You can put anything on top of your nightstand that you desire, as long as it is decorative and not too tall. For example, a beautiful lamp may be a great addition to the nightstand to provide added lighting.
You could also add some books and magazines that you can easily access when you’re in bed. Additionally, you can add decor such as a small plant, a vase with flowers, a candle, a photo frame, or any other decorative item that you enjoy.
Consider incorporating some of your favorite items, colors, and textures that will make your nightstand a place where you will enjoy spending time.
How do you protect the top of a wooden dresser?
To protect the top of a wooden dresser, you should use a water-resistant or wax-based sealant on the wood surface. This will help to protect the wood against spills, stains, and any other damage that could be caused by daily use.
Once the sealant is dry, you can then place a piece of glass or durable acrylic over the top to provide an additional layer of protection. Make sure the glass or acrylic is thick enough to prevent any scraping or scratching of the wood surface over time.
Additionally, you could use felt pads under any items that are placed on top of the dresser such as lamps or small sculptures to avoid any chipping or discoloration. Finally, using trays and coasters for any cups or glasses that are placed on the dresser will minimize any moisture damage and help to maintain the quality look of the dresser.
How do you decorate the top of a nightstand?
Depending on your style, space, and budget. For example, you could place an accent lamp, a decorative vase, and a framed photograph to create a warm and inviting atmosphere. If you have a bit of extra space on top of your nightstand, stack a few hardcover books and place a figurine or sculpture on top of them.
You could also add a few fresh flowers or a small succulent in a container, to brighten up the nightstand. If your nightstand has a specific wood finish, it’s worth considering sticking to a neutral colour palette for the items that you choose, to tie the look together.
Alternatively, you could apply a contrasting colour scheme – such as white against deep, dark wood – to create an eye-catching display. You could also consider adding a decorative tray to your nightstand, to create a place to store the items that you need most often, such as your watch, phone charger, and any other items.
With these easy tips, you’ll have no problem styling the top of your nightstand, no matter what kind of decor you’re going for.
Should nightstand be higher than bed?
The height of your nightstand in relation to your bed is a matter of personal preference. Some people may prefer their nightstand to be level with or slightly below the top of their mattress, while others may prefer it to be slightly above their mattress.
Ultimately, the decision comes down to whatever you feel most comfortable with.
If you want your nightstand to be higher than your bed, there are a few ways you can achieve this. Using risers or wooden blocks under the bed can raise the bed’s height and make it easier for you to reach your items on the nightstand.
Alternatively, you can purchase a taller nightstand or make one with furniture legs. Just make sure that your bed remains sturdy and level with the floor. It’s important to also consider how your nightstand may interact with the rest of your bedroom furniture; for instance, whether it will block any windows or obstruct the flow of the room.
Ultimately, you want to achieve a good balance that looks and feels right to you.
What is the purpose of the pull out tray on nightstand?
The pull out tray on a nightstand is a useful and often overlooked home accessory. Its primary purpose is to provide support and convenience when accessing items stored in the bedside. For example, having a nightstand with a pull out tray makes it easier to grab small items like remote controls, books, and tissue boxes that might otherwise get lost under the bed.
It can also be used to set down a cup of coffee or snack. In addition, the pull out tray is a great place to display decorative items which can add to the overall decor of the bedroom.
How do you organize a nightstand drawer?
Organizing a nightstand drawer can be a simple and satisfying endeavor. The key is to keep it as organized and as clutter-free as possible. Start by removing everything from the nightstand drawer and giving it a thorough clean.
Then, sort every item into different categories, such as books, skin care, stationery, and jewelry. If you have a specific nighttime routine, keep those items closer to the top or closer to the front.
This makes them easily accessible when you’re heading up to bed or when you’re getting ready in the morning.
Books, documents and magazines can be separated into their respective categories and organised into neat piles. Electronics can be organised too and stored in a unified manner (e. g. phone, headphones and charger in the back corner of the drawer, spare batteries and charging cable in the bottom).
Skin care products can be organised into small compartments such as draw dividers or a drawer tray. You can also stack small items such as jewelry or stationery items in boxes and stack them in the drawer.
Finally, add in drawer liners to help keep everything in place, and add in other elements such as scented sachets, comforting holder lights, or even a small houseplant to add a pleasant atmosphere. Keep your nightstand drawer free of excess clutter so that it’s easier to reach for the items you need at night or in the morning.
How do you refinish a damaged table top?
Refinishing a damaged table top can be a relatively simple task that can revitalize the look of an old or dated table. To refinish a damaged table top, you will need to follow a few steps:
1. Start by sanding the table top with a medium-grit sandpaper. If the damage is more severe, begin by using a rougher grit of sandpaper, then gradually work up to a medium grit. Wipe away any dust created by the sanding with a damp cloth.
2. Fill any scratches or gaps in the table top with wood putty, using a putty knife to smooth out the putty. Allow the putty to fully dry.
3. Apply a coat of primer to the table top using a paintbrush. A primer coat helps ensure that the paint sticks to the surface.
4. Once the primer is dry, apply any paint needed for your desired look. You can use a brush for smaller areas, but for a larger table top it works best to use a roller for even coverage. After the first coat of paint is dry, apply a second coat if needed.
5. For a smooth finish, use a fine-grit sandpaper to lightly sand the table top. This step will help eliminate any brush strokes, ensuring a more even finish.
6. To seal your newly refinished table top, you can apply polyurethane. Use a foam brush to evenly coat the table top, applying several thin layers with a small amount of time between each layer.
By following these steps and allowing adequate time for each step, you can easily refinish a damaged table top.
How do you refurbish a laminate dresser?
Refurbishing a laminate dresser can be an easy and fun DIY project, with some basic supplies and a little bit of creativity. The first step is to make sure the dresser is dry and free of dirt and grime.
You can clean it with a damp cloth and some gentle soap if necessary. Once the dresser is clean, prepare the surface. Fill any holes, dents or cracks with wood filler and use sandpaper to smooth out any rough spots.
After the surface is even and flat, use a primer to help the paint adhere better. When the primer is dry, you can choose your color or design and apply a paint of your choice. There are a variety of different types of paints that you could use, but spray paint makes the job the easiest.
If you use a different type of paint, use a brush designed for the type of paint you’re using and make sure to give it enough time to fully dry. Follow up with some sealant, such as a polyurethane or wax, to help protect it and give it a finished, polished look.
Lastly, add any hardware and enjoy your new, refurbished laminate dresser!.
How do you attach wood to furniture?
Depending on the type of furniture and the material of the wood.
For small projects, such as attaching new knobs or drawer pulls to dressers, the most common option is to use screws and anchors. To do this, select screws that are slightly longer than the thickness of the wood and countersink them into the material.
Use a drill bit slightly smaller than the diameter of the screw head to create the countersink, then use a screwdriver to drive the screws into the wood. Wall anchors can also be used if the wood you are attaching to is thin.
For joining large pieces of wood, such as attaching a wooden frame to a bed or a shelf to a wall, a variety of clamps, screws, and adhesive can be used. For many projects, dowel screws and pocket hole screws provide an easy way to join two pieces of wood together.
Clamps and mallets can also be used to temporarily hold two pieces of wood while they are being screwed together. For additional strength, you can use high-strength adhesives like Gorilla Glue and Heavy Duty Adhesive.
Be sure to apply the adhesive to both surfaces for the best results.
What do people put on top of their dressers?
People often put a variety of items on top of their dressers, including plants, candles, photographs, décor, small books or trinket boxes, vases, clocks, and other decorative items. Additionally, they may use the top of the dresser to store items like jewelry, perfumes and colognes, and other small items that need a place.
Depending on the style of the dresser, people can dress it up with a tray, serving as a designated area for all of their items. This can help keep things neat and organized.
What can I put on top of a dresser so it doesn’t scratch?
One option is to use some kind of fabric, like a tablecloth, to protect the surface of the dresser. This will prevent any damages from occurring due to shifting items. Coasters and mats are also great for protecting the surface, as they can reduce friction from items being moved around.
Using books or decorative boxes to hold your items and elevate them off of the surface can also protect the dresser. Acrylic or lucite trays can also be used to help protect your dresser while adding a decorative touch.
Finally, if all else fails and you’d rather not use any of the aforementioned items, consider using furniture wax or a polyurethane sealant to provide an extra layer of protection to your dresser.
What can you put on wood furniture to protect it?
Protecting wood furniture is important to maintain its beauty and integrity, and there are several methods you can employ to do so. One of the most common and easy methods is regular cleaning with a damp cloth, followed by drying with a clean, soft cloth.
This will help remove dust and dirt, preventing dirt and grime from damaging the surface.
Polishing the furniture with the appropriate furniture polish, oil, wax, or varnish can also help protect the wood from spills and scratches. Clear polishes and oils will preserve the natural beauty of the wood, while darker polishes can add a hint of color and shine.
Applying a coat of wax every few months will also help seal the wood surface and add an extra layer of protection.
Additionally, you can place felt protectors on the feet of wooden furniture to protect floors and other surfaces from scratching. Placing coasters or mats on wood surface will also help protect them from hot dishes and drinks, as well as preventing stains from spills.
It is important to ensure that any products used will not damage the wood, so always be sure to follow instructions carefully. Taking these simple steps will help to ensure that your wood furniture remains in good condition for many years.
What can I use to protect wood furniture?
Depending on what type of finish your furniture has, you can use furniture polish that is specifically made for that particular finish. For example, if your furniture has a lacquer finish, you can use a lacquer-specific furniture polish to protect it.
You can also use beeswax-based furniture polishes, which have natural sealing and protective qualities that can help protect the wood from water damage, scratches, and fading. Other items that can be used are felt pads on the bottom of chairs or other furniture pieces to prevent scratching of the floor, as well as furniture covers or blankets to protect it from dust, dirt, and dings while it is not in use.
Additionally, keeping your furniture out of direct sunlight and away from direct sources of heat can help protect your wood furniture over time.