Thompson’s Water Seal is a waterproofer and wood sealant designed to protect wood from water damage, mold, and mildew. While Thompson’s Water Seal does offer a latex-based variant, the standard Thompson’s Water Seal product does not contain latex.
It is a petroleum-based emulsion that is composed of various oils and other sealants. The latex-based variant is a water-based acrylic emulsion and is designed to provide better weatherproofing, better waterproofing, and greater flexibility and adhesion.
Thompson’s Water Seal is the ideal choice to protect your outdoor wood surfaces, regardless of the type you choose.
What is Thompson’s water sealer made of?
Thompson’s Water Sealer is a water-based sealer that contains a mixture of rubber latex, conventional acrylic, and a proprietary acrylic blend. It is designed to protect outdoor wood surfaces from rain, sun, and other harsh weather conditions.
The latex provides superior waterproofing, while the acrylic adds durability and helps reduce water absorption. The proprietary blend is designed to bond the sealer to the wood surface, creating a protective barrier.
Additionally, Thompson’s Water Sealer can also be used to preserve decks, fences, patios, patio furniture, and other outdoor wood items. It can even be used to seal concrete and masonry, though it’s best to consult a qualified contractor before doing so.
Thompson’s Water Sealer comes in both a clear and a tinted version for those who prefer to add a bit of color to their wood surfaces.
What type of sealer is Thompson Water Seal?
Thompson Water Seal is a highly durable, clear waterproofing sealer. It is designed to provide excellent protection against water damage and the damaging effects of ultraviolet rays. It is made using a specially formulated blend of synthetic resins and oils designed to protect wood, brick, concrete, vinyl, stucco, and other surfaces from moisture and other environmental elements.
The product can be applied with a brush, roller, or sprayer, and after drying, it forms an invisible barrier against the damaging effects of rain, snow, and ice. Thompson Water Seal is a water repellent, mildew resistant coating that helps protect and preserve the natural beauty of outdoor surfaces such as decks, patios, fences, and siding.
It also provides superior protection against cracking, splitting, and warping.
Does Thompson Water Seal have oil in it?
No, Thompson’s WaterSeal does not contain any oil. It is a water-based product made from a multi-polymer compound that is formulated to provide protection to vertical surfaces, including decks, fencing and outdoor structures.
It helps to waterproof surfaces and prevent water damage, but it does not contain any oil or grease. Instead, Thompson’s WaterSeal uses advanced polymers that create a barrier, allowing the product to penetrate deep into the surface to create a high level of protection.
What is decking oil made of?
Decking oil is typically a mixture of oil, often linseed or tung oil, combined with various types of resins to make an oil-based wood preservative. Sometimes these oils are blended with colorants, alkyd resins, or other additives to create decking oils with various colors or additional characteristics, such as UV protection or moisture repellency.
The type of oil and additives used, along with the ratio of each, will determine the characteristics of the particular combination. Decking oil is popular for many types of outdoor wood surfaces, such as decks, fences, and pergolas, due to its water-repellent and color-enhancing properties.
When applied correctly, it can protect the wood short-term from cracking, splitting, and color fading while creating a beautiful natural finish.
Should I use Thompson water Seal on pressure treated wood?
Thompson Water Seal is a waterproofing product designed for use on a variety of materials, including pressure treated wood. As with any product, it is important to follow directions for best results.
If Thompson Water Seal is used on pressure treated wood, it is important to properly prepare the surface. Allow the wood to dry for several days, if recently purchased or recently treated with chemicals, and then use a putty knife or sandpaper to remove any particles or curs.
Once the wood is clean and dry, apply an oil-based primer recommended for treating wood to seal the wood’s pores and prevent splintering. Once the primer is completely dry, apply the Thompson Water Seal according to the directions.
Allow it to dry overnight and another coat may be applied if desired. If a colored sealer is desired, it would be best to apply the color sealer after applying the Thompson Water Seal in order to achieve the best results.
Can you use too much Thompson Water Seal?
Yes, it is possible to use too much Thompson Water Seal. The product should be applied according to the instructions on the label. Applying more than the recommended amount could lead to several issues, such as problems with adhesion to the surface, an uneven finish, and excess run-off.
If a thicker coating is desired, it is best to apply multiple thin coats of the product, rather than one thick coat.
Why is my deck sticky after sealing?
There could be a few reasons as to why your deck is sticky after sealing. The most common cause is improper preparation. If you don’t give the deck a thorough cleaning before sealing it, any dirt, dust, and debris will stay on the surface, which can actually cause the sealant to trap it and make it sticky.
Additionally, the wrong sealant may be making the surface sticky. Choose a sealant that’s labeled as a “natural finish” sealer or a “penetrating sealer” in order to keep the surface from becoming sticky.
Another cause could be too much sealant being applied. If you put on a thick layer, it may leave a sticky residue. Finally, if you seal the deck in direct sunlight or if the surface temperature is too warm, the sealant may not be able to cure properly and leave a sticky residue.
How many coats of Thompson’s water Seal do I need?
The amount of coats of Thompson’s Water Seal that you need will depend on the type of material you are sealing and the desired level of protection. For typical application rates on wood and masonry surfaces, one coat is generally adequate.
However, for higher levels of protection and additional layers of protection, two or even three coats may be necessary. If you are unsure about the number of coats to apply, consult the product label or contact a representative of Thompson’s Water Seal for more specific information.