Shiplap on a ceiling is not necessarily a fad. It has been a popular design feature in different types of homes for many years, and continues to be a popular choice among homeowners. Shiplap typically consists of lengthy horizontal boards that fit snugly together to create a unique, finished look on a ceiling or wall.
It adds texture and depth to the space, and can easily be painted to fit whatever the homeowner has in mind. It also adds a rustic or coastal flair to a room, which complements a wide variety of design styles.
Due to its versatility, shiplap can be used in many different areas throughout a home, and its affordability makes it an accessible option for homeowners. Whether shiplap on a ceiling is a fad or not is up to the homeowner, as long as it meets their design needs.
How do I make my ceiling look like shiplap?
Shiplap is a popular interior design trend that adds both visual appeal and texture to walls and ceilings. To give your ceiling the shiplap look, you will need to purchase some pre-cut pine boards from a local home improvement store, and depending on the size of your room, determine the number and size of boards needed.
Once you have all of your boards, you will want to start from one wall and work your way around the room. Line your boards up side by side and use finishing nails to secure them to the ceiling, being careful to make sure there is a small gap between each board (commonly referred to as a “reveal”).
Once each board is in place, use a finishing tool, such as a palm sander, to smooth out any rough edges and make the shiplap look slightly more polished. From there, you should add any caulk or wood filler needed where the nails were placed, followed by a coat of primer and then an optional paint color of your choice.
Finally, step back and enjoy your new shiplap ceiling!.
Which way should shiplap run on a ceiling?
When it comes to the orientation of shiplap boards on a ceiling, the general consensus is that the boards should run horizontally. This serves a very practical purpose from an installation standpoint since the boards must attached flat to the ceiling joists and there must be a gap between them for caulking.
Additionally, when the boards are running horizontally this helps to visually connect the boards and make them look like one cohesive surface.
It is important to note that horizontal shiplap installation is only appropriate for ceiling heights of 8 feet or more. If the ceiling is not tall enough, installing the boards vertically can help make the ceiling feel taller and can draw the eye upwards.
It is also possible to install shiplap on an angled or vaulted ceiling by cutting each board to the angle of the ceiling.
Either way, installing shiplap on the ceiling can be a great way to add a unique touch to the space while still adding a sense of cohesion and continuity.
Is it expensive to shiplap a ceiling?
Yes, it can be expensive to shiplap a ceiling. The cost of the materials needed for shiplapping a ceiling can range from $1 to $10 per foot, depending on the type of material chosen. In addition, you also need to factor in labor costs as well – hiring a professional to install the shiplapping can add to the cost, as labor can run between $50 and $100 per hour, in addition to the materials.
Finishing touches such as adding trim, staining the wood, or painting the wood will also come with labor costs. There may be additional costs depending on the complexity of the project. Overall, it is important to carefully budget all of the necessary materials and labor costs, as the actual cost of shiplapping a ceiling can quickly add up.
Can you put shiplap over drywall ceiling?
Yes, you can put shiplap over drywall ceiling. The process is fairly straightforward, as long as you take the time to prep the space correctly. First, make sure your drywall ceiling is in good condition and use a level to fully prep the space.
Next, use construction adhesive to affix the shiplap boards to the ceiling. Make sure to nail the boards into joists and studs for extra stability. Additionally, be sure to fill any seams with caulk to keep any drafts from entering the room.
Once the shiplap is installed, you can finish the look with a coat of paint. Following all these steps will ensure a secure and beautiful shiplap installation over a drywall ceiling.
Is it cheaper to drywall or shiplap?
Whether drywalling or shiplapping is cheaper depends on your desired aesthetic and the cost of materials in your particular area. Drywalling is typically cheaper, as it requires minimal materials, is fairly easy to install, and is readily available.
If you plan to paint it, drywalling can be a cost-effective means of achieving a smooth and painted wall. Shiplapping requires additional materials such as lumber, nails, glue, and caulk, as well as additional labor to construct and install.
However, shiplapping can create a beautiful rustic wall look and can potentially be less costly in the long-term than drywalling, as it is sturdier and may require less maintenance. Additionally, the labor costs can vary depending on who you hire to do the work.
Ultimately, the cheapest option for you will depend on your desired aesthetic and cost of materials, so it’s important to do your research before making any decisions.
How much does it cost to plank a ceiling?
The cost of planking a ceiling will depend on the size of the ceiling, materials and labor costs in your area. Generally, labor costs range from $2-$4 per square foot for installation, and the materials can add up quickly, depending on type and quantity required.
Typical plank materials include MDF, genuine wood planking, or tongue and groove boards, which all range in cost from $3-$10 per square foot. If additional supplies such as adhesive, trim or caulking, or a thorough cleanup are needed, the costs can increase.
Therefore, it’s difficult to give an exact cost without a full assessment of the job. Most homeowners, however, spend an average of about $2.70-$4.60 per square foot for both materials and labor when planking a ceiling.
What can I use for fake shiplap?
If you’re looking for a less expensive alternative to traditional shiplap, there are plenty of DIY-friendly options you can use. One great option is to use plywood in various widths and paint it in any desired color.
Plywood is relatively inexpensive and easy to cut, so it’s a great material for creating a shiplap look. Another option is to use MDF boards that come in 4×8 sheets – you can simply cut them down to the desired size and install them onto the wall.
Additionally, you could use tongue and groove boards, which are also easy to install and come in a variety of widths. Lastly, if you’d like a faster and easier way to achieve the shiplap look, you can also find pre-primed faux shiplap panels that are ready to be installed.
What material is used for shiplap ceiling?
Shiplap ceiling is usually made of wood or metal. Wooden shiplap is typically used in rustic or farmhouse-style homes and is usually made of spruce, pine, cedar, or cypress wood. Metal shiplap is more common in contemporary homes and is usually made from galvanized steel, aluminum, stainless steel, or even corrugated metal.
Wooden shiplap is commonly used for interior ceilings and walls but can sometimes be used for exterior applications such as awnings or decks. Metal shiplap is most often used for exterior cladding, siding, and roofs.
When used for a ceiling, metal shiplap is often used as an accent in combination with wood or drywall.
What is the cheapest way to get the shiplap look?
The cheapest way to get the shiplap look is to use inexpensive materials like tongue and groove or plywood planks. Plywood planks can be purchased for a few cents per square foot and come in a variety of sizes, thicknesses, and woodgrains.
They can also be painted or stained to fit any desired style. Tongue and groove planks may also be used, and are typically sold in packs of around five to ten pieces. The pieces more easily interlock, creating a seamless look and hiding any gaps.
They generally cost slightly more than plywood planks, but are still a cost-effective option for creating the shiplap look. Additionally, if you’re looking for a more rustic, natural look, true shiplap boards can typically be found at most lumber yards and home improvement stores.
They have a more traditional look, but may cost more.
How do you make fake shiplap?
Creating faux shiplap is a great way to add a rustic look to your décor without having to go through the hassle of installing real shiplap planks. The first step is to determine what size and shape of planks you want to use.
To create a traditional look, use planks that are 8-10 inches wide and 2-3 feet long. You can, however, also customize the size depending on the size of the wall and the look you are going for.
Once you have determined the size of the planks, you will need some 1/4” plywood, a drill bit and clamps. Start by cutting the 1/4” plywood into the shapes you have chosen. Use the drill bit to create holes at one edge of the plywood.
Make sure to use clamps when creating the holes to ensure accuracy.
Once the holes are in place, you can begin attaching the plywood planks to the wall. Make sure that the holes are lined up correctly and use nails or wood glue to secure them. Remember to fill any gaps with caulk or wood putty to give the look a finished look.
Once all the planks are in place, you can begin to paint them in your desired color. If you are going for a rustic look, give the walls a stain. For an ultra smooth finish, sand down the edges of the panels to give them a more professional look.
By going through these simple steps, you can create a beautiful look with faux shiplap without having to install real shiplap. Just remember to use caution when cutting the plywood and to use appropriate glue and nails to secure the planks to the wall.
Can you paint to make it look like shiplap?
Yes, you can paint to make it look like shiplap. You’ll want to start by preparing the wall by cleaning it, sanding down any bumps, and filling any nail or screw holes. Then, use a high quality primer to prepare the surface for paint.
Next, use a semi-gloss paint, as this will give you the best finish that looks like real shiplap. You may want to also use a low-tack painter’s tape to achieve a straight line look as it makes it easier to paint a single solid line.
To achieve the perfect shiplap look, use a brush to lightly wipe or drag the paintbrush in short, horizontal strokes along the wall. Allow each coat to dry thoroughly before adding a second or third.
Once you’re finished, you should enjoy a beautiful, rustic-looking wall.
What type of wood is used for faux shiplap?
Faux shiplap can be produced using many different types of wood such as pine, Douglas fir, spruce, cedar, and hemlock. The best type of wood to use for faux shiplap depends on the desired look and the budget.
Pine is one of the most popular choices because it is the most affordable, light in weight, and works well with paint or stain. On the other hand, Douglas fir, spruce, and hemlock are all durable and offer a wide range of colors and finishes for a custom look.
Cedar is another popular choice for faux shiplap because it is a rich colored wood with a lot of character, though it can be more expensive. Ultimately, the best type of wood to use for faux shiplap is up to the individual and their budget as some woods may have a much higher cost but last longer.
Can you make your own shiplap?
Yes, you can make your own shiplap. Making your own shiplap requires planning and patience, but can be a satisfying project. The process requires you to measure and cut the boards to size, then attach them.
Most often, shiplap boards are cut to 6-8 inches wide and attached directly onto the wall’s existing studs. To attach them, you will need a saw, a hammer or drill, a level and wood screws. You may also need a nail gun or finishing nails to minimize any gaps between the boards.
Additionally, you can further spruce up shiplap boards using paint, stains and sealers. If you do choose to paint or stain the boards, you’ll also need paintbrushes, rollers, sandpaper, and/or gloves.
Once you have all these materials, it’s time to begin. Before attaching your shiplap boards, you’ll need to apply a vapor barrier. Vapors traveling through the walls are the leading cause of wallpaper failures, so this is an important step! For best results, start at the bottom of the wall and work up.
Also, be sure to start and end each row with a stud. If you don’t, you may need to use a stud finder to locate where to add a shiplap board. Lastly, you may want to add trim around the edges for a finished look.
Keeping the prior steps in mind, you’ll be on your way to having a stylish, custom shiplap wall.
Is shiplap cheaper than drywall?
The cost of shiplap versus drywall depends on a variety of factors, such as the quality of the materials, the complexity of the project, the labor required, and the size of the area being covered. In general, shiplap is usually more expensive than drywall.
Shiplap is a traditional wall covering that is made with interlocking wooden planks, usually pine, and is commonly used in rustic cabin décor. It typically comes in shorter, thicker planks compared to typical drywall, which can make it more difficult to install.
It can also require a few additional steps during installation to ensure a solid fit.
Drywall is far more common and typically more affordable than shiplap. Drywall is usually sold in 4’x8′ sheets and is easy to hang by a single person. Drywall can be finished in a variety of ways with different textures, however, if you are looking for a more rustic look, shiplap might be the better option.
Overall, drywall is generally the cheaper option when it comes to wall covering. However, if you are looking for a more distinctive look, shiplap may be the way to go.
Is shiplap easy to install on a ceiling?
Shiplap installation on a ceiling is relatively easy with the proper installation techniques and tools. Before installing, make sure to measure, mark, and level out the wall. When you’re ready to begin, use a hammer, nails, a level, and a reciprocating saw to cut the shiplap planks and then the holes for the nails.
Once the pieces are cut, nail the planks to the wall about 6 inches apart, making sure to remain level as you go. Make sure to measure out each plank individually, so that you don’t have any uneven or misaligned pieces on the ceiling.
After installing, sand down any rough edges or spots. Finally, finish and seal the surface to protect it against any damage. If you take your time and are attentive to detail, you can easily and successfully install shiplap on your ceiling.
Does shiplap look good on ceiling?
Whether or not shiplap looks good on a ceiling depends largely on your own personal taste and the style of the room you are trying to create. This type of design feature is often seen in traditional farmhouse-style interiors, characterized by the intimate and cozy atmosphere they inspire.
Shiplap can provide an extra level of texture to the ceiling, making it stand out more and creating an interesting focal point in the room. When used on the ceiling, it can easily help to draw the eye upwards and fill a space with a rustic charm.
On the other hand, if your decor is more contemporary, this design feature might be too busy and may not quite match the look of the interior. Ultimately, it’s up to you to decide whether or not shiplap looks good on your ceiling.
Is shiplap expensive to install?
The cost of installing shiplap will depend on a few factors such as the size of the space, the type of shiplap material chosen, the complexity of the installation, and the cost of labor. Generally speaking, shiplap is not considered to be an expensive material to purchase, however labor costs can be more expensive, depending on the complexity of the installation.
For a basic installation, basic pine shiplap can range anywhere from $5 to $14 per square foot, not including labor and other materials. For more complex installations, premium materials such as hardwright or cedar shiplaps can increase the price to around $25 – $30 per square foot.
Labor costs can increase the final cost significantly.
Overall, shiplap can be a cost-effective material for DIY projects and home renovations, as long as the installation cost is taken into consideration.
What size shiplap should I use for ceiling?
The size of shiplap used for a ceiling will largely depend on the size of the room and the look you’re going for. Generally, tongue and groove shiplap is available in 8-inch, 10-inch, and 12-inch widths, so you have some flexibility when it comes to size.
If you’re trying to make a room look bigger, then 8-inch boards are often preferred. This will create a narrower visual line, making the room appear wider, which is great for small spaces. Alternatively, if you have higher ceilings, then 10-inch or 12-inch boards can be used to create an eye-catching visual effect without overwhelming the room.
Another important factor to consider is the final look you’re trying to achieve. For a traditional look, opt for the wider boards, while for a more modern look, choose the narrower boards.
Ultimately, the best size shiplap for your ceiling will depend on the room size and aesthetic you’re going for. Experiment with the different sizes and get creative with how you apply the shiplap to find the perfect look for your space.
Is shiplap a trend or timeless?
Shiplap is both a trend and a timeless design element. While it has experienced a surge in popularity in recent years, shiplap has been used in interior design since the 19th century. It is most commonly used on walls and ceilings, adding a rustic, farmhouse-style charm to a space, but can also be used as a visually interesting accent on furniture and other structural elements.
Shiplap’s popularity seems to come and go in cycles, with recent spikes occurring in the last few years. While it can feel like a very trendy element, when done right, it can add a sense of classic, timeless style to a room.
It can be easily painted or stained to blend in with a variety of design styles, making it a highly versatile design choice.
Shiplap has experienced a resurgence in popularity in recent years, but it has been used in home design for centuries. When used wisely and tastefully, it can add a classic, timeless charm to a space.
