Skip to Content

How should roman shades be hung?

Roman shades should be hung according to the manufacturer’s instructions. This is to ensure that the shades are installed correctly and safely. The first step is to measure the width of the window and subtract 1/2 inch (1.25 cm).

This will give you the exact width of the roman shades fabric. Next, location the area of wall where the mounting brackets will be placed. Use a level to make sure the brackets are perfectly aligned and use appropriate screws to mount each bracket.

Lastly, check the mounting headrail for fit into the brackets. Secure the headrail and check that it is level. Then, insert the fabric into the headrail, making sure to evenly distribute the fabric along the top of the headrail.

Finally, attach the cords to their respective chain. To prevent possible choking hazards due to the length of the cord, cord cleats should be used to tie up the excess cord and secure with screws.

Where should Roman blinds be placed?

Roman blinds should be placed in the window recess for a neat, tidy, and symmetrical look. Additionally, Roman blinds are a great way to save space from covering the entire window with drapes, and make the room appear bigger.

When Roman blinds are installed correctly, they offer insulation, light control, and privacy. Installation of Roman blinds typically require mounts, brackets, and screws that are secured into the wall beside the window, as well as a curtain rod inside the window recess.

To allow the Roman blinds to hang properly, the screws should be placed a few inches above the window, and the curtain rod should be a few inches below the window. In terms of deciding the height, the blinds should be placed no lower than 40 cm down from the top of the window to avoid obstructing the view and prevent awkward sagging.

If the Roman blinds are placed too low, they will just get in the way. When measuring for the width of the Roman blinds, be sure to measure top to bottom, inside of the window recess to ensure a good fit.

How far above a window should a Roman blind be hung?

When installing a Roman blind, the general rule of thumb is to hang it approximately 4 inches above the window for a traditional two-story home, and 6 inches for a single-story home. This provides the necessary space for the fabric to fold up into itself and creates a neat, symmetrical appearance.

It is also important to consider the existing decor in the room. If there is existing trim or cornice above the window, the Roman blind should be hung a few inches below the trim or cornice. Another factor to consider when hanging a Roman blind is the amount of light the window will receive once the Roman blind is installed.

When measuring to hang the Roman blind, make sure to make it wide enough to cover the entire window and its trim. This will ensure that the window receives the proper amount of shade and light control.

Which way do roman shades face?

Roman shades typically face the interior of the home, making them more effective at blocking out light and achieving privacy. When installed correctly, the window shade will block out light on the outside of the room and prevent it from entering the home.

For optimal energy efficiency, the warmer side of the shade should face the interior, since this side blocks out more heat during the summer and the cold side will insulate the window in the winter. Although Roman shades can be installed to face either direction, they typically look their best when they face the interior, as this allows them to be folded up and tucked away when not in use.

Should roman shades be inside or outside mount?

In the most basic sense, a roman shade can be either an inside mount or an outside mount.

An inside mount roman shade sits inside the window frame and is mounted to the trim on the interior side of the window. Inside mount blinds give a more streamlined and finished look as they are not visible from the exterior side of the window.

However, there are certain window frames in which inside mounts cannot be used as the opening needs to be at least 3/4 inch larger than the top and bottom edge of the shade fabric.

An outside mount roman shade is mounted to the surface above the window frame. Outside mounts are often used if there is not enough window depth or head clearance- or when the window frame is particularly wide or oddly shaped and makes it difficult to install an inside mount roman shade.

Outside mount roman shades are highly versatile and create visual impact with or without the addition of drapery panels, while also providing greater light control.

The decision between inside or outside mount comes down to personal preference and taking into consideration any impediments that may conflict with either option. Ultimately, the best way to determine which mount will work best for a particular window is to consult with a window treatment expert.

What is a reverse Roman shade?

A reverse Roman shade is a type of window covering that has a flat, smooth appearance when open, and a textured, pleated look when closed. This type of shade has a rod at the top, which passes through multiple loops of the fabric to create the pleats.

When closed, these loops are visible, and when opened, they are flattened out. This design allows for the shade to block light when closed, while providing an open and airy feel when open. Additionally, the folds of the shade can be adjusted to control the amount of light that is blocked.

Reverse Roman shades also have the benefit of being easily customizable, as they come in an array of colors, patterns, and textures.

How do Roman shades go up and down?

Roman shades go up and down by being operated by a cord or a handle pull. The cord is usually connected to the bottom rail of the shade, and when pulled it causes the shade to fold in symmetrical pleats as it is raised up.

In order to lower the shades, you simply pull down on the cord or handle. As you pull down on the cord, the pleats will unfold and the shade will lower until it reaches the bottom of the window. This type of shade is a perfect choice if you are looking for a classic look in your home, as they have a timeless style that is suitable for any interior style.

How does a Roman blind work?

A Roman blind is a type of window blind that folds up into neat horizontal pleats when raised. It is operated with a cord and pulley system that allows you to raise and lower the blind. When the cord is pulled, the blind will fold up evenly into neat horizontal pleats.

The pleats form when the blind is pulled up and held in place by special fabric fasteners. When the blind is lowered, it falls into graceful and stylish folds which create a different effect compared to other types of blinds.

Additionally, buying a Roman blind gives you the option of having a blackout blind, preventing unwanted light coming into the room. Roman blinds are a great addition to any home and add sophistication and style to any room.

What is the difference between flat fold and soft fold Roman shades?

Flat fold and soft fold Roman shades are two types of window treatments that both often feature fabric in horizontal pleats that are designed to offer privacy and insulation. The main difference between the two is how the fabric is folded when it’s not in use.

Flat fold Roman shades are designed with a continuous piece of fabric that permanently remains in straight horizontal pleats, while soft fold Roman shades feature overlapping vertical pleats that can be compressed into a softer, less structured look when lowered.

Generally speaking, flat fold Roman shades are a good choice for modern, contemporary, or formal decorating styles as they offer a more crisp and structured look, while soft fold Roman shades generally provide a more relaxed, casual aesthetic that is often better suited for traditional or rustic decor.

How far should blinds be from the window?

The ideal distance for your blinds from the window depends on the size and shape of the window. For standard-sized rectangular windows, the blinds should be installed approximately 2-3 inches from the window frame, or the recess where the window meets the wall.

For larger or odd-shaped windows, you may need to move the blinds up or down accordingly. It’s generally best to avoid mounting the blinds directly on the window itself, since they could interfere with the opening and closing of the window, as well as scratch or damage the glass over time.

Additionally, mounting the blinds further away from the window allows for better light control and prevents the dreaded “plaque” look.

How much space do you need on each side of blinds?

When hanging blinds, typically it is recommended to leave at least 3 to 4 inches of space on each side to allow for the hardware and cord clearance. This can vary depending on the window and the size of the blinds you are using.

If your window frame is wider than your blinds, you may need more space to ensure proper installation. Additionally, if you wish to fully close the blinds, they must be hung wider than the window frame to prevent any gaps in coverage.

It is important to adhere to the specified space recommendations provided by the manufacturer when installing blinds to ensure your window covering works correctly and will last for years to come.

Are blinds supposed to touch the window sill?

No, blinds should not touch the window sill. Depending on the size and shape of your windows, the blinds should be slightly above the window sill with a bit of space in between. This will allow the blinds to operate more smoothly and provide more flexibility for tilt and light filtering.

It also helps to prevent dust collecting along the bottom of the window treatments. If your blinds are too low and touching the window sill, you risk them scratching or damaging the window frames, as well as interfering with how the blinds work.

To prevent this issue, use spacers at the bottom of the blinds and make sure the window treatments are installed properly. This will help keep your blinds looking nice and functioning properly.

Do outside mount blinds look good?

Yes, outside mount blinds can look great in any room if done correctly. When done properly, these types of shades can add extra depth to your space and bring light in, which can help make a room look and feel larger and more inviting.

They are also a great way to add visual appeal and can be found in a wide range of colors, styles, designs, and materials so you can create the perfect look for your home. Plus, they can be operated easily, offering great light and privacy control with safety features to keep curious little fingers out while still looking great.

How do you hang blinds on the outside of a window?

To hang blinds on the outside of a window, start by measuring the window and purchasing blinds that are the exact width and height of the window. Then, locate the window casing and locate the window header on the top where the metal brackets will be mounted.

Mount the brackets to the casing, using screws or masonry anchors depending on the make up of your exterior. Slide the blinds into the brackets to secure them. Next, add any decorative valances, clips, or cords according to your desired look.

Finally, lower and raise the blinds to check they are working correctly.

Can you shorten roman shades length?

Yes, it is possible to shorten the length of roman shades. Typically this involves a few different steps, including removing the dowel rods and lifting the material that covers the rod. Next, the top rod should be cut to the desired length and the hem should be folded and secured with fabric tape.

The lining should also be cut to the same desired length. After cutting the rod and lining, re-assemble the shade by pushing the top rod into the lower bracket and re-attach the dowel rods. Finally, the excess material should be secured by stitching around the sides or bottom of the shade.

Following these steps makes it easy to shorten the length of roman shades.

Should Roman blinds touch the window sill?

The answer to this question depends on the style of your home and personal preference. Generally, the bottom of your Roman blinds should not hang lower than the window sill, but it can depend on what type of blind you have.

If you have a standard Roman blind with a fabric that is slightly heavier then it may rest lightly on the window sill without completely touching, giving a neat and clean look. However, if you have a soft fabric or light-weight blind then it will most likely hang slightly lower.

This can be a great way to soften the look of the window, adding a sense of warmth to the room. Ultimately, it’s up to each individual to choose what works best for them aesthetically and with their chosen decor style.

What is minimum drop for roman blind?

A minimum drop for a roman blind refers to the shortest possible length it can be extended to when closed. The exact length of a roman blind’s drop varies depending on the design and manufacture of the blind.

Generally, most roman blinds have a minimum drop of 18 to 24 inches from the top of the headrail to the bottom of the fabric. However, there can be some variation. Some brands offer roman blinds with a minimum drop of 15 inches, while others may offer a minimum drop of up to 30 inches.

When purchasing a new roman blind, be sure to measure the length of your window opening to select an appropriately sized blind with the desired minimum drop.

Where do you place Roman blinds?

Roman blinds can be placed in several areas in your home depending on the look you wish to create. They can be used to adorn windows, patio doors and larger sliding glass doors. Roman blinds are often hung from the inside of a window frame or from the ceiling.

Roman blinds add a more decorative and ornamental touch, much more so than a standard roller blind, and can even be installed in bay windows for a luxurious look. They are also an ideal choice for kitchen, bathrooms and wet areas as they are easy to clean and don’t impede ventilation.

Roman blinds work with any type of décor, be it traditional or contemporary, with many fabric designs, patterns and colours to choose from.

How deep do windows need to be for roman shades?

Windows need to be at least 4 1/2 inches deep in order to install Roman shades. To understand the depth of a window, measure the space between the glass/window frames where the shade will hang. If the depth is less than 4 1/2 inches, a custom shade may need to be made to fit the window.

Most Roman shades come in standard widths, but the depth is customizable. It’s important to note that if the shade is made to be shallower than 4 1/2 inches, it may not fold neatly when open. Additionally, if the window is too deep the shade will have excess fabric when closed, creating a bulky look.

Leave a comment

Your email address will not be published. Required fields are marked *