Skip to Content

Is Simple Green safe on epoxy floors?

Yes, Simple Green is safe to use on epoxy floors. Simple Green is a non-toxic, biodegradable, multi-purpose cleaner that is certified by the EPA as a Safer Choice Product. It is also non-corrosive, non-flammable and non-abrasive, so it is safe to use on all types of flooring, including epoxy.

Simple Green is also safe for human, animal and aquatic use. When used properly and as directed, Simple Green can be used to clean and polish epoxy floors without causing any damage or harm. Before using any cleaning product, it is always best to read the product label and consult with the manufacturer’s instructions to ensure proper and safe use.

What do you clean epoxy floors with?

Epoxy floors should be cleaned regularly to maintain their attractive appearance and prevent wear and tear. The most effective way of cleaning epoxy floors is a two-step process. First, use a neutral-pH cleaner (specially formulated for epoxy floors) to remove dirt, residue and other stains.

Spray or mop the cleaner on the surface and allow it to sit for a few minutes before scrubbing it with a stiff-bristled brush as necessary. Once all contaminants have been removed, use a buffer machine with a soft brush attachment to thoroughly scrub and polish the floor.

This will bring out its shine and help protect it from further wear and tear. Finally, use a wet-dry vacuum cleaner to remove any remaining debris. Make sure to not use harsh chemicals or acid-based cleaners, as these can damage the epoxy floor.

Can you use Simple Green on floors?

Yes, you can use Simple Green on floors, but it is important to use it according to the instructions and to check the label carefully, as different types of floors may require different cleaning solutions.

Simple Green All-Purpose Cleaner, when used correctly, can be used to clean sealed tile, vinyl, linoleum and sealed cement floors. It is a general cleaner that effectively cuts through grease, grime and dirt and is also safe for pets and people.

When using Simple Green on floors, it is best to adhere to the directions on the bottle and to test it in a hidden area of the floor to ensure that it does not cause discoloration. If using it to mop, it’s important to use lukewarm water and to not let the solution sit in one spot for too long.

When finished, be sure to completely rinse the floor with a clean mop and plain water.

How can I make my epoxy floor shine again?

Making your epoxy floor shine again can be accomplished in several ways, depending on the condition of the floor and the tools/products available. Here are some steps to help:

1. Vacuum and/or sweep the floor if needed. This will help to remove loose dirt and dust that could interfere with the polishing process.

2. Polish the floor, either by hand or by machine. If you use a machine, start with a relatively coarse grit to help remove any scratches or other imperfections in the epoxy surface, then increase the grit as needed to achieve a smooth and shiny surface.

3. If the floor is still not as shiny as desired, you can use a dedicated epoxy floor polish. This can be applied either with a machine or by hand using a cleaning cloth to apply it evenly.

4. To keep the shine from fading, it is important to use a good quality sealant on the epoxy floor. This will help to protect the finish and keep it looking great for longer.

5. If the epoxy floor has been scratched or deeply stained, it may require professional care such as sanding and refinishing to fully restore it.

What should you not use Pine-Sol on?

Pine-Sol should not be used on marble, granite, painted surfaces, aluminum, vinyl,- or any other surfaces not specified on the product label. It can cause staining, discoloration, and etching on some surfaces.

Additionally, it should not be used on rubber, fabric, upholstery, painting, lacquered surfaces, or any surface that might be damaged by a solvent such as Pine-Sol. When using Pine-Sol on any surface, first spot-test it in an inconspicuous area.

Finally, Pine-Sol should not be used to disinfect or sanitize food contact surfaces, or any type of medical device; US Environmental Protection Agency registered disinfectants should be used for that purpose.

Is it OK to use Pine-Sol on hardwood floors?

Generally, it is not recommended to use Pine-Sol on hardwood floors. Pine-Sol can be harmful for the finish of hardwood floors and may strip away the protective layer. Additionally, Pine-Sol is made up of various strong chemicals, many of which are harsh on delicate hardwood floors.

Water damage may also occur because of this, as Pine-Sol can be quite difficult to rinse off completely, which could lead to mold and mildew buildup in your hardwood floor.

Instead, it is best to use a mild detergent specifically made for wood floors. This is designed to be gentle and effective, without damaging the hardwood. Some natural cleaning solutions such as a mix of vinegar and water can also be used for light cleaning.

Is Pine-Sol a good floor cleaner?

Pine-Sol is a good floor cleaner and is especially effective at removing dirt and grime from floors. Its deep cleaning action penetrates and lifts away stains, leaving behind a long-lasting fresh scent.

It’s also safe to use on most hard surfaces, including laminate, vinyl, linoleum and ceramic tile floors, and it is less harsh than other cleaners. However, it’s not recommended for unsealed wood floors or for marble, granite and stone countertops.

Be sure to read the label for instructions on using Pine-Sol on a variety of surfaces and follow the directions on disinfecting surfaces.

Is Pine-Sol okay for laminate floors?

It is ok to use Pine-Sol on laminate floors as long as you follow the directions and are sure to use a lighter concentration and utilize a soft cloth. Pine-Sol is a liquid cleaner that is designed to break down and remove tough dirt and grime.

It is an effective cleaner for many hard surfaces and can be used safely on laminates. However, the consistency of laminate floors varies and it is important to practice caution when using Pine-Sol on laminate flooring.

When using Pine-Sol on laminates, it is important to dilute it in water before using it. A typical solution composition is 1/4 cup of Pine-Sol and one gallon of warm water. When using this solution, mop the floors with a soft cloth or mop for best results.

It is also important to make sure that you do not saturate the floors, as this can damage the laminate. Also, never use Pine-Sol on waxed or oil-treated laminates as this can cause discoloration and damage the finish.

Be sure to test the solution in an inconspicuous area to ensure that it won’t cause damage.

When cleaning your laminate floors with Pine-Sol, it is important to keep the area well-ventilated and take extra precaution when cleaning around children and pets. And be sure to rinse the floors with clean water to remove any residual Pine-Sol and ensure that the surface is free of any slippery spots that could cause slips or falls.

Overall, Pine-Sol can be safely used on laminate floors if instructions are followed and care is taken. By following these tips and directions Pine-Sol can be an effective cleaner for laminate floors and help keep them looking great.

Can I use Simple Green All-Purpose Cleaner on tile floors?

Yes, Simple Green All-Purpose Cleaner can be used on tile floors. The product is designed to be a safe, non-toxic cleaner that works well on hard, non-porous surfaces like tile. To use the cleaner, dilute it in a bucket of warm water according to the dilution instructions on the label and mop it onto the tile floor.

The floors should be rinsed afterward with plenty of clean water. For regular maintenance and light cleaning, it is sufficient to just use the cleaner in a warm water solution. For more stubborn soils, the cleaner can be applied undiluted directly to the floor and scrubbed with a brush or sponge.

What surfaces can simple green be used on?

Simple Green can be used on many hard and soft surfaces, including:

















-Pressure Washers


-Outdoor Furniture

-Sports Equipment




-Boat Accessories

-Auto Interiors & Exteriors

-Painted Walls & Ceilings.

Simple Green is also a great multi-purpose cleaner solution which can be used on any area of the home, car, garage, and other outdoor areas. that is safe to use around children and pets.

Does Simple Green melt plastic?

No, Simple Green does not melt plastic. Simple Green is a cleaning product made from a blend of biodegradable surfactants, water softeners, builders and skin-safe alkaline pH adjusters. The product claims to be safe for use on metal, plastic, glass, rubber and vinyl surfaces, but does not indicate it has the capability to melt plastic.

In fact, Simple Green can actually help to protect and restore plastic surfaces when used as directed.

Is Simple Green safe to use on painted surfaces?

Yes, Simple Green is generally safe to use on painted surfaces. It is important to keep in mind that Simple Green is a highly concentrated, powerful cleaning solution and should be used according to the instructions and in accordance with the manufacturer’s recommendations.

It is also important to use Simple Green in diluted form and to test it on any surface you anticipate cleaning with it. Simple Green should be allowed to dwell on the surface briefly before it is rinsed and allowed to air dry, as it can sometimes cause staining and discoloration if it is left to sit for too long.

It is also important to use a clean cloth when applying Simple Green to painted surfaces, as it can sometimes strip the protective sealant on the paint if applied directly.

What is the cleaner for a garage floor?

Using the appropriate cleaner for your garage floor is essential to keep the space clean and safe. Typically, a mild soap and water solution is the best option for cleaning a garage floor. A simple solution of dishwashing liquid and warm water can be used, but there are specialized garage floor cleaners available.

Depending on the type of flooring you have and the level of dirt and grime, you may want a stronger cleaner. For tougher jobs, a pressure washer or cleaning solution specifically designed for garage floors can be used.

Make sure to read and follow the directions on any cleaner you use, as some may require special rinsing or precautions. Generally, after applying a cleaner to the floor, it’s a good idea to scrub and rinse with a mop or wet vacuum.

You can also use a soft-bristled broom or fine-grade steel wool to get rid of tougher dirt or grime. Once you’ve finished, ensure the floor is completely dry before adding any type of sealer, wax, or protective coating.

Do you have to rinse after using Simple Green?

Yes, it’s important to rinse after using Simple Green. Simple Green is a cleaning product used to safely remove dirt and contaminants from hard surfaces. When using it, it is important to rinse the surface with water afterwards in order to remove any remaining residue of the cleaning product.

Failure to rinse after use can leave a soapy residue that can in turn attract dirt and cause your cleaning job to become undone. Additionally, Simple Green has pH neutral detergents and may still have an effect on certain surfaces, such as natural stone countertops.

If a surface is not rinsed after using Simple Green, there is a chance it could be damaged. As such, it is always best to ensure that any surface cleaned with Simple Green is rinsed afterwards to ensure it has been properly cleaned and to prevent any potential damage.

What are the disadvantages of epoxy flooring?

Epoxy flooring can be a great choice for many homes and businesses, but it has some potential disadvantages to consider.

One of the biggest disadvantages is the cost. The cost of epoxy flooring varies depending on factors like the type of floor, the size of the area, the existing condition of the floor, the preparation needed and the type of epoxy material.

In some cases, the cost of professional installation can be quite high.

Another potential issue is that it may not be able to withstand extreme temperatures and environmental factors. Depending on the type of epoxy used, it can begin to break down in extreme temperatures, so it’s important to be aware of your climate before investing in this type of flooring.

Epoxy flooring is also difficult to repair, and multiple applications may be necessary to restore the original finish.

Lastly, epoxy flooring can be difficult to clean and maintain. Specialised cleaning products are often necessary to keep it looking its best, and it can be easy to damage the finish if it isn’t cleaned properly.