Skip to Content

What can I use as a shower niche sill?

The first step in tiling a shower niche is to cut the metal niche trim to fit the dimensions. Next, you need to prepare the back wall for the niche. Next, use a trowel to apply thinset to the niche edges.

Make sure to wipe away any excess thinset before installing the pieces. Install each piece one at a time by sliding the blade between the main wall tile and the substrate. You will then need to install the top piece.

If you plan to install a linear niche, make sure that the inset line up with the tile line. Otherwise, the niche will look trippy and awkward. Also, if you’re using the niche to hold a showerhead, make sure the inset is long enough to prevent it from getting in the way.

For the best aesthetic results, you should leave a four to six-inch gap around the showerhead.

While it’s tempting to place your niche on the same wall as the shower head, it’s best to place it far enough away from the splash zone. Putting it too close to the shower stud wall will cause moisture to penetrate and lead to mildew.

You can avoid this problem by placing your niche on the opposite wall. Aside from avoiding the splash zone, the niche should be located far enough away from the shower valve to minimize any possible plumbing issues.

You can use a metal strip to fill your shower niche. Be sure to order a metal strip with enough length, as you will have to cut it to fit. Measure the longest point of the metal strip and cut accordingly.

This will make sure that water will drain properly and will prevent mould from growing. If you’re not comfortable with DIY work, hiring a professional is a good idea.

How do you tile a niche corner?

Tiling a niche corner can be a tricky task and should not be attempted if you are a novice tiler. Before beginning, you should make sure you have all of the right tools, materials, and measurements so that your tiling job is successful.

First, use a level and a straight edge to make the flat floor surface of the niche corner. This will be your baseline for laying any tiles and is crucial for having a good end product. Next, use a thin-set mortar and a notched trowel to attach a waterproof backerboard to the niche corner.

Then mix and apply a kind of mortar, such as mastic or thin-set, to the area with a notched trowel. This mortar should be about twice as thick as a bag of sugar.

Carefully lay the bottom row of tiles in the corner in a stair-step pattern, using spacers to make sure the grout lines are even. Then use one-quarter-inch spacers to lay the remaining tiles in a horizontal fashion, making sure the ends and edges of each tile lay flat against the edges of the corner.

Once the tile is in place, spread the grout in a circular motion along the joints in between the tiles with a rubber grout float. Start at the bottom of the tile and work your way to the top. Make sure you fill all of the joints between the tiles with grout and remove any excess grout with the edge of the float.

Finally, use a damp sponge to clean off any remaining grout residue on the tiles and let the grout dry. Your niche corner should now be complete and you will have successfully tiled it.

Do you tile the niche or wall first?

The answer to this question depends largely on the specifics of your project. Generally speaking, it is wise to tile the wall first and then to tile the niche. This will ensure that the wall tile lines up smoothly and correctly with the lines of the niche tile, creating a more uniform and attractive look.

Additionally, when while tiling the walls first, it provides extra support and substructure that can help to ensure that the tile on the niche will stay firmly in place.

In some cases, however, it may be more practical or cost-effective to tile the niche first and then the wall. If you’re dealing with precut tiles, for example, you can measure and cut the niche tile so that it fits exactly with the wall, eliminating unnecessary waste.

If this is the case, be sure to start with the niche since the tiles won’t be interchangeable when installed.

Ultimately, deciding which to tile first comes down to your individual project and what will be the most efficient, cost effective, and aesthetically satisfying.

How do you make a shower niche tile?

Making a shower niche tile requires a few steps to ensure that it is properly waterproofed and visually appealing.

First, measure the niche opening to determine the size and shape of the tiles you will need. Make sure to purchase the appropriate amount of tiles and any additional supplies such as waterproofing membrane or grout and caulk.

Next, begin laying out the tile in the center of the niche with your most complex cuts at the edges. If these edges require cutting, use a tile cutting tool along with a ruler and level. This will give you straight, precise cuts.

Once you have laid down the tile, you will need to grind it down so it is flush with the surface. This can be done with a rotary tool like a tile grinder.

Next, apply a sealant and waterproof membrane to protect the tile. This step can be omitted in some cases, but it is always a good idea to provide extra protection to the tile so it won’t be damaged by moisture.

Finally, apply grout and caulk to cover up any gaps and fill in any cracks. This will give the shower niche a finished appearance and will also provide an extra layer of protection for your tile. Allow the grout and caulk to dry before using the shower.

Making a shower niche tile can seem intimidating at first, but with the right supplies and some patience, it can be an easy DIY project.

Are shower niches worth it?

The answer to whether or not a shower niche is worth it depends largely on the particular homeowner’s needs. Shower niches are designed to make showering more luxurious and convenient by providing a space to store all bathing necessities like shampoo and soap.

This can be especially helpful if you have limited cabinet space, or if you’re an avid bather and prefer to have all products in arms reach. Additionally, these niches are generally installed at a comfortable height so no bending is necessary, making them especially convenient for those with disabilities or other physical limitations.

In addition to their practical benefits, shower niches also add significant aesthetic value to bathrooms by creating visual interest and symmetry. Niches are available in a variety of sizes, shapes and materials, making them easy to incorporate into almost any decor.

Overall, shower niches can be a great addition to the bathroom. They provide a functional, convenient and aesthetically pleasing place for a homeowner to store their bathing essentials and are worth considering if you’re looking to update your restroom.

Do you need bullnose tile for niche?

Bullnose tile may be needed for a niche, depending on the size and style of the tile. Bullnose is curved tile that finishes the edge of a surface. For example, it may be needed for the edge of a shower or bathtub if the tile chosen is a different color or size from the wall tile.

It can also be used around niches such as soap holders and decorative shelves to create a cohesive look. The recommended size for bullnose tile depends on the type of tile being used and the size of the niche.

For instance, if the tile being used is 3 inch square, a 3×6 or 4×4 bullnose might be needed to complete the edge of the niche. It is also important to consider trims and grout lines when determining the best size of bullnose tile.

If the tile being used has tight grout lines, then a smaller bullnose may be needed to ensure the grout lines are even and the design looks clean. If the tile being used is larger than 3 inches, then a larger bullnose may be needed.

Ultimately, the choice of bullnose tile is largely a matter of personal preference and should match the overall design aesthetic chosen for the space.

What is the standard size for a shower niche?

The standard size of a shower niche varies, depending on the application and the area in which it will be placed. Generally speaking, the typical shower niche size uses are 8″ wide by 24″ high, 13″ wide by 13″ high, 16″ wide by 16″ high, and 24″ wide by 24″ high.

However, some showers may require a custom size niche to fit their design. Additionally, the depth of the niche will depend on the overall depth of the shower wall. Common depths for the niche range from 4″ to 6″, although the exact depth may be determined by the specific needs of the installation.

Depending on the size of the niche, considerations should be made for the size of the tile that will be used and how wide of a grout line can be installed. A wider grout line can reduce the risk of cracking if the niche is overly heavy.

Lastly, it is important to consider the type of niche board being used with the installation as this material will dictate the amount of water that could potentially enter the substrate behind the shower wall.

How do you build a bathroom wall niche?

Building a bathroom wall niche is a great way to add extra storage for towels and other bathroom essentials. To build a wall niche, you’ll need several tools and materials, including stud finder, level, tape measure, drywall saw, 2-inch screws, drywall anchors, drywall compound, and a corner bead.

Step 1: Use the stud finder to locate the studs in the wall. If the area you wish to build the niche on is between two studs, you will need to add a wooden frame for the niche to attach to. In this case, use 2×4 boards and screws to secure the frame in place.

Step 2: Measure and mark out an area on the wall for the niche. Remove the drywall in this area by using the drywall saw. Measure the sides to ensure they are level.

Step 3: Use the 2-inch screws and drywall anchors to attach the corner bead to the sides of the niche. This will form the edges of the niche.

Step 4: Cover the corner bead with drywall compound and use a putty knife to smooth the surface. Allow it to dry before proceeding to the next step.

Step 5: Tape any seams you spot and apply another layer of drywall compound on them. Once everything is set to your desired level, paint the niche and the surrounding batten boards to match the other walls in your bathroom.

Following these steps will help you build a bathroom wall niche that is both functional and stylish.

Are shower niches hard to keep clean?

No, shower niches are actually quite easy to keep clean. In general, all you need to do is use a mild soap and warm water, and then dry it with a soft cloth. A good technique to use is to wipe down any surfaces that may have come in contact with water or soap products after each shower.

Additionally, you can use a dedicated cleaner designed specifically for the material the niche is made of to ensure the surface is properly sanitized, as well as reduce the build-up of calcium and lime deposits.

Lastly, you want to make sure you’re regularly removing any debris, such as soap scum or dirt, that may have accumulated, as this can make it more difficult to keep the niche clean. Taking these steps will help you keep your shower niche clean and looking great for many years to come.

Is shower niche expensive?

The cost of a shower niche will depend on a variety of factors, such as size, material, and installation. If you have an informally sized pre-made shower niche, it could be as low as $50 or even less.

However, if you were looking for a custom-built niche or something larger, prices can begin to rise well over $500. Things that can increase the cost of a shower niche include: installing it with a frame, using various materials that can add aesthetic value and texture/patterns such as tile, or customizing it to make it fit exactly in its designated space.

Additionally, if you want to install a few shelves for storage, the cost can also increase. Ultimately, the cost of a shower niche can vary from just a few dollars to well over $500.

Where is the place to put a niche in a shower?

Niche placement in showers can be a tricky business. The first thing you need to consider is how you will be using the niche. If you are using the niche for storage, then you will want to place it in an easily accessible location.

If you are using the niche for decoration, then you will want to place it in a more conspicuous location. The second thing you need to consider is the size of the niche. Make sure that the niche is not too large or too small for the space you have available.

The third thing you need to consider is the shape of the niche. Make sure that the niche is the right shape for the items you will be placing in it. The fourth thing you need to consider is the finish of the niche.

Make sure that the niche is the right finish for the look you are going for in your shower.

How many shower niches should you have?

The number of shower niches you should have depends on your individual preference, but generally speaking there should at least be one shower niche in any shower. Shower niches typically measure roughly 12”x18”, so they can easily fit in any standard shower, as well as larger showers and all kinds of designs.

Having multiple shower niches allows for added convenience, which can be especially useful if there are multiple users who require multiple storage needs. They can be used to store various items such as soap, shampoo, body wash, razors, and other bath items.

By using a niche to store your toiletries, you not only save floor space, but you also keep your items free from moisture, making it easy to reach for them when you’re in the shower. Ultimately, the answer to how many shower niches you should have is up to you, depending on your individual needs and preferences.

Are wall niches outdated?

No, wall niches are not outdated. In fact, wall niches are making a comeback as a popular decorative element in many modern homes. Because of their versatility, wall niches create an attractive way to display treasured items or show off artwork or photographs.

Wall niches are also an excellent way to provide both storage and an attractive focal point. Whether you choose to install a one-of-a-kind custom niche or find a pre-made niche to suit your decor, wall niches are a great way to combine practicality with beauty in your home.

Should a shower niche be slanted?

A shower niche should generally be made level, but there may be situations where it is beneficial to have a slanted niche. The most important thing to consider when building a shower niche is the style and layout of the space.

For instance, a niche that is recessed within a tiled wall may be slanted if the shower wall is curved and not flat.

Additionally, a slanted niche may be beneficial if there needs to be more space above the shower niche to accommodate a shelf or ledge for soaps and other items. Similarly, if you want to create an angular look in the space, a slanted niche can be used to draw attention to the unique design of the space or to subtly indicate a storage area.

Before building a slanted niche in a shower, it is important to make sure that the size and shape of the niche will fit the restroom’s overall design. Additionally, it is important to keep in mind that slanted niches may be harder to clean and may not be suitable for storing heavier items.

Overall, a shower niche should be level, but a slanted niche may be beneficial depending on the layout of the space.

Can you put shower niche on exterior wall?

Putting a shower niche on an exterior wall is possible; however, it can be more challenging than installing it on an interior wall. For one thing, you will need to ensure your shower niche is waterproof and water-resistant in order to protect your wall from water damage.

You will also need to make sure the wall is properly insulated to reduce the risk of condensation and mold formation. Depending on the type of exterior wall, you may also need to add additional sealant or insulation to make the niche waterproof.

In addition, you must make sure the niche is securely attached to the wall, as an improperly attached niche could become unstable in strong winds or extreme temperatures. Lastly, you must be extra vigilant about cleaning and inspecting the niche to make sure it does not become cracked or damaged due to weather.

Taking extra care with an exterior shower niche is important, but with the right preparation, it is definitely possible.

Where do you put soap dish in shower?

The best place to put a soap dish in the shower is on a wall or on the side of the shower. This is especially true if the dish is made of a material that is not waterproof. If there is a shelf or an area of flat, waterproof surface in the shower, then the soap dish can be placed there as well.

Be sure to place the dish in an area where it won’t easily get bumped or knocked over. If there are no flat surfaces in the shower, installing a wall-mounted soap dish is an option. Make sure that it is installed securely so that it won’t become a slipping hazard.

Can you add corner shelves to a tiled shower?

Yes, corner shelves can easily be added to a tiled shower. However, it is important to make sure you have the right supplies and tools to ensure the shelves are securely mounted to your wall. It is essential to use wall anchors for tile walls, as normal screws or nails will not grip securely to tile.

You also need to make sure the wall anchors are appropriate for the type of tile you are using (ceramic, marble, etc. ). Once you have the right supplies, you can install the corner shelf with the appropriate nails or screws.

Additionally, you may need to use grout or silicone sealant to ensure the shelves are water-proof. Installing corner shelves in a tiled shower can be a somewhat tricky job and its best to consult a professional if you are uncertain how to install them.

What is a standard niche size?

A standard niche size can vary greatly depending on the application and specific requirements. Generally, a niche is typically between 12-24 inches wide, 12-24 inches deep, and 12-18 inches high. If a niche is for storing toiletries or other items in a bathroom, a deeper niche may be desired.

It is important to consider what you plan to store in the niche when determining your niche size. For example, a niche for storing wine bottles should be deeper. Additionally, you may want to consider height limitations if you plan to incorporate lighting into your niche design.

The size of the niche should also complement the overall style of the room. If you are incorporating the niche into a modern design, you will likely want a more streamlined look, so shorter and wider dimensions may be desired.

If your room is more traditional, then your niche might be taller, creating more of an architectural feature. Finally, consider the size of the wall area that you have to work with when determining your ideal niche size.

How high should a niche be in a walk in shower?

The height of the niche in a walk-in shower depends on the specific shower design and the materials used. Generally, standard height for the niche shelf is between 40 and 48 inches, but this can include the pre-fabricated niche boxes or custom niches built onsite.

For pre-fabricated niches, the total height is typically between 3” and 8”, but for custom builds, the height can be slightly higher based on the shower dimensions.

The niche should be positioned at eye-level or a height that makes it easily accessible for users. If you’re concerned about water splashing on the niche shelf, it’s best to keep the niche slightly higher, especially in a shower without a glass door.

Taking into account the overall size and the materials used in the build of the niche and shower, the height should be adjustable according to the size of the user. For added safety and convenience, a grab bar can be added near the niche.

FInally, you should always work with a skilled plumber or contractor who is familiar with the shower structure and materials to ensure the proper installation of the niche to prevent any water damage and maintain the shower’s functionality.

How much does it cost to put in a shower niche?

Shower niches are a great way to add storage and style to your shower. However, before you start shopping for a shower niche, you need to know how much it will cost to put one in. The cost of a shower niche will vary depending on the size, style, and materials you choose.

Here are a few things to keep in mind when budgeting for a shower niche:

-The size of the shower niche will be the biggest determinant of cost. Larger niches will obviously cost more than smaller ones.

-The style of the shower niche can also affect cost. More elaborate niches with features like tiled shelves or recessed lighting will cost more than simple, rectangular niches.

-The materials you choose will also have an impact on cost. Niches made of stone or tile will typically be more expensive than those made of plastic or fiberglass.

Assuming you want a basic, rectangular shower niche that is approximately 32 inches wide by 18 inches deep, you can expect to pay somewhere between $100 and $300. If you go with a more elaborate niche, or one that is made of higher-end materials, your costs could be significantly higher.

Leave a comment

Your email address will not be published.