some blinds are delicate and require special care and attention. In such cases, it is best to seek professional cleaning services.
How do I get my blinds white again?
To get your blinds white again, you will need to deep clean them. First, use a soft brush or vacuum cleaner to remove any dust and debris. Next, mix a solution of warm water and a mild detergent, such as liquid dish soap or dishwasher detergent.
Using a soft cloth, dip it in the solution and gently scrub to clean each slat. Allow the blinds to air dry before hanging them back up. If the solution doesn’t get your blinds completely white, mix one part hydrogen peroxide and four parts water.
Dip the cloth in the mix and gently scrub each slat again. Once all of your blinds are clean and dry, you should have them looking nice, bright, and white again.
